List of works - António Ramos

A Device to Control Implant and Bone-Cement Temperatures in Cemented Arthroplasty

A fiber optic buckle transducer for measurement of in vitro tendon strain

A new condyle implant design concept for an alloplastic temporomandibular joint in bone resorption cases

scientific article

A new press-fit stem concept to reduce the risk of end-of-stem pain at revision TKA: A pre-clinical study

scientific article published on 26 January 2012

A systematic approach for an accuracy level using rapid prototyping technologies

Acoustic field modeling for physiotherapy ultrasound applicators by using approximated functions of measured non-uniform radiation distributions ⬇️

scientific article published on February 17, 2012

Altering the Course of Technologies to Monitor Loosening States of Endoprosthetic Implants

scientific article published on 23 December 2019

An ex vivo experimental study of strain and stiffness of different cadaveric mandible condyle sizes

scientific article published on 31 July 2015

Biomechanical Analysis Comparing Natural and Alloplastic Temporomandibular Joint Replacement Using a Finite Element Model

article

Biomechanical analysis of total elbow replacement with unlinked iBP prosthesis: An in vitro and finite element analysis

article

Biomechanical evaluation of different reconstructive techniques of proximal tibia in revision total knee arthroplasty: An in-vitro and finite element analysis.

scientific article

Biomechanical evaluation of proximal tibia behaviour with the use of femoral stems in revision TKA: An in vitro and finite element analysis

article

CAD‐CAM‐RTV – lost‐wax casting technology for medical implants

article published in 2009

Christensen vs Biomet Microfixation alloplastic TMJ implant: Are there improvements? A numerical study.

scientific article published on 29 July 2015

Combined Bone-Implant Fixation: A Pre-Clinical Hip Stem Evaluation

Comparative assessment of different reconstructive techniques of distal femur in revision total knee arthroplasty

scientific article

Comparison of load transfers in TMJ replacement using a standard and a custom-made temporal component.

scientific article published on 14 June 2014

Compression, shear and bending on tissue-engineered cartilage: a numerical study.

scientific article published in January 2014

Effect of Occlusal Splints on the Stress Distribution on the Temporomandibular Joint Disc

scientific article published in May 2017

Evaluation of a primary TMJ implant fixation using screws: a numerical study

scientific article

Experimental and numerical predictions of Biomet(®) alloplastic implant in a cadaveric mandibular ramus.

scientific article published on 11 February 2016

Experimental and numerical study of the biomechanics of a human joint

scholarly article published September 2015

Failure analysis of C-5 after total disc replacement with ProDisc-C at 1 and 2 levels and in combination with a fusion cage: finite-element and biomechanical models

scientific article published on 06 March 2015

Fibre Bragg grating sensing and finite element analysis of the biomechanics of the mandible

scholarly article published 23 May 2005

Finite element analysis to predict short and medium-term performance of the anatomical Comprehensive® Total Shoulder System

scientific article published on 12 March 2022

Finite element modelling and experimental validation of a total implanted shoulder joint

scientific article published on 08 May 2021

How can the orientation of CT scanning undermine the biomechanical performance of the intact mandible? A finite element study

scholarly article by H.R. Marques et al published 3 October 2013 in Computer methods in biomechanics and biomedical engineering. Imaging & visualization

Improved stability with intramedullary stem after anterior femoral notching in total knee arthroplasty

scientific article published on 01 June 2011

Influence of the scaffold geometry on the spatial and temporal evolution of the mechanical properties of tissue-engineered cartilage: insights from a mathematical model

scientific article published on 24 March 2015

Influences of geometrical and mechanical properties of bone tissues in mandible behaviour - experimental and numerical predictions.

scientific article published on 26 April 2017

Influences of implant condyle geometry on bone and screw strains in a temporomandibular implant.

scientific article published on 29 May 2013

Instrumented hip implants: electric supply systems

scientific article

Instrumented hip joint replacements, femoral replacements and femoral fracture stabilizers

scientific article

Load transfer in Christensen(®) TMJ in alloplastic total joint replacement for two different mouth apertures

scientific article published on 2 May 2014

MULTI-SOURCE ENERGY HARVESTING POWER GENERATORS FOR INSTRUMENTED IMPLANTS - Towards the Development of a Smart Hip Prosthesis

article

Multi-source Harvesting Systems for Electric Energy Generation on Smart Hip Prostheses

article published in 2013

New cosurface capacitive stimulators for the development of active osseointegrative implantable devices

scientific article

Percutaneous vertebroplasty: a new animal model

scientific article published on 30 June 2016

Prediction at long-term condyle screw fixation of temporomandibular joint implant: A numerical study

scientific article published on 24 February 2015

Prediction of cement damage for the Stanmore and Charnley femoral stems

Predictions of Birmingham hip resurfacing implant offset - In vitro and numerical models

scientific article published on 04 February 2019

Pseudo-dynamic analysis of a cemented hip arthroplasty using a force method based on the Newmark algorithm

scientific article published on 6 December 2014

Simulation of physiological loading in total hip replacements.

scientific article published in August 2006

Straight, semi-anatomic and anatomic TMJ implants: The influence of condylar geometry and bone fixation screws

scientific article published on 30 August 2010

Strain induced in the condyle by self-tapping screws in the Biomet alloplastic temporomandibular joint: a preliminary experimental study

scientific article published on 17 July 2015

Stress analysis of temporomandibular joint disc during maintained clenching using a viscohyperelastic finite element model.

scientific article published on 13 December 2013

Tetrahedral versus hexahedral finite elements in numerical modelling of the proximal femur.

scientific article published on 7 February 2006

The Effect of Megavoltage Radiation on Polymeric Materials to be Used in Biomedical Devices

scientific article published on 01 August 2012

The Influence of Screw Positions of Bone Fixation Screws on a TMJ Implant

The importance of femur/acetabulum cartilage in the biomechanics of the intact hip: experimental and numerical assessment

scientific article published on 21 November 2013

The importance of the geometry of the screws in TMJ implant fixation

scientific article published on 01 January 2013

The influence of acetabular bone cracks in the press-fit hip replacement: Numerical and experimental analysis.

scientific article

The influence of condylar geometry and positions of bone fixation screws on a TMJ implant

article published in 2010

The influence of data shape acquisition process and geometric accuracy of the mandible for numerical simulation.

scientific article

The influence of finishing milling strategies on texture, roughness and dimensional deviations on the machining of complex surfaces

article published in 2003

The stock alloplastic temporomandibular joint implant can influence the behavior of the opposite native joint: A numerical study.

scientific article published on 8 July 2015

Theoretical assessment of an intramedullary condylar component versus screw fixation for the condylar component of a hemiarthroplasty alloplastic TMJ replacement system.

scientific article published on 17 May 2013

List of works by António Ramos

A Device to Control Implant and Bone-Cement Temperatures in Cemented Arthroplasty

A fiber optic buckle transducer for measurement of in vitro tendon strain

A new condyle implant design concept for an alloplastic temporomandibular joint in bone resorption cases

A new press-fit stem concept to reduce the risk of end-of-stem pain at revision TKA: A pre-clinical study

A systematic approach for an accuracy level using rapid prototyping technologies

Acoustic field modeling for physiotherapy ultrasound applicators by using approximated functions of measured non-uniform radiation distributions ⬇️

Altering the Course of Technologies to Monitor Loosening States of Endoprosthetic Implants

An ex vivo experimental study of strain and stiffness of different cadaveric mandible condyle sizes

Biomechanical Analysis Comparing Natural and Alloplastic Temporomandibular Joint Replacement Using a Finite Element Model

Biomechanical analysis of total elbow replacement with unlinked iBP prosthesis: An in vitro and finite element analysis

Biomechanical evaluation of different reconstructive techniques of proximal tibia in revision total knee arthroplasty: An in-vitro and finite element analysis.

Biomechanical evaluation of proximal tibia behaviour with the use of femoral stems in revision TKA: An in vitro and finite element analysis

CAD‐CAM‐RTV – lost‐wax casting technology for medical implants

Christensen vs Biomet Microfixation alloplastic TMJ implant: Are there improvements? A numerical study.

Combined Bone-Implant Fixation: A Pre-Clinical Hip Stem Evaluation

Comparative assessment of different reconstructive techniques of distal femur in revision total knee arthroplasty

Comparison of load transfers in TMJ replacement using a standard and a custom-made temporal component.

Compression, shear and bending on tissue-engineered cartilage: a numerical study.

Effect of Occlusal Splints on the Stress Distribution on the Temporomandibular Joint Disc

Evaluation of a primary TMJ implant fixation using screws: a numerical study

Experimental and numerical predictions of Biomet(®) alloplastic implant in a cadaveric mandibular ramus.

Experimental and numerical study of the biomechanics of a human joint

Failure analysis of C-5 after total disc replacement with ProDisc-C at 1 and 2 levels and in combination with a fusion cage: finite-element and biomechanical models

Fibre Bragg grating sensing and finite element analysis of the biomechanics of the mandible

Finite element analysis to predict short and medium-term performance of the anatomical Comprehensive® Total Shoulder System

Finite element modelling and experimental validation of a total implanted shoulder joint

How can the orientation of CT scanning undermine the biomechanical performance of the intact mandible? A finite element study

Improved stability with intramedullary stem after anterior femoral notching in total knee arthroplasty

Influence of the scaffold geometry on the spatial and temporal evolution of the mechanical properties of tissue-engineered cartilage: insights from a mathematical model

Influences of geometrical and mechanical properties of bone tissues in mandible behaviour - experimental and numerical predictions.

Influences of implant condyle geometry on bone and screw strains in a temporomandibular implant.

Instrumented hip implants: electric supply systems

Instrumented hip joint replacements, femoral replacements and femoral fracture stabilizers

Load transfer in Christensen(®) TMJ in alloplastic total joint replacement for two different mouth apertures

MULTI-SOURCE ENERGY HARVESTING POWER GENERATORS FOR INSTRUMENTED IMPLANTS - Towards the Development of a Smart Hip Prosthesis

Multi-source Harvesting Systems for Electric Energy Generation on Smart Hip Prostheses

New cosurface capacitive stimulators for the development of active osseointegrative implantable devices

Percutaneous vertebroplasty: a new animal model

Prediction at long-term condyle screw fixation of temporomandibular joint implant: A numerical study

Prediction of cement damage for the Stanmore and Charnley femoral stems

Predictions of Birmingham hip resurfacing implant offset - In vitro and numerical models

Pseudo-dynamic analysis of a cemented hip arthroplasty using a force method based on the Newmark algorithm

Simulation of physiological loading in total hip replacements.

Straight, semi-anatomic and anatomic TMJ implants: The influence of condylar geometry and bone fixation screws

Strain induced in the condyle by self-tapping screws in the Biomet alloplastic temporomandibular joint: a preliminary experimental study

Stress analysis of temporomandibular joint disc during maintained clenching using a viscohyperelastic finite element model.

Tetrahedral versus hexahedral finite elements in numerical modelling of the proximal femur.

The Effect of Megavoltage Radiation on Polymeric Materials to be Used in Biomedical Devices

The Influence of Screw Positions of Bone Fixation Screws on a TMJ Implant

The importance of femur/acetabulum cartilage in the biomechanics of the intact hip: experimental and numerical assessment

The importance of the geometry of the screws in TMJ implant fixation

The influence of acetabular bone cracks in the press-fit hip replacement: Numerical and experimental analysis.

The influence of condylar geometry and positions of bone fixation screws on a TMJ implant

The influence of data shape acquisition process and geometric accuracy of the mandible for numerical simulation.

The influence of finishing milling strategies on texture, roughness and dimensional deviations on the machining of complex surfaces

The stock alloplastic temporomandibular joint implant can influence the behavior of the opposite native joint: A numerical study.

Theoretical assessment of an intramedullary condylar component versus screw fixation for the condylar component of a hemiarthroplasty alloplastic TMJ replacement system.

Vacuum casting with room temperature vulcanising rubber and aluminium moulds for rapid manufacturing of quality parts: a comparative study