List of works - Aïcha Hessler-Wyser

22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collector

A Review of RedOx Cycling of Solid Oxide Fuel Cells Anode

scientific article (publication date: 31 August 2012)

An Indium-Free Anode for Large-Area Flexible OLEDs: Defect-Free Transparent Conductive Zinc Tin Oxide

Design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid oxide fuel cell. Part II: Electrical, electrochemical and microstructural characterization of tape-cast cells

Energy-filtered environmental transmission electron microscopy for the assessment of solid-gas reactions at elevated temperature: NiO/YSZ-H2 as a case study.

scientific article

Enhancing the optoelectronic properties of amorphous zinc tin oxide by subgap defect passivation: A theoretical and experimental demonstration

scholarly article in Physical Review B, vol. 95 no. 24, June 2017

Hydrogen plasma treatment for improved conductivity in amorphous aluminum doped zinc tin oxide thin films

scholarly article by Monica Morales-Masis et al published September 2014 in APL Materials

In Situ TEM Analysis of Organic-Inorganic Metal-Halide Perovskite Solar Cells under Electrical Bias

scientific article

In situ Reduction and Oxidation of Nickel from Solid Oxide Fuel Cells in a Transmission Electron Microscope

article

In situ TEM analysis of structural changes in metal-halide perovskite solar cells under electrical bias

article

In situ redox cycle of a nickel–YSZ fuel cell anode in an environmental transmission electron microscope

article

Increasing Polycrystalline Zinc Oxide Grain Size by Control of Film Preferential Orientation

Measurements of local chemistry and structure in Ni(O)–YSZ composites during reduction using energy-filtered environmental TEM

Metallization of Si heterojunction solar cells by nanosecond laser ablation and Ni-Cu plating

Modification of textured silicon wafer surface morphology for fabrication of heterojunction solar cell with open circuit voltage over 700 mV

Oxidation mechanism of nickel particles studied in an environmental transmission electron microscope

article

Properties of interfaces in amorphous/crystalline silicon heterojunctions

Reduction of nickel oxide particles by hydrogen studied in an environmental TEM

scholarly article by Q. Jeangros et al published 28 November 2012 in Journal of Materials Science

Self-Patterned Nanoparticle Layers for Vertical Interconnects: Application in Tandem Solar Cells

scientific article published on 11 August 2014

Silicon Filaments in Silicon Oxide for Next-Generation Photovoltaics

scientific article published on 30 January 2012

Silver thick-film contacts on highly doped n-type silicon emitters: Structural and electronic properties of the interface

Three-dimensional chemical analysis of laser-welded NiTi–stainless steel wires using a dual-beam FIB

Tuning the Optoelectronic Properties of ZnO:Al by Addition of Silica for Light Trapping in High-Efficiency Crystalline Si Solar Cells

article

List of works by Aïcha Hessler-Wyser

22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collector

A Review of RedOx Cycling of Solid Oxide Fuel Cells Anode

An Indium-Free Anode for Large-Area Flexible OLEDs: Defect-Free Transparent Conductive Zinc Tin Oxide

Design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid oxide fuel cell. Part II: Electrical, electrochemical and microstructural characterization of tape-cast cells

Energy-filtered environmental transmission electron microscopy for the assessment of solid-gas reactions at elevated temperature: NiO/YSZ-H2 as a case study.

Enhancing the optoelectronic properties of amorphous zinc tin oxide by subgap defect passivation: A theoretical and experimental demonstration

Hydrogen plasma treatment for improved conductivity in amorphous aluminum doped zinc tin oxide thin films

In Situ TEM Analysis of Organic-Inorganic Metal-Halide Perovskite Solar Cells under Electrical Bias

In situ Reduction and Oxidation of Nickel from Solid Oxide Fuel Cells in a Transmission Electron Microscope

In situ TEM analysis of structural changes in metal-halide perovskite solar cells under electrical bias

In situ redox cycle of a nickel–YSZ fuel cell anode in an environmental transmission electron microscope

Increasing Polycrystalline Zinc Oxide Grain Size by Control of Film Preferential Orientation

Measurements of local chemistry and structure in Ni(O)–YSZ composites during reduction using energy-filtered environmental TEM

Metallization of Si heterojunction solar cells by nanosecond laser ablation and Ni-Cu plating

Modification of textured silicon wafer surface morphology for fabrication of heterojunction solar cell with open circuit voltage over 700 mV

Oxidation mechanism of nickel particles studied in an environmental transmission electron microscope

Properties of interfaces in amorphous/crystalline silicon heterojunctions

Reduction of nickel oxide particles by hydrogen studied in an environmental TEM

Self-Patterned Nanoparticle Layers for Vertical Interconnects: Application in Tandem Solar Cells

Silicon Filaments in Silicon Oxide for Next-Generation Photovoltaics

Silver thick-film contacts on highly doped n-type silicon emitters: Structural and electronic properties of the interface

Three-dimensional chemical analysis of laser-welded NiTi–stainless steel wires using a dual-beam FIB

Tuning the Optoelectronic Properties of ZnO:Al by Addition of Silica for Light Trapping in High-Efficiency Crystalline Si Solar Cells

Zinc blende–wurtzite polytypism in nanocrystalline ZnO films