3D finite-element modelling of splitting crack propagation

A critical examination of statistical nanoindentation on model materials and hardened cement pastes based on virtual experiments

article

A numerical and experimental study of aggregate-induced shrinkage cracking in cementitious composites

A poromechanics model for plastic shrinkage of fresh cementitious materials

A simple method for determining the total amount of physically and chemically bound water of different cements

article by Pietro Lura et al published 6 June 2017 in Journal of Thermal Analysis and Calorimetry

A volumetric technique for measuring the coefficient of thermal expansion of hardening cement paste and mortar

An inter lab comparison of gas transport testing procedures: Oxygen permeability and oxygen diffusivity

An investigation on the use of zeolite aggregates for internal curing of concrete

article published in 2013

Application of neutron imaging to investigate fundamental aspects of durability of cement-based materials: A review

Assessing the role of the pore solution concentration on horizontal deformations in an unsaturated soil specimen during drying

scholarly article

Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms

article published in 2003

Controlling the coefficient of thermal expansion of cementitious materials – A new application for superabsorbent polymers

Cracking in cement paste induced by autogenous shrinkage

article

Dark-field X-ray imaging of unsaturated water transport in porous materials

E-modulus of the alkali–silica-reaction product determined by micro-indentation

article published in 2013

Early development of properties in a cement paste: A numerical and experimental study

article

Early-age acoustic emission measurements in hydrating cement paste: Evidence for cavitation during solidification due to self-desiccation

article

Early-age elastic properties of cement-based materials as a function of decreasing moisture content

Effect of curing temperature and type of cement on early-age shrinkage of high-performance concrete

Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test

Ethyl silicate for surface treatment of concrete – Part II: Characteristics and performance

Expansive high-performance concrete for chemical-prestress applications

Experimental observation of internal water curing of concrete

Focussed ion beam nanotomography reveals the 3D morphology of different solid phases in hardened cement pastes

scientific article published on 09 September 2010

Impact of admixtures on the plastic shrinkage cracking of self-compacting concrete

Impact of rapid-hardening cements on mechanical properties of cement bitumen emulsion asphalt

Influence of cement content and environmental humidity on asphalt emulsion and cement composites performance

Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio

Internal curing with lightweight aggregate produced from biomass-derived waste

Measurement of water transport from saturated pumice aggregates to hardening cement paste

Measuring techniques for autogenous strain of cement paste

Modeling of Water Migration during Internal Curing with Superabsorbent Polymers

Modeling of internal curing in maturing mortar

article

Modelling of water permeability in cementitious materials

Moisture dependence of thermal expansion in cement-based materials at early ages

Neutron radiography of heated high-performance mortar

Nonlinear elastic response of thermally damaged consolidated granular media

article

On the measurement of free deformation of early age cement paste and concrete [Bjøntegaard Ø, Hammer TA, Sellevold EJ. Cement & Concrete Composites 2004;26:427–435]

On the origin of eigenstresses in lightweight aggregate concrete

article published in 2004

Overview on cold cement bitumen emulsion asphalt

Performance of passive methods in plastic shrinkage cracking mitigation

Pore structure of mortars with cellulose ether additions – Mercury intrusion porosimetry study

article

Prediction of self-desiccation in low water-to-cement ratio pastes based on pore structure evolution

Real-time measurements of temperature, pressure and moisture profiles in High-Performance Concrete exposed to high temperatures during neutron radiography imaging

Reduction of fire spalling in high-performance concrete by means of superabsorbent polymers and polypropylene fibers

Release of internal curing water from lightweight aggregates in cement paste investigated by neutron and X-ray tomography

Shrinkage and creep of SCC – The influence of paste volume and binder composition

article

Simultaneous measurements of heat of hydration and chemical shrinkage on hardening cement pastes

Solvent-based ethyl silicate for stone consolidation: influence of the application technique on penetration depth, efficacy and pore occlusion

Special Section on Advances in Internally Cured Concrete

Study of physical properties and microstructure of aerogel-cement mortars for improving the fire safety of high-performance concrete linings in tunnels

scientific article

Study on the development of the microstructure in cement-based materials by means of numerical simulation and ultrasonic pulse velocity measurement

article

Techniques and materials for internal water curing of concrete

The effect of external load on internal relative humidity in concrete

Use of TEOS for fired-clay bricks consolidation

Validity of recent approaches for statistical nanoindentation of cement pastes

X-ray dark-field contrast imaging of water transport during hydration and drying of early-age cement-based materials