List of works - Tomasz Czujko

A comparative study of electrochemical barrier layer thinning for anodic aluminum oxide grown on technical purity aluminum

scholarly article by Wojciech J. Stępniowski et al published March 2015 in Journal of Electroanalytical Chemistry

Anodization of FeAl intermetallic alloys for bandgap tunable nanoporous mixed aluminum-iron oxide

scholarly article by Wojciech J. Stępniowski et al published June 2016 in Journal of Electroanalytical Chemistry

Characterization of Low-Symmetry Structures from Phase Equilibrium of Fe-Al System-Microstructures and Mechanical Properties

scientific article published on 04 March 2015

Fabrication and geometric characterization of highly-ordered hexagonally arranged arrays of nanoporous anodic alumina

Fabrication of copper nanowires via electrodeposition in anodic aluminum oxide templates formed by combined hard anodizing and electrochemical barrier layer thinning

scholarly article by Wojciech J. Stepniowski et al published January 2018 in Journal of Electroanalytical Chemistry

Fast Fourier transform based arrangement analysis of poorly organized alumina nanopores formed via self-organized anodization in chromic acid

Feasibility study of the direct mechano-chemical synthesis of nanostructured magnesium tetrahydroaluminate (alanate) [Mg(AlH4)2] complex hydride ⬇️

scientific article published on August 26, 2005

Formation of Nanoporous Mixed Aluminum-Iron Oxides by Self-Organized Anodizing of FeAl3 Intermetallic Alloy

scientific article published on 18 July 2019

Formation of nanoporous oxide by self-organized anodizing of FeAl intermetallic alloy in oxalic acid solution containing glycol

Identification of Mechanical Properties for Titanium Alloy Ti-6Al-4V Produced Using LENS Technology

scientific article published on 16 March 2019

Microstructure and Properties of Inconel 625 Fabricated Using Two Types of Laser Metal Deposition Methods

scientific article published on 09 November 2020

Nanoporous Anodic Aluminum-Iron Oxide with a Tunable Band Gap Formed on the FeAl3 Intermetallic Phase

scientific article published on 06 August 2020

Quantitative fast Fourier transform based arrangement analysis of porous anodic oxide formed by self-organized anodization of FeAl intermetallic alloy

Severe Plastic Deformation of Fe-22Al-5Cr Alloy by Cross-Channel Extrusion with Back Pressure

scientific article published on 08 November 2018

Static and Dynamic Loading Behavior of Ti6Al4V Honeycomb Structures Manufactured by Laser Engineered Net Shaping (LENSTM) Technology.

scientific article published on 15 April 2019

Superelastic Behavior of Ti-Nb Alloys Obtained by the Laser Engineered Net Shaping (LENS) Technique

scientific article published on 23 June 2020

The Application of Globular Water-Atomized Iron Powders for Additive Manufacturing by a LENS Technique.

scientific article published on 18 May 2018

The Characterization of Stress Corrosion Cracking in the AE44 Magnesium Casting Alloy Using Quantitative Fractography Methods

scientific article published on 09 December 2019

The Effect of the Traverse Feed Rate on the Microstructure and Mechanical Properties of Laser Deposited Fe₃Al (Zr,B) Intermetallic Alloy.

scientific article published on 14 May 2018

The Microstructure Evolution of a Fe₃Al Alloy during the LENS Process.

scientific article published on 7 March 2018

The Tribaloy T-800 Coatings Deposited by Laser Engineered Net Shaping (LENSTM)

scientific article published on 26 April 2019

List of works by Tomasz Czujko