Search filters

List of works by Michael Preuss

A Comparison of Residual Stress Development in Inertia Friction Welded Fine Grain and Coarse Grain Nickel-Base Superalloy

article

A comparison of inertia friction welds in three nickel base superalloys

scholarly article by Michael Preuss et al published November 2006 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

A high-strength silicide phase in a stainless steel alloy designed for wear-resistant applications.

scientific article published on 10 April 2018

A synchrotron tomographic energy-dispersive diffraction imaging study of the aerospace alloy Ti 6246

An investigation of the oxidation behaviour of zirconium alloys using isotopic tracers and high resolution SIMS

Characterization of microplasticity in TiAl-based alloys

Comparative determination of the α/β phase fraction in α+β-titanium alloys using X-ray diffraction and electron microscopy

scholarly article by M.M. Attallah et al published November 2009 in Materials Characterization

Comparison of residual stresses in Ti–6Al–4V and Ti–6Al–2Sn–4Zr–2Mo linear friction welds

Crack opening displacements during fatigue crack growth in Ti–SiC fibre metal matrix composites by X-ray tomography

article

Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy

Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature

Determination of the high temperature elastic properties and diffraction elastic constants of Ni-base superalloys

Effect of neutron and ion irradiation on the metal matrix and oxide corrosion layer on Zr-1.0Nb cladding alloys

Effects of tooling on the residual stress distribution in an inertia weld

Electron backscatter diffraction study of dislocation content of a macrozone in hot-rolled Ti–6Al–4V alloy

scholarly article

Energy-input-based finite-element process modeling of inertia welding

Evaluation of the interfacial shear strength and residual stress of TiAlN coating on ZIRLO™ fuel cladding using a modified shear-lag model approach

Evolution of a laser shock peened residual stress field locally with foreign object damage and subsequent fatigue crack growth

article

Fatigue and Damage in Structural Materials Studied by X-Ray Tomography

article

Finite element process modelling of inertia friction welding advanced nickel-based superalloy

scholarly article by B. Grant et al published July 2009 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

From solid solution to cluster formation of Fe and Cr in α -Zr

article

High-temperature strain field measurement using digital image correlation

How the crystallography and nanoscale chemistry of the metal/oxide interface develops during the aqueous oxidation of zirconium cladding alloys

scholarly article by N. Ni et al published December 2012 in Acta Materialia

Identifying suboxide grains at the metal–oxide interface of a corroded Zr–1.0%Nb alloy using (S)TEM, transmission-EBSD and EELS

article

Imaging and strain mapping fibre by fibre in the vicinity of a fatigue crack in a Ti/SiC fibre composite

article

Importance of crystal orientation in linear friction joining of single crystal to polycrystalline nickel-based superalloys

scholarly article by M. Karadge et al published September 2008 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

In Situ Synchrotron Studies of Reversible and Irreversible Non-elastic Strain in a Two-Phase TiAl Alloy

Inertia friction welds between nickel superalloy components: Analysis of residual stress by eigenstrain distributions

scholarly article by A M Korsunsky et al published 3 December 2008 in Journal of Strain Analysis for Engineering Design

Inertia welding nickel-based superalloy: Part I. Metallurgical characterization

scholarly article by Michael Preuss et al published October 2002 in Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science

Inertia welding nickel-based superalloy: Part II. Residual stress characterization

scholarly article by Michael Preuss et al published October 2002 in Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science

Interfacial shear strength of Ti/SiC fibre composites measured by synchrotron strain measurement

Measurements of fibre bridging during fatigue crack growth in Ti/SiC fibre metal matrix composites

article

Methods for obtaining the strain-free lattice parameter when using diffraction to determine residual stress

Micromechanical analysis of internal stress development during single-fibre fragmentation testing of Ti/SiCf

article

Microstructural and Residual Stress Development due to Inertia Friction Welding in Ti-6246

Microstructure and properties of hot isostatically pressed powder and extruded Ti25V15Cr2Al0·2C

Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds

Microtexture Analysis of the Alumina Scale in Thermal Barrier Coatings

Quantitative investigation of micro slip and localization in polycrystalline materials under uniaxial tension

scholarly article

Residual stress fields after FOD impact on flat and aerofoil-shaped leading edges

article published in 2012

Residual stresses caused by head-on and 45° foreign object damage for a laser shock peened Ti–6Al–4V alloy aerofoil

Residual stresses due to foreign object damage in laser-shock peened aerofoils: Simulation and measurement

Residual stresses in face finish turning of high strength nickel-based superalloy

scholarly article by W. Li et al published June 2009 in Journal of Materials Processing Technology

Residual stresses in laser direct metal deposited Waspaloy

Strain accumulation and fatigue crack initiation at pores and carbides in a SX superalloy at room temperature

Strain localisation and failure at twin-boundary complexions in nickel-based superalloys

scientific article published on 29 September 2020

Stress relaxation of shot-peened UDIMET 720Li under solely elevated-temperature exposure and under isothermal fatigue

article

Synchrotron Strain Mapping of the Residual Strain Distribution around Foreign Object Damage in Laser Shock Peened Ti-6AL-4V Alloy

Synchrotron X-ray study of micromechanics of Ti/SiCfcomposites with fibres containing defects introduced by laser drilling

Texture development in Ti–6Al–4V linear friction welds

article

The effect of Sn concentration on oxide texture and microstructure formation in zirconium alloys

scholarly article by Alistair Garner et al published October 2015 in Acta Materialia

The effect of fibre fractures in the bridging zone of fatigue cracked Ti–6Al–4V/SiC fibre composites

article

The effect of β phase on microstructure and texture evolution during thermomechanical processing of α+β Ti alloy

article published in 2013

The microstructure and microtexture of zirconium oxide films studied by transmission electron backscatter diffraction and automated crystal orientation mapping with transmission electron microscopy

article

The role of surface condition, residual stress and microstructure on pre-yield cracking in Ti44Al8Nb1B

Thermal Relaxation of Residual Stresses in Nickel-Based Superalloy Inertia Friction Welds

scholarly article by M. Karadge et al published 1 February 2011 in Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science

X-ray microtomography studies of localised corrosion and transitions to stress corrosion cracking

X-ray tomographic imaging of Ti/SiC composites.

scientific article

Zirconium hydride precipitation kinetics in Zircaloy-4 observed with synchrotron X-ray diffraction