Search filters

List of works by Marco Antonio Bottino

A microstrain comparison of passively fitting screw-retained and cemented titanium frameworks

scientific article published on 3 May 2014

A new silica-infiltrated Y-TZP obtained by the sol-gel method

scientific article published on 21 March 2016

A strain gauge analysis of microstrain induced by various splinting methods and acrylic resin types for implant impressions

scientific article published on March 1, 2012

Action of restorative materials on the gingival free margin

scientific article published on 01 July 1976

Adhesive Cementation Promotes Higher Fatigue Resistance to Zirconia Crowns

scientific article published on 28 November 2016

Air–particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

scientific article published on 17 May 2013

Anatomy and physiology of the temporomandibular joint

scientific article published on January 1, 1973

Auxiliary pins: retention auxiliaries in a fixed prothesis and contentions--modification of a technic

scientific article published on December 1, 1977

Bacterial Colonization in the Marginal Region of Ceramic Restorations: Effects of Different Cement Removal Methods and Polishing.

scientific article

Bond strength durability of a resin composite on a reinforced ceramic using various repair systems

scientific article published on 9 August 2009

Bond strength of different resin cement and ceramic shades bonded to dentin

scientific article published on 01 October 2013

Bond strength of two resin cements on dentin using different cementation strategies.

scientific article published in August 2010

Bond strengths, degree of conversion of the cement and molecular structure of the adhesive–dentine joint in fibre post restorations

scientific article published on 28 January 2012

Bonding of Y-TZP to dentin: effects of Y-TZP surface conditioning, resin cement type, and aging.

scientific article published on 22 October 2013

Bonding of the Polymer Polyetheretherketone (PEEK) to Human Dentin: Effect of Surface Treatments

scientific article published on October 2016

Carbon film coating of abutment surfaces: effect on the abutment screw removal torque

article published in 2014

Ceramic Inlays: Effect of Mechanical Cycling and Ceramic Type on Restoration-dentin Bond Strength

scientific article published on 01 July 2016

Ceramic primer heat-treatment effect on resin cement/Y-TZP bond strength.

scientific article published on 22 May 2012

Coating dental implant abutment screws with diamondlike carbon doped with diamond nanoparticles: the effect on maintaining torque after mechanical cycling.

scientific article published in November 2015

Color stability of ceramic laminate veneers cemented with light-polymerizing and dual-polymerizing luting agent: A split-mouth randomized clinical trial

scientific article published on 03 April 2017

Composite resin to yttria stabilized tetragonal zirconia polycrystal bonding: comparison of repair methods

scientific article published on 07 February 2012

Confocal laser microscopic analysis of biofilm on newer feldspar ceramic.

scientific article

Different Methods for Inlay Production: Effect on Internal and Marginal Adaptation, Adjustment Time, and Contact Point

scientific article published on 12 April 2017

Does the prosthesis weight matter? 3D finite element analysis of a fixed implant-supported prosthesis at different weights and implant numbers

scientific article published on 22 April 2020

Dry cotton thread impregnated with epinephrine for gingival displacement; clinical, histological and histochemical aspects

scientific article published on July 1, 1973

Durability of microtensile bond to nonetched and etched feldspar ceramic: self-adhesive resin cements vs conventional resin

scientific article published on 01 April 2011

Effect of Adhesive Cementation Strategies on the Bonding of Y-TZP to Human Dentin.

scientific article published on 28 October 2015

Effect of Jig Design and Assessment of Stress Distribution in Testing Metal-Ceramic Adhesion.

scientific article published on 5 October 2015

Effect of Thickness, Processing Technique and Cooling Rate Protocol on the μTBS of a Bilayer Ceramic System.

scientific article published on 4 August 2015

Effect of air-abrasion regimens and fine diamond bur grinding on flexural strength, Weibull modulus and phase transformation of zirconium dioxide.

scientific article published on 18 September 2015

Effect of airborne-particle abrasion and mechanico-thermal cycling on the flexural strength of glass ceramic fused to gold or cobalt-chromium alloy

scientific article published on 01 October 2011

Effect of ceramic shade on the degree of conversion of a dual-cure resin cement analyzed by FTIR

scientific article published on 20 December 2012

Effect of ceramic thickness and shade on mechanical properties of a resin luting agent

scientific article published on 05 March 2014

Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia

scientific article published on 6 November 2017

Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent

scientific article

Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions

scientific article published on 01 April 2008

Effect of finish line on marginal fit of sintered gold copings.

scientific article

Effect of glazing application side and mechanical cycling on the biaxial flexural strength and Weibull characteristics of a Y-TZP ceramic

scientific article published on 28 September 2020

Effect of grinding and heat treatment on the mechanical behavior of zirconia ceramic

scientific article published on 15 December 2015

Effect of mechanical cycling on the flexural strength of densely sintered ceramics

scientific article published on 24 April 2006

Effect of mechanical cycling on the push-out bond strength of fiber posts adhesively bonded to human root dentin.

scientific article published in November 2007

Effect of post-silanization heat treatments of silanized feldspathic ceramic on adhesion to resin cement

scientific article published on 01 October 2013

Effect of seating forces on cement-ceramic adhesion in microtensile bond tests

scientific article published on 13 January 2012

Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic.

scientific article published on October 2010

Effect of sodium ascorbate and the time lapse before cementation after internal bleaching on bond strength between dentin and ceramic.

scientific article published on 25 February 2010

Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions

scientific article published on 15 December 2006

Effect of the layering technique on bond strength and cohesive resistance of a porcelain-zirconia system

scientific article published on 01 February 2014

Effect of the surface treatment of plain carbon fiber posts on the retention of the composite core: an in vitro evaluation

scientific article published on 01 January 2001

Effects of Surface Treatments on the Bond Strength Between Resin Cement and a New Zirconia-reinforced Lithium Silicate Ceramic.

scientific article published on 11 December 2015

Effects of aging procedures on the topographic surface, structural stability, and mechanical strength of a ZrO2-based dental ceramic.

scientific article published on 22 September 2014

Effects of cement thickness and bonding on the failure loads of CAD/CAM ceramic crowns: multi-physics FEA modeling and monotonic testing.

scientific article published on 15 May 2012

Effects of thickness, processing technique, and cooling rate protocol on the flexural strength of a bilayer ceramic system

scientific article published on 17 August 2013

Effects of two grading techniques of zirconia material on the fatigue limit of full-contour 3-unit fixed dental prostheses

scientific article published on 21 January 2017

Elastic Properties of Lithium Disilicate Versus Feldspathic Inlays: Effect on the Bonding by 3D Finite Element Analysis

scientific article published on 03 October 2016

Evaluation of light transmission through translucent and opaque posts.

scientific article published on May 2008

Evaluation of resin bond strength to yttria-stabilized tetragonal zirconia and framework marginal fit: comparison of different surface conditionings.

scientific article

Evaluation of tensile retention of Y-TZP crowns after long-term aging: effect of the core substrate and crown surface conditioning

scientific article published on 08 May 2014

Evaluation of tensile retention of Y-TZP crowns cemented on resin composite cores: effect of the cement and Y-TZP surface conditioning.

scientific article published on 27 August 2014

Evaluation of the shear bond strength of the union between two CoCr-alloys and a dental ceramic ⬇️

scientific article published on December 1, 2004

Extended glaze firing improves flexural strength of a glass ceramic

scientific article published on 01 December 2015

Failure Probability of Three Designs of Zirconia Crowns

scientific article

Fatigue Resistance of Y-TZP/Porcelain Crowns is Not Influenced by the Conditioning of the Intaglio Surface.

scientific article

Fatigue behavior of Y-TZP ceramic after surface treatments

article

Fatigue failure load of zirconia-reinforced lithium silicate glass ceramic cemented to a dentin analogue: Effect of etching time and hydrofluoric acid concentration.

scientific article published on 23 September 2017

Fatigue limit of monolithic Y-TZP three-unit-fixed dental prostheses: Effect of grinding at the gingival zone of the connector

scientific article published on 07 March 2017

Finite element analysis of the influence of geometry and design of zirconia crowns on stress distribution.

scientific article published on 27 June 2014

Flexural strength of glass-infiltrated zirconia/alumina-based ceramics and feldspathic veneering porcelains

scientific article published on 08 May 2009

Fracture Strength, Failure Types, and Weibull Characteristics of Three-Unit Zirconia Fixed Dental Prostheses After Cyclic Loading: Effects of Veneering and Air-Abrasion Protocols

scientific article published on November 2016

Fracture of Zirconia Abutment with Metallic Insertion on Anterior Single Titanium Implant with Internal Hexagon: Retrieval Analysis of a Failure.

scientific article published in September 2016

Fracture resistance of bovine incisors restored with different glass fiber posts: Effect of the diameter of fiber post ⬇️

scientific article published on September 1, 2012

Gingival removal: periodontal and prosthetic considerations

scientific article published on April 1, 1978

Gingival retraction. Behavior of gingival tissue when retracted with dry cotton thread, impregnated with racemic epinephrine crystals and soaked in racemic epinephrine solution

scientific article published on July 1, 1977

Hard machining, glaze firing and hydrofluoric acid etching: Do these procedures affect the flexural strength of a leucite glass-ceramic?

scientific article published on 2 May 2015

Impact of machining on the flexural fatigue strength of glass and polycrystalline CAD/CAM ceramics.

scientific article published on 14 August 2017

Impression technique for ovate pontics

scientific article published on 01 January 2011

Improved adhesion of Y-TZP ceramics: a novel approach for surface modification

scientific article published in January 2014

Influence of Socket-shield technique on the biomechanical response of dental implant: three-dimensional finite element analysis

scientific article published on 08 January 2020

Influence of acid-etching and ceramic primers on the repair of a glass ceramic

scientific article published on March 1, 2012

Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

scientific article published on 31 October 2013

Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic

scientific article published on 01 December 2006

Influence of custom-made and stock mouthguard thickness on biomechanical response to a simulated impact

scientific article published on 21 September 2018

Influence of different restorative materials on the stress distribution in dental implants.

scientific article

Influence of insertion techniques for resin cement and mechanical cycling on the bond strength between fiber posts and root dentin.

scientific article published in April 2015

Influence of the resin cement thickness on the fatigue failure loads of CAD/CAM feldspathic crowns.

scientific article published on 21 May 2015

Influence of thermal and mechanical cycling on the flexural strength of ceramics with titanium or gold alloy frameworks.

scientific article published on 3 August 2007

Inlays made from a hybrid material: adaptation and bond strengths.

scientific article

Lithium Disilicate Crown, Zirconia Hybrid Abutment and Platform Switching to Improve the Esthetics in Anterior Region: A Case Report

scientific article published on 19 February 2020

Low-Fusing Porcelain Glaze Application on 3Y-TZP Surfaces can Enhance Zirconia-Porcelain Adhesion

scientific article published on September 2016

Low-temperature degradation of a Y-TZP ceramic after surface treatments

scientific article published on 16 September 2013

Marginal and internal discrepancies of zirconia copings: effects of milling system and finish line design

scientific article published on January 2015

Marginal fit of nickel-chromium copings before and after internal adjustments with duplicated stone dies and disclosing agent.

scientific article published in June 2000

Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics

scientific article published on 01 May 2010

Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment.

scientific article

Microstructural analysis and reliability of monolithic zirconia after simulated adjustment protocols

scientific article published on 09 June 2017

Microstructure characterization and SCG of newly engineered dental ceramics

scientific article published on 16 April 2016

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

scientific article published on 26 December 2006

Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning.

scientific article published on 21 July 2005

Morphology and bacterial colonisation of tooth/ceramic restoration interface after different cement excess removal techniques.

scientific article

Opaque layer firing temperature and aging effect on the flexural strength of ceramic fused to cobalt-chromium alloy.

scientific article published on 28 April 2010

Polyethers: a bibliographic review

scientific article published on 01 January 1976

Progressive waxing. II. Technic of Peter K. Thomas

scientific article published on April 1, 1977

Reference standard to read the air-driven calloric reflex test results

scientific article published on 01 January 2009

Reinforced Glass-ceramics: Parametric Inspection of Three-Dimensional Wear and Volumetric Loss after Chewing Simulation

scientific article published on 07 October 2019

Resin Bonding to a Hybrid Ceramic: Effects of Surface Treatments and Aging

scientific article published on 12 August 2015

Resin bonding to a feldspar ceramic after different ceramic surface conditioning methods: evaluation of contact angle, surface pH, and microtensile bond strength durability.

scientific article published in December 2011

Role of occlusion in temporomandibular joint disturbances

scientific article published on 01 January 1972

Self-etching Primers vs Acid Conditioning: Impact on Bond Strength Between Ceramics and Resin Cement

scientific article published on 7 March 2018

Shear bond strength of resin cement bonded to alumina ceramic after treatment by aluminum oxide sandblasting or silica coating

scientific article published on 31 August 2011

Silica coating followed by heat-treatment of MDP-primer for resin bond stability to yttria-stabilized zirconia polycrystals

scientific article published on 8 March 2018

Silica infiltration in partially stabilized zirconia: Effect of hydrothermal aging on mechanical properties

scientific article published on 11 April 2020

Silica-based nano-coating on zirconia surfaces using reactive magnetron sputtering: effect on chemical adhesion of resin cements

scientific article published on 01 April 2013

Strain gauge analysis of the effect of porcelain firing simulation on the prosthetic misfit of implant-supported frameworks.

scientific article

Stress distribution around osseointegrated implants with different internal-cone connections: photoelastic and finite element analysis.

scientific article published on 10 June 2013

Surface Treatments of Zirconia to Enhance Bonding Durability

scientific article published on 07 July 2015

Surface agents' influence on the flexural strength of bilaminated ceramics

scientific article published on 01 July 2013

Survival probability of zirconia-reinforced lithium silicate ceramic: Effect of surface condition and fatigue test load profile

scientific article published on 30 April 2020

Survival rate, load to fracture, and finite element analysis of incisors and canines restored with ceramic veneers having varied preparation design

scientific article published on 06 February 2014

The Impact of Conical and Nonconical Abutments on Bacterial Infiltration at the Implant-Abutment Interface.

scientific article published in November 2016

The adhesive system and root canal region do not influence the degree of conversion of dual resin cement.

scientific article

The effect of mechanical loading on the cusp defection of premolars restored with direct and indirect techniques.

scientific article

The effect of porcelain thickness and surface liner application on the fracture behavior of a ceramic system.

scientific article published on 25 June 2011

The fitness of copings constructed over UCLA abutments and the implant, constructed by different techniques: casting and casting with laser welding ⬇️

scientific article published on December 1, 2004

The influence of cutting speed and cutting initiation location in specimen preparation for the microtensile bond strength test.

scientific article

Ultrathin Monolithic Zirconia Veneers: Reality or Future? Report of a Clinical Case and One-year Follow-up

scientific article

Zirconia-Reinforced Lithium Silicate Ceramic - A 2-Year Follow-up of a Clinical Experience with Anterior Crowns.

scientific article

Paulina is supported by:

About Paulina

Help