Search filters

List of works by Peter Uggowitzer

Age-hardening of high pressure die casting AlMg alloys with Zn and combined Zn and Cu additions

scientific article

Age-hardening response of AlMgZn alloys with Cu and Ag additions

scientific article

Ageing Behaviour of Al-Mg-Si Alloys After Cryogenic and Room Temperature Deformation

scientific article published on 23 January 2020

Alloy compositions and mechanical properties of 9–12% chromium steels with martensitic–austenitic microstructure

scientific article published in November 1999

Aluminium carbide formation in interpenetrating graphite/aluminium composites

scientific article

Analytical Characterization of the Corrosion Mechanisms of WC-Co by Electrochemical Methods and Inductively-Coupled Plasma Mass Spectroscopy

Assessing the degradation performance of ultrahigh-purity magnesium in vitro and in vivo

scientific article

Atom Probe Tomography Investigations of Modified Early Stage Clustering in Si-Containing Aluminum Alloys

scientific article

Atom Probe Tomography Study of As-Quenched Al-Mg-Si Alloys

scientific article

Atomic-scale characterization of prior austenite grain boundaries in Fe–Mn-based maraging steel using site-specific atom probe tomography

scientific article

Biodegradable Fe-based alloys for use in osteosynthesis: outcome of an in vivo study after 52 weeks.

scientific article published on 13 April 2014

Biodegradable wound-closing devices for gastrointestinal interventions: Degradation performance of the magnesium tip

scientific article

Brittle fracture in austenitic steel

scientific article published in July 1994

Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys

scientific article published in March 2009

Calculated phase diagrams, iron tolerance limits, and corrosion of Mg-Al alloys

scientific article published in December 2008

Cellular reactions to biodegradable magnesium alloys on human growth plate chondrocytes and osteoblasts

scientific article

Characterization of Fe-C/N Steel

scientific article published on 22 October 1999

Characterization of bulk metallic glasses via fast differential scanning calorimetry

scientific article

Clustering in Age-Hardenable Aluminum Alloys

scientific article

Configuration at the 2-position of oxazolidines derived from l-ephedrine and p-bromobenzaldehyde. An x-ray structure redetermination

scientific article published in August 1983

Correlation between Supersaturation of Solid Solution and Mechanical Behaviour of Two Binary Al-Si-Alloys

scientific article

Corrosion and stress corrosion cracking of ultra-high-purity Mg5Zn

scientific article published in April 2015

Corrosion behaviour of an Mg–Y–RE alloy used in biomedical applications studied by electrochemical techniques

scientific article published on 8 August 2008

Corrosion of AZ91 - Influence of the β-Phase Morphology

scientific article published in April 2009

Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2

scientific article published in October 2013

Corrosion properties of glassy Mg70Al15Ga15 in 0.1M NaCl solution

scientific article

Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method

Corrosion resistance of super duplex stainless steels in chloride ion containing environments: investigations by means of a new microelectrochemical method

scientific article published in April 2001

Cytotoxicity of Zr-based bulk metallic glasses

scientific article

Degradation of Cu nanowires in a low-reactive plasma environment

scientific article

Degradation performance of biodegradable Fe-Mn-C(-Pd) alloys.

scientific article

Design Strategy for Microalloyed Ultra-Ductile Magnesium Alloys for Medical Applications

scientific article published in April 2009

Design considerations for achieving simultaneously high-strength and highly ductile magnesium alloys

scientific article published in September 2012

Design strategy for biodegradable Fe-based alloys for medical applications.

scientific article published on 3 August 2009

Design strategy for controlled natural aging in Al–Mg–Si alloys

scientific article

Design strategy for microalloyed ultra-ductile magnesium alloys

scientific article

Design strategy for new biodegradable Mg–Y–Zn alloys for medical applications

scientific article published in August 2009

Differential Scanning Calorimetry and Thermodynamic Predictions—A Comparative Study of Al-Zn-Mg-Cu Alloys

scientific article

Diffusion on demand to control precipitation aging: application to Al-Mg-Si alloys

scientific article published on 06 June 2014

Effect of Compositional and Processing Variations in New 5182-Type AlMgMn Alloys on Mechanical Properties and Deformation Surface Quality

scientific article published on 20 May 2019

Effect of Interrupted Quenching on Al–Zn–Mg–Cu Alloys

scientific article

Effect of Thermal Treatments on Sn-Alloyed Al-Mg-Si Alloys

scientific article published on 03 June 2019

Effect of main alloying elements on strength of Al–Si foundry alloys at elevated temperatures

scientific article published in August 2012

Effect of recrystallisation and grain size on the mechanical properties of spray formed AlCuMgAg-alloys

scientific article published in June 1998

Effects of wear on static and dynamic failure loads of aluminium-based alloy climbing karabiners

scientific article published on 13 November 2008

Electrochemically Controlled Corrosion Initiation and Propagation in AlMgSi alloys In-situ Monitored Using X-ray Microtomography

scientific article published on 21 April 2008

Elektrochemische Korrosionsuntersuchungen an der Magnesiumlegierung AZ91: Beschreibung kritischer Parameter und deren Einfluss auf die Angriffsmechanismen auf NRC‐Proben

scientific article published in January 2004

Enhanced aging kinetics in Al-Mg-Si alloys by up-quenching

scientific article

Evolution of Microstructure and Texture in Laboratory- and Industrial-Scaled Production of Automotive Al-Sheets

scientific article published on 19 January 2020

Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment

scientific article published on 02 August 2019

Experimental investigation and thermodynamic assessment of the Cu–Sn–Ti ternary system

scientific article

Experimental investigation of the Cu–Ti–Zr system at 800°C

scientific article

Fine-grained aluminium crossover alloy for high-temperature sheet forming

scientific article published in July 2023

Formation of Die Soldering and the Influence of Alloying Elements on the Intermetallic Interface

scientific article published on 24 March 2021

Giant hardening response in AlMgZn(Cu) alloys

scientific article published in March 2021

Hardening of Al–Mg–Si alloys: Effect of trace elements and prolonged natural aging

scientific article

Hardening of Nitrogen Alloyed Steels by Shock Waves

scientific article published in August 1997

High Fe content in Al-Mg-Si wrought alloys facilitates excellent mechanical properties

scientific article published in July 2022

High Nitrogen Steels. Nickel Free High Nitrogen Austenitic Steels

scientific article published in 1996

High Nitrogen Steels. Precipitation Behaviour and Stability of Nitrides in High Nitrogen Martensitic 9% and 12% Chromium Steels

scientific article published in 1996

High aspect ratio micro mechanical structures made of bulk metallic glass

scientific article published in July 2004

High toughness and high strength spray-deposited AlCuMgAg-base alloys for use at moderately elevated temperatures

scientific article published in February 1995

High-Strength Low-Alloy (HSLA) Mg–Zn–Ca Alloys with Excellent Biodegradation Performance

scientific article

High-strength magnesium alloys for degradable implant applications

scientific article published in January 2011

ICP-MS, SKPFM, XPS, and Microcapillary Investigation of the Local Corrosion Mechanisms of WC–Co Hardmetal

Immunological Response to Biodegradable Magnesium Implants

scientific article

Improved boron-containing 9 to 12% chromium steel with high creep rupture strength

scientific article published in September 1986

In Situ Microtomographically Monitored and Electrochemically Controlled Corrosion Initiation and Propagation in AlMgSi Alloy AA6016

scientific article published in 2009

In Vivo Performance and Structural Relaxation of Biodegradable Bone Implants Made from MgZnCa Bulk Metallic Glasses

scientific article

In situ monitoring of corrosion processes within the bulk of AlMgSi alloys using X-ray microtomography

article

In situ transmission electron microscopy as a toolbox for the emerging science of nanometallurgy

scientific article published in 2023

In vivo degradation performance of micro-arc-oxidized magnesium implants: a micro-CT study in rats.

scientific article published on 25 September 2012

In-situ probing of metallic glass formation and crystallization upon heating and cooling via fast differential scanning calorimetry

scientific article

In-vitro characterization of stress corrosion cracking of aluminium-free magnesium alloys for temporary bio-implant applications

scientific article published on 18 June 2014

Influence of Chemical Composition and Process Parameters on Mechanical Properties and Formability of AlMgSi-Sheets for Automotive Application

scientific article

Influence of Composition and Roughness on Localized Corrosion of Al-Mg-Si Alloys Characterized by Microelectrochemistry

scientific article published in July 2006

Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys-Part I: Evolution of Primary and Secondary Phases

scientific article

Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part II: Evolution of Grain Size and Texture

scientific article

Influence of Temperature on Natural Aging Kinetics of AA6061 Modified with Sn

scientific article

Influence of Zn and Sn on the Precipitation Behavior of New Al-Mg-Si Alloys

scientific article published on 10 August 2019

Influence of annealing temperature on the microstructure and mechanical properties of a high nitrogen containing austenitic stainless steel

scientific article published in April 1987

Influence of compositional variations on microstructural evolution, mechanical properties and fluidity of secondary foundry alloy AlSi9Cu3

scientific article published in December 2010

Influence of decomposition on the thermal stability of undercooled Zr-Ti-Cu-Ni-Al alloys

scientific article

Influence of interrupted quenching on artificial aging of Al–Mg–Si alloys

scientific article

Influence of starting temperature on differential scanning calorimetry measurements of an Al–Mg–Si alloy

scientific article

Influence of the Chemical Composition on the Ductility of an AlSiCuZnFe Recycling Foundry Alloy

scientific article published in February 2014

Influence of the thermal route on the peak-aged microstructures in an Al–Mg–Si aluminum alloy

scientific article

Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys.

scientific article published on 15 May 2015

Influence of variations in alloy composition on castability and process stability. Part 1: Gravity and pressure casting processes

scientific article published in October 2005

Influence of yttrium additions on the hot tearing susceptibility of magnesium–zinc alloys

scientific article published in October 2010

Interdependent effect of chemical composition and thermal history on artificial aging of AA6061

scientific article

Interface Reactions of Al and Binary Al-Alloys on Mild Steel Substrates in Controlled Atmosphere

scientific article published in July 2006

Interface formation between liquid and solid Mg alloys—An approach to continuously metallurgic joining of magnesium parts

scientific article

Interface formation in aluminium–aluminium compound casting

scientific article published in August 2008

Investigation of the exfoliation-like attack mechanism in relation to Al–Mg–Si alloy microstructure

scientific article published in July 2008

Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles

scientific article published in January 2016

Lean Wrought Magnesium Alloys

scientific article

Light metal compound casting

scientific article published in January 2009

Local creep in SnAg3.8Cu0.7 lead-free solder

scientific article published in September 2005

Long-term in vivo degradation behavior and near-implant distribution of resorbed elements for magnesium alloys WZ21 and ZX50.

scientific article

Magnesium alloys for temporary implants in osteosynthesis: in vivo studies of their degradation and interaction with bone

scientific article published on 11 November 2011

Magnetic properties of Cr-Mn austenitic stainless steels

scientific article published in April 1992

Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

Martensitic–austenitic 9–12% Cr steels—Alloy design, microstructural stability and mechanical properties

scientific article published in March 2008

Measurement of specific heat capacity via fast scanning calorimetry—Accuracy and loss corrections

scientific article

Mechanical Properties and Casting Characteristics of the Secondary Aluminum Alloy AlSi9Cu3(Fe) (A226)

scientific article published on 28 February 2011

Mechanical and Thermophysical Properties of Graphite/Al Composites Produced by Casting Infiltration Methods

scientific article published on 30 July 2002

Mechanical anisotropy of extruded Mg–6% Al–1% Zn alloy

scientific article published in August 2004

Mechanism of low temperature deformation in aluminium alloys

scientific article

Mechanisms controlling the artificial aging of Al–Mg–Si Alloys

scientific article

Metallographic Etching of Al–Mg–Zn–(Cu) Crossover Alloys

scientific article published on 9 May 2024

Metallurgical Aspects of SSM Processing

scientific article published on 18 February 2009

Metallurgical Aspects of Thixoforming of AlMgSi - Wrought Alloys

scientific article published on 9 May 2000

Mg-Alloys for Forging Applications-A Review

scientific article published on 22 February 2020

MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants

scientific article published on 27 September 2009

Microstructural Change during the Interrupted Quenching of the AlZnMg(Cu) Alloy AA7050

scientific article published on 04 June 2020

Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting

scientific article published in March 2016

Microstructure Control and Structure Analysis in the Semi-Solid State of Different Feedstock Materials for the Bearing Steel 100Cr6

scientific article published on 15 October 2006

Microstructure and mechanical properties of microalloyed and equal channel angular extruded Mg alloys

scientific article published in July 2008

Microstructure and mechanical properties of squeeze cast and semi-solid cast Mg–Al alloys

scientific article published in November 2002

Microstructure evolution during reheating of an extruded Mg–Al–Zn alloy into the semisolid state

scientific article published in September 2004

Microstructures and yield strength of nitrogen alloyed super duplex steels

scientific article published in April 1997

Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

scientific article published on 16 June 2022

Monotropic polymorphism in a glass-forming metallic alloy

scientific article published on 26 April 2018

Nickel-Free High Nitrogen Austenitic Stainless Steels Produced by Metal Injection Moulding

scientific article published on 22 October 1999

Nickel-free duplex stainless steels

scientific article published in December 1998

Nitrogen Alloyed 9-12% Chromium Steels with a Mertensitic-Austenitic Microstructure

scientific article published on 22 October 1999

On material immanent ratchetting of two-phase materials under cyclic purely thermal loading

scientific article published on 22 November 1999

On the Immersion Testing of Degradable Implant Materials in Simulated Body Fluid: Active pH Regulation Using CO2

scientific article

On the biodegradation performance of an Mg-Y-RE alloy with various surface conditions in simulated body fluid

scientific article published on 14 August 2008

On the cytocompatibility of biodegradable Fe-based alloys.

scientific article published on 10 November 2012

On the effect of nitrogen on the dislocation structure of austenitic stainless steel

scientific article published in May 1993

On the in vitro and in vivo degradation performance and biological response of new biodegradable Mg-Y-Zn alloys

scientific article published on 06 October 2009

On the microstructure and properties of 100Cr6 steel processed in the semi-solid state

scientific article published in November 2007

On the microstructure formation in chromium steels rapidly cooled from the semi-solid state

scientific article published in February 2007

On the silicon spheroidization in Al–Si alloys

scientific article published in November 2002

PHB, crystalline and amorphous magnesium alloys: promising candidates for bioresorbable osteosynthesis implants?

scientific article published on 26 April 2012

Parallel nano-assembling of a multifunctional GO/HapNP coating on ultrahigh-purity magnesium for biodegradable implants

scholarly article by C. Santos et al published August 2015 in Applied Surface Science

Partitioning of chromium and molybdenum in super duplex stainless steels with respect to nitrogen and nickel content

scientific article published in February 1998

Physical properties of graphite/aluminium composites produced by gas pressure infiltration method

scientific article published in 2003

Precipitation hardening of biodegradable Fe–Mn–Pd alloys

scientific article

Precipitation in lean Mg–Zn–Ca alloys

scientific article published in October 2022

Precipitation strengthening of Nb-stabilized TP347 austenitic steel by a dispersion of secondary Nb(C,N) formed upon a short-term hardening heat treatment

scientific article published in October 2015

Preparation of high aspect ratio surface microstructures out of a Zr-based bulk metallic glass

scientific article published in June 2003

Process-controlled suppression of natural aging in an Al–Mg–Si alloy

scientific article

Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys

scientific article published in September 2023

Processing and microstructure–property relations of high-strength low-alloy (HSLA) Mg–Zn–Ca alloys

scientific article

Processing-controlled suppression of Lüders elongation in AlMgMn alloys

scientific article

Production of High Purity Magnesium Alloys by Melt Purification with Zr

scientific article published on 17 April 2012

Production of High Purity Mg-X Rare Earth Binary Alloys Using Zr

scientific article published in July 2013

Properties of Cold Worked High Nitrogen Chromium-Based Alloys

scientific article published on 22 October 1999

Property Criteria for Automotive Al-Mg-Si Sheet Alloys.

scientific article published on 4 July 2014

Prototypic Lightweight Alloy Design for Stellar-Radiation Environments

scientific article published on 30 September 2020

Rational design of a lean magnesium-based alloy with high age-hardening response

scientific article

Recrystallization behavior, microstructure evolution and mechanical properties of biodegradable Fe–Mn–C(–Pd) TWIP alloys

scientific article

Reprint of: Characterization of bulk metallic glasses via fast differential scanning calorimetry

scientific article

Reverse α′→γ transformation mechanisms of martensitic Fe–Mn and age-hardenable Fe–Mn–Pd alloys upon fast and slow continuous heating

scientific article

Room temperature recovery of cryogenically deformed aluminium alloys

scientific article

SIMS Investigations on the Distribution of Trace Elements in Modified Aluminium-Silicon-Magnesium Alloys

scientific article published in January 2003

Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility

scientific article

Selective interfacial bonding in Al(Si)–diamond composites and its effect on thermal conductivity

scientific article published in December 2006

Semi‐Solid Metal Processing of Aluminum Alloy A356 and Magnesium Alloy AZ91: Comparison Based on Metallurgical Consideration

scientific article published on 8 September 2003

Severe plastic deformation close to the melting point enables Mg-Fe nanocomposites with exceptional strength

scientific article published in June 2023

Silicon Spheroidization Treatment of Thixoformed Al-Si-Mg Alloys

scientific article published on 30 July 2002

Size-dependent diffusion controls natural aging in aluminium alloys

scientific article published on 18 October 2019

Solid-solid phase transitions via melting in metals.

scientific article

Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys

scientific article

Strain-induced clustering in Al alloys

scientific article published in December 2023

Strength and fracture toughness of interpenetrating graphite/aluminium composites produced by the indirect squeeze casting process

scientific article published in November 2004

Stress corrosion cracking and corrosion fatigue characterisation of MgZn1Ca0.3 (ZX10) in a simulated physiological environment.

scientific article published on 28 September 2016

Structural and chemical characterization of the hardening phase in biodegradable Fe–Mn–Pd maraging steels

scientific article

Structure, mechanical properties, and stress corrosion behaviour of high strength spray deposited 7000 series aluminium alloy

scientific article published in May 1991

Struktur und Eigenschaften einer hochfesten sprühkompaktierten Aluminiumlegierung

scientific article published in December 1990

Synergistic alloy design concept for new high-strength Al–Mg–Si thick plate alloys

scientific article published in March 2021

Tensile properties of glassy MgZnCa wires and reliability analysis using Weibull statistics

scientific article

The Effect of Ni on the High-Temperature Strength of Al-Si Cast Alloys

scientific article published in June 2011

The Influence of Heat Treatment and Plastic Deformation on the Bio-Degradation of a Mg–Y–RE Alloy

scientific article published in April 2009

The Influence of Solution Treatment on the High‐Temperàture Strength of Al‐Si Foundry Alloys with Ni

scientific article published on 17 March 2012

The Role of Co-Clusters in the Artificial Aging of AA6061 and AA6060

scientific article

The Role of Co-Clusters in the Artificial Aging of AA6061 and AA6060

The Role of Vacancies in the Aging of Al-Mg-Si Alloys

scientific article

The effect of crack branching on the residual lifetime of machine components containing stress corrosion cracks

scientific article published in January 1985

The effect of main alloying elements on the physical properties of Al–Si foundry alloys

scientific article published in January 2013

The fracture toughness behaviour of a 18 Ni (300 grade) maraging steel in various solution treated and aged conditions

scientific article published in April 1984

The in vivo and in vitro corrosion of high-purity magnesium and magnesium alloys WZ21 and AZ91

scientific article published in October 2013

The influence of MgSi particle reactivity and dissolution processes on corrosion in Al–Mg–Si alloys

scientific article published in December 2008

The influence of biodegradable magnesium implants on the growth plate

scientific article published on 23 November 2017

The influence of heat treatment and plastic deformation on the bio-degradation of a Mg-Y-RE alloy

scientific article published in February 2010

The influence of two common sterilization techniques on the corrosion of Mg and its alloys for biomedical applications

scientific article published on 23 September 2017

The influence of yttrium (Y) on the corrosion of Mg–Y binary alloys

scientific article published in November 2010

The role of zinc in the biocorrosion behavior of resorbable Mg‒Zn‒Ca alloys

scientific article published on 17 September 2019

The tensile fracture of ferritic-martensitic carbon steels

scientific article published in September 1982

Thermodynamic Assessment of the Sn–Ti System

scientific article

Thermodynamics of Pd–Mn phases and extension to the Fe–Mn–Pd system

scientific article

Ultrafast artificial aging of Al–Mg–Si alloys

scientific article

Using Scrap in Recycling Alloys for Structural Applications in the Automotive Industry

scientific article published in February 2014

Wear–corrosion behavior of biocompatible austenitic stainless steels

scientific article published in April 2000

ZrN, ZrxAlyN and ZrxGayN thin films – novel materials for hard coatings grown using pulsed laser deposition

scientific article published in October 2001

[O16] Thermodynamics of the Pd-Mn system and phase stability of L10-based Pd1-xMn1-yFex+y

scientific article published on 01 December 2015

Paulina is supported by:

About Paulina

Help