Search filters

List of works by Bernhard Elsener

A contribution to the surface characterization of alkali metal sulfates

An XPS analytical approach for elucidating the microbially mediated enargite oxidative dissolution

scientific article published on 20 February 2009

Arsenopyrite and pyrite bioleaching: evidence from XPS, XRD and ICP techniques

article

Breathing New Life into Historical Instruments. How to Monitor Corrosion

scientific article published in 2023

Characterization of implant materials in fetal bovine serum and sodium sulfate by electrochemical impedance spectroscopy. I. Mechanically polished samples

scientific article published on 01 December 2002

Characterization of implant materials in fetal bovine serum and sodium sulfate by electrochemical impedance spectroscopy. II. Coarsely sandblasted samples

scientific article published on October 1, 2003

Corrosion and passivation of amorphous and crystalline FeCr alloys in ethanol/water/HCl mixtures

Degradation of plasticized PVC for biomedical disposable device under soft x-ray irradiation

Determination of the corrosion rate inside historical brass wind instruments - Proof of concept

Determination of the limit of detection by X-ray photoelectron spectroscopy for As, Zn and Pb oxides in SiO2 matrix as model systems for environmental investigations

Dissolution of brass alloys naturally aged in neutral solutions – an electrochemical and surface analytical study

scholarly article in RSC Advances, vol. 6 no. 93, 2016

Effect of metalloids on the passivity of amorphous FeCr alloys

Effect of phosphorus concentration on the electronic structure of nanocrystalline electrodeposited Ni–P alloys: an XPS and XAES investigation

Electrochemical and XPS surface analytical studies on the reactivity of enargite

Electrochemical and XPS surface analytical study on the reactivity of Ni-free stainless steel in artificial saliva

Electrochemistry and surface chemistry of stainless steels in alkaline media simulating concrete pore solutions

article by D. Addari et al published November 2008 in Electrochimica Acta

Electroless deposited Ni–P alloys: corrosion resistance mechanism

article published in 2008

Electronic properties of TiO2-based materials characterized by high Ti3+ self-doping and low recombination rate of electron–hole pairs

scholarly article in RSC Advances, vol. 7 no. 4, 2017

Enargite by XPS

scientific article published in December 2002

Enargite oxidation: A review

article

Exploiting XPS for the identification of sulfides and polysulfides

scholarly article in RSC Advances, vol. 5 no. 93, 2015

Fe10Cr and Fe15Cr as Standards for Stainless Steel Surface Characterization, by XPS

scientific article published in December 2002

From Chemical to Structural Order of Electrodeposited Ni22P Alloy: An XPS and EDXD Study

How Surface Analysis Can Contribute to an Understanding of the Preventive Conservation of Brass Instruments

scientific article published in 2023

Nickel-free manganese bearing stainless steel in alkaline media—Electrochemistry and surface chemistry

scholarly article by Bernhard Elsener et al published April 2011 in Electrochimica Acta

Nondestructive Surface Depth Profiles from Angle-Resolved X-ray Photoelectron Spectroscopy Data Using the Maximum Entropy Method. I. A New Protocol

Nondestructive in-depth composition profile of oxy-hydroxide nanolayers on iron surfaces from ARXPS measurement

article

Quantitative evaluation of oxidative stress, chronic inflammatory indices and leptin in cancer patients: correlation with stage and performance status.

scientific article published in March 2002

Radiation-induced migration of additives in PVC-based biomedical disposable devices Part 2. Surface analysis by XPS

article published in 2003

Radiation-induced migration of additives in PVC-based biomedical disposable devices. Part 1. Surface morphology by AFM and SEM/XEDS

Role of the interface oxide film/alloy composition and stability of stainless steels

article

Spectroscopic evidence for clarifying the mechanism of toxic element removal by marble waste

scientific article published in 2022

Stainless Steels as Sustainable Solution for Concrete Reinforcement - From Laboratory to Practice

scientific article published on 11 May 2022

Stainless steel reinforcing bars - reason for their high pitting corrosion resistance

article by Bernhard Elsener et al published 21 September 2010 in Materials and Corrosion

Stainless steels: Passive film composition, pitting potentials, and critical chloride content in concrete

scientific article published on 25 February 2020

The corrosion resistance of electroless deposited nano-crystalline Ni–P alloys

scholarly article by Maura Crobu et al published March 2008 in Electrochimica Acta

The effect of the saliva formulation on brass corrosion

scientific article published on 11 October 2022

The surface of enargite after exposure to acidic ferric solutions: an XPS/XAES study

article

The surface of iron and Fe10Cr alloys in alkaline media

scientific article published in 2007

XPS analytical characterization of amorphous alloys: Fe70Cr10P13C7

XPS and ARXPS for Characterizing Multilayers of Silanes on Gold Surfaces

scientific article published on 11 March 2024

XPS and XAES analysis of copper, arsenic and sulfur chemical state in enargites

article