List of works - Véronique Michaud

3D spacers enhance flow kinetics in resin transfer molding with woven fabrics

scientific article published in April 2019

A Review of Non-saturated Resin Flow in Liquid Composite Moulding processes

scientific article published on 23 January 2016

A numerical approach to characterize the viscoelastic behaviour of fibre beds and to evaluate the influence of strain deviations on viscoelastic parameter extraction

scientific article published in April 2021

A toolbox of oligopeptide-modified polymers for tailored elastomers

scientific article published on 08 September 2014

Adhesion and interfacial healing between supramolecular hybrid networks and glass substrates

scientific article published in March 2017

All natural cork composites with suberin-based polyester and lignocellulosic residue

scholarly article in Industrial Crops and Products, vol. 109, December 2017

An experimental–numerical investigation of hydrothermal response in adhesively bonded composite structures

scientific article published in June 2015

Assessing the life cycle costs and environmental performance of lightweight materials in automobile applications

scientific article published in November 2011

Assessment of capillary phenomena in liquid composite molding

scientific article published in May 2019

Assessment of solvent capsule-based healing for woven E-glass fibre-reinforced polymers

scientific article published on 5 December 2014

Carbon fibre reinforced composite waste: An environmental assessment of recycling, energy recovery and landfilling

scientific article published in June 2013

Carbon outclasses wood in racket paddles: Ratings of expert and intermediate tennis players.

scientific article published in November 2010

Colombian Sustainability Perspective on Fused Deposition Modeling Technology: Opportunity to Develop Recycled and Biobased 3D Printing Filaments

scientific article published in 2023

Correlation between sizing formulation and compressive behavior of concentrated glass bundle suspensions

Corrigendum to: “On measuring wettability in infiltration processing” [Scripta Materialia 56 (2007) 859–862]

scientific article published in September 2012

Damage recovery after impact in E-glass reinforced poly(ε-caprolactone)/epoxy blends

Design of Self-Healing Supramolecular Rubbers with a Tunable Number of Chemical Cross-Links

scientific article published on 26 June 2015

Dynamic Properties of Materials for Alpine Skis

Dynamic saturation curve measurement for resin flow in glass fibre reinforcement

scientific article published in March 2012

Economic and environmental assessment of alternative production methods for composite aircraft components

scientific article published in July 2012

Effect of aging on the performance of solvent-based self-healing materials

scientific article published in 2013

Effect of annealing and silylation on the strength of melt-spun Ni–Mn–Ga fibres and their adhesion to epoxy

scientific article published in December 2014

Effect of interfacial interactions on the electromechanical response of poly(vinylidene fluoride-trifluoroethylene)/BaTiO3 composites and its time dependence after poling

scientific article published in June 2015

Effect of mechanical damage and wound healing on the viscoelastic properties of stems of flax cultivars (Linum usitatissimum L. cv. Eden and cv. Drakkar).

scientific article published on 5 October 2017

Effect of silane coupling agent on the morphology, structure, and properties of poly(vinylidene fluoride–trifluoroethylene)/BaTiO3 composites

scientific article published on 25 March 2014

Electrically conductive self-healing polymer composite coatings

scientific article published in August 2015

Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates

scientific article published in March 2018

Energy dissipation in concentrated monodisperse colloidal suspensions of silica particles in polyethylene glycol

scientific article published on 5 September 2014

Fracture Toughness Healing in Epoxy Containing Both Epoxy and Amine Loaded Capsules

scientific article published on 20 January 2014

Functionalized Fiber Reinforced Composites via Thermally Drawn Multifunctional Fiber Sensors

scientific article published on 10 February 2021

High-temperature copolyamides obtained by the efficient transamidation of crystalline-crystalline polyamide blends

scientific article published on 22 September 2016

Hybrid Glass Mat Reinforced Polypropylene-Montmorillonite Nanocomposites

scientific article published in April 2009

Improved mechanical dispersion or use of coupling agents? Advantages and disadvantages for the properties of fluoropolymer/ceramic composites

scientific article published in October 2018

In situ Strain and Temperature Monitoring of Adaptive Composite Materials

In situ simultaneous strain and temperature measurement of adaptive composite materials using a fiber Bragg grating based sensor

In-plane conduction of polymer composite plates reinforced with architectured networks of Copper fibres

scientific article published on 29 November 2011

In-plane permeability distribution mapping of isotropic mats using flow front detection

scientific article published in October 2018

In-situ repair of composite sandwich structures using cyanoacrylates

scientific article published in August 2016

Interface-Dominated Time-Dependent Behavior of Poled Poly(Vinylidene Fluoride-Trifluoroethylene)/Barium Titanate Composites

scientific article published on 04 January 2020

Internal stress control in epoxy resins and their composites by material and process tailoring

scientific article published in December 2002

Investigation of process-induced strains development by fibre Bragg grating sensors in resin transfer moulded composites

scientific article published in March 2011

Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation

Magneto-mechanical actuation of ferromagnetic shape memory alloy/epoxy composites

article published in 2015

Micro-scale modeling of water diffusion in adhesive composite joints

scientific article published in May 2014

Microstructured Fibers for the Production of Food

scientific article published on 15 February 2019

Monitoring strain gradients in adhesive composite joints by embedded fiber Bragg grating sensors

scientific article published in June 2014

Nitrogen-doped graphene stabilized copper nanoparticles for Huisgen [3+2] cycloaddition "click" chemistry

scientific article published on 01 May 2019

Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept

scientific article published in 2022

On measuring wettability in infiltration processing

scientific article published in May 2007

Passive damping of composites with embedded shape memory alloy wires

scientific article published on 25 March 2010

Permeability and capillary effects in a channel-wise non-crimp fabric

scientific article published in May 2018

Permeability of textile fabrics with spherical inclusions

scientific article published in August 2017

Pre- and post-transition behavior of shear-thickening fluids in oscillating shear

scientific article published on 20 May 2007

Predicting sizing dependent bending rigidity of glass fibre bundles in sheet moulding compounds

Process-induced strains in RTM processing of polyurethane/carbon composites

Processing and damage recovery of intrinsic self-healing glass fiber reinforced composites

scientific article published on 14 July 2016

Processing, characterisation and rheology of transparent concentrated fibre-bundle suspensions

scientific article published on 21 February 2007

Progress in Self-Healing Fiber-Reinforced Polymer Composites

scientific article published on 7 June 2018

Progress on Composites with Embedded Shape Memory Alloy Wires

scientific article published in 2002

Separation of the polymer matrix and the fibrous reinforcement during compression moulding of Glass Mat Thermoplastics (GMT)

scientific article published in April 2008

Shear thickening fluids as a tunable damping element: experimental results and modeling

scientific article published on 6 April 2007

Size limitations on achieving tough and healable fibre reinforced composites through the use of thermoplastic nanofibres

scientific article published in September 2018

Soft Self-Healing Nanocomposites

scientific article published on 18 June 2019

Special issue for flow processing in composite materials

scientific article published in May 2020

Stitched shape memory alloy wires enhance damage recovery in self-healing fibre-reinforced polymer composites

scientific article published in June 2018

Stress reduction mechanisms during photopolymerization of functionally graded polymer nanocomposite coatings

Structural damping of model sandwich structures using tailored shear thickening fluid compositions

scientific article published on 10 February 2010

Structural damping using encapsulated shear thickening fluids

scientific article published on 26 April 2012

Tailoring of the practical adhesion between polyethylene and galvanised steel

The effect of processing conditions on the morphology, thermomechanical, dielectric, and piezoelectric properties of P(VDF-TrFE)/BaTiO3 composites