A Parametric Numerical Study in Cylindrical Oblique Fin Minichannel

A Simplified ‘Effective Circuit’ Fluid Flow Model for Forced Convection in Oblique Fin Configuration

A comparative study of experimental flow boiling heat transfer and pressure characteristics in straight- and oblique-finned microchannels

A comparative study of flow boiling heat transfer and pressure drop characteristics in microgap and microchannel heat sink and an evaluation of microgap heat sink for hotspot mitigation

A diagnostic tool for detection of flow-regimes in a microchannel using transient wall temperature signal

A numerical and experimental investigation of heat transfer and fluid flow characteristics of a cross-connected alternating converging–diverging channel heat sink

A numerical and experimental investigation of heat transfer and fluid flow characteristics of an air-cooled oblique-finned heat sink

A parametric investigation of heat transfer and friction characteristics in cylindrical oblique fin minichannel heat sink

A pump-free microfluidic 3D perfusion platform for the efficient differentiation of human hepatocyte-like cells

scientific article

A simulation and experimental study of fluid flow and heat transfer on cylindrical oblique-finned heat sink

article published in 2013

An Efficient Wavy Microchannel Heat Sink for Electronic Devices

An experimental study of flow friction and heat transfer in wavy microchannels with rectangular cross section

Analysis of Low-Grade Waste Heat Driven Systems for Cooling and Power for Tropical Climate

CFD Analysis of an Air-Cooled Planar Heat Sink With Cross-Connected Alternating Converging-Diverging Channels

Characteristics of Two-Phase Flow Boiling in Microgap Channel

Closure

Combustion performance and emission characteristics study of pine oil in a diesel engine

Comparative Study of Temperature and Pressure Instabilities During Flow Boiling in Straight- and 10° Oblique-Finned Microchannels

Comparison of Flow Boiling Characteristics Between Microgap and Microchannel

Conclusions and Future Works

Conclusions and Recommendations

Corrigendum to “A parametric investigation of heat transfer and friction characteristics in cylindrical oblique fin minichannel heat sink” [Int. J. Heat Mass Transfer 68 (2014) 567–584]

scholarly article published in International Journal of Heat and Mass Transfer

Coupled equivalent circuit models for fluid flow and heat transfer in large connected microchannel networks – The case of oblique fin heat exchangers

Cylindrical Oblique Fin Minichannel Structure

Dendrimer-encapsulated Pt nanoparticles in supercritical medium: synthesis, characterization, and application to device fabrication

scientific article published on 14 January 2009

Design and Operating Parameters

Developing forced convection in converging–diverging microchannels

Direct numerical simulation of fluid flow and heat transfer in periodic wavy channels with rectangular cross-sections

Droplet spreading on a two-dimensional wicking surface

scientific article

Dynamics of Wicking in Silicon Nanopillars Fabricated with Interference Lithography and Metal-Assisted Chemical Etching ⬇️

scientific article published on July 25, 2012

Effect of adding 1,4-Dioxane with kapok biodiesel on the characteristics of a diesel engine

Effects of structural and chemical anisotropy of nanostructures on droplet spreading on a two dimensional wicking surface

Effects of surface roughness on flow boiling in silicon microgap heat sinks

Effects of varying oblique angles on flow boiling heat transfer and pressure characteristics in oblique-finned microchannels

article published in 2016

Effects of varying secondary channel widths on flow boiling heat transfer and pressure characteristics in oblique-finned microchannels

Emission reduction from a diesel engine fueled by pine oil biofuel using SCR and catalytic converter

Enhanced Microchannel Heat Sinks Using Oblique Fins

Enhanced Thermal Transport in Microchannel Using Oblique Fins

Enhanced air-side performance of finned tube heat exchanger with oval obstacles for residential air-conditioning systems - numerical approach

article published in 2016

Enhanced heat transfer and reduced pressure drop using stepped fin microchannels

Enhanced transport phenomenon in small scales using chaotic advection near resonance

Experimental Investigation of Silicon-Based Oblique Finned Microchannel Heat Sinks

Experimental Study and High Speed Visualization of Flow Boiling Characteristics in Silicon Microgap Heat Sink

scholarly article published 9 November 2012

Experimental and finite element analysis of a coated diesel engine fueled by cashew nut shell liquid biodiesel

article by S. Vedharaj et al published February 2014 in Experimental Thermal and Fluid Science

Experimental and numerical investigation of a mini channel forced air heat sink designed by topology optimization

Experimental investigation and flow visualization to determine the optimum dimension range of microgap heat sinks

scholarly article by Tamanna Alam et al published December 2012 in International Journal of Heat and Mass Transfer

Experimental investigation of flow boiling heat transfer and instabilities in straight microchannels

article

Experimental investigation of flow boiling heat transfer in novel oblique-finned microchannels

Experimental investigation of kapok (Ceiba pentandra) oil biodiesel as an alternate fuel for diesel engine

article

Experimental investigation of local flow boiling heat transfer and pressure drop characteristics in microgap channel

Experimental investigation of microgap cooling technology for minimizing temperature gradient and mitigating hotspots in electronic devices

Experimental investigation of oblique finned microchannel heat sink +

Experimental investigation of the performance and emission characteristics of direct injection diesel engine by water emulsion diesel under varying engine load condition

Experimental investigation on heat transfer and pressure drop of a novel cylindrical oblique fin heat sink

Experimental investigations of flow boiling heat transfer and pressure drop in straight and expanding microchannels – A comparative study

Experimental study and empirical correlation development of fuel properties of waste cooking palm biodiesel and its diesel blends at elevated temperatures

Experimental study on laminar heat transfer in microchannel heat sink

Feasibility Study of a Parallel Plate Desiccant Coated Heat and Mass Regenerator for Dehumidification

Flow Boiling Heat Transfer and Pressure Drop Characteristics in Expanding Microgap Channel

Flow Boiling Heat Transfer, Pressure Drop, and Instabilities in Straight and Expanding (Sloping Fin) Microchannels: A Comparative Study

Flow Boiling Instabilities in Expanding Microgap Channel

article

Flow Boiling Performance in Scaled Up Expanding Channel Geometries: A Comparative Study Between Straight and Stepped Fin Minichannels

article

Flow Boiling in a Silicon Microchannel Array

Flow and Heat Transfer in Branched Wavy Microchannels

Flow boiling heat transfer and pressure drop characteristics in expanding silicon microgap heat sink

Flow boiling heat transfer and pressure drop in stepped fin microchannels

Flow boiling instability characteristics in expanding silicon microgap heat sink

Fluid flow and heat transfer in wavy microchannels

article published in 2010

Fluid flow and heat transfer investigations on enhanced microchannel heat sink using oblique fins with parametric study

Forced pulsatile flow to provoke chaotic advection in wavy walled microchannel heat sinks

Heat Exchanger Improvement Via Curved Microfluidic Channels: Impacts of Cross-Sectional Geometry and Dean Vortex Strength

Heat Exchanger Improvement via Curved Microfluidic Channels: Part 1 — Impact of Cross-Sectional Geometry and Channel Design on Heat Transfer Enhancement

article published in 2016

Heat Exchanger Improvement via Curved Microfluidic Channels: Part 2 — Investigation Into Heat Transfer Enhancement due to the Dynamics of Dean Vortices

Heat Transfer Characteristics of a Polymer-Based Roll-to-Roll Microchannel Heat Exchanger

Heat Transfer Enhancement in Microchannels Incorporating Slanted Grooves

Heat exchanger improvement via curved, angular and wavy microfluidic channels: A comparison of numerical and experimental results

Hot Spot Mitigating With Oblique Finned Microchannel Heat Sink

Hot-Spot Thermal Management With Flow Modulation in a Microchannel Heat Sink

Hotspot Mitigating With Obliquely Finned Microchannel Heat Sink—An Experimental Study

Impact of cross-sectional geometry on mixing performance of spiral microfluidic channels characterized by swirling strength of Dean-vortices

Impact of ignition promoting additives on the characteristics of a diesel engine powered by pine oil–diesel blend

Impact of pine oil biofuel fumigation on gaseous emissions from a diesel engine

Influence of nanoscale geometry on the dynamics of wicking into a rough surface

article

Infrared micro-particle image velocimetry measurements and predictions of flow distribution in a microchannel heat sink

Introduction

Introduction

Introduction

Investigation of evaporation and engine characteristics of pine oil biofuel fumigated in the inlet manifold of a diesel engine

Investigation of flow boiling characteristics in expanding silicon microgap heat sink

Investigation of flow boiling instabilities in silicon microgap heat sink

Investigation of fluid flow and heat transfer in wavy micro-channels with alternating secondary branches

Investigation of heat transfer in rectangular microchannels

Investigation of mass transport in a spiral microfluidic network with an expansion chamber

Investigation on the influence of edge effect on flow and temperature uniformities in cylindrical oblique-finned minichannel array

article published in 2014

Investigations on the Influence of Flow Migration on Flow and Heat Transfer in Oblique Fin Microchannel Array

Mathematical modeling and performance evaluation of a desiccant coated fin-tube heat exchanger

Methodology for more accurate assessment of heat loss in microchannel flow boiling

Methods and techniques of improving experimental testing for microfluidic heat sinks

Mixing Enhancement in Spiral Microchannels

Nucleate Boiling in Microchannels

Numerical Investigation of Cross-Connected Alternating Converging-Diverging Channels

Numerical Study of Fluid Flow and Heat Transfer in the Enhanced Microchannel With Oblique Fins

article published in 2013

Numerical Study of Heat Transfer Enhancement of Roll-to-Roll Microchannel Heat Exchangers

Numerical investigation of the thermal-hydraulic performance of finned oblique-shaped tube heat exchanger

article published in 2016

Numerical modeling and thermal enhancement of finned tube heat exchanger with guiding channel and fusiform configurations

Numerical simulation for optimizing the design of a commonly-used fluid distributor to enhance uniform distribution and reduce dead zones

Numerical simulations of forced convection in novel cylindrical oblique-finned heat sink

Numerical study of fluid flow in different manifold configurations for vanadium redox flow battery

Operation of neat pine oil biofuel in a diesel engine by providing ignition assistance

Optimization of Microgap Channel Dimension and Operating Condition

scientific article

Optimization of combustion bowl geometry for the operation of kapok biodiesel – Diesel blends in a stationary diesel engine

article by S. Vedharaj et al published January 2015 in Fuel

Optimization of the Thermal Performance of Microchannel Heat Sinks Using Thermally Developing Nusselt Number Correlation

Performance Emission and Economic Analysis of Preheated CNSL Biodiesel as an Alternate Fuel for a Diesel Engine

Pine oil–biodiesel blends: A double biofuel strategy to completely eliminate the use of diesel in a diesel engine

Planar Oblique Fin Microchannel Structure

Prediction of the onset of nucleate boiling in microchannel flow

article published in 2005

Pressure drop characteristics and instabilities during flow boiling in parallel and oblique finned microchannels - a comparative study

Rapid Prototyping of Polymer-Based Rolled-Up Microfluidic Devices

scientific article published on 13 October 2018

Reduction of harmful emissions from a diesel engine fueled by kapok methyl ester using combined coating and SNCR technology

article published in 2014

Saturated flow boiling heat transfer and pressure drop in silicon microchannel arrays

Study of Performance Impact by Thermo-Hydraulic Developing Entrance in Spiral Microchannel With CFD Analysis

Study of transient heat transfer and synchronized flow visualizations during sub-cooled flow boiling in a small aspect ratio microchannel

scholarly article by Mrinal Jagirdar & PS Lee published July 2016 in International Journal of Multiphase Flow

Surface Roughness Effect on Microgap Channel

Temperature Transients for Detection of Flow-regimes in a Mini/Microchannel

Thermally developing flow and heat transfer in rectangular microchannels of different aspect ratios

Transient Evolution of Heat Transfer Performance During Flow Boiling in a Microchannel

Two-Phase Microgap Channel Cooling Technology for Hotspots Mitigation

Two-Phase Microgap Channel in Mitigating Flow Instabilities and Flow Reversal

Ultra-thin minichannel LCP for EV battery thermal management