3D Heterogeneous Stiffness Reconstruction Using MRI and the Virtual Fields Method

A Fourier-series-based Virtual Fields Method for the Identification of 2-D Stiffness and Traction Distributions

A Fourier-series-based virtual fields method for the identification of 2-D stiffness distributions

A Fourier-series-based virtual fields method for the identification of three-dimensional stiffness distributions and its application to incompressible materials

A Novel Image-Based Inertial Impact Test (IBII) for the Transverse Properties of Composites at High Strain Rates

A Novel Image-based Ultrasonic Test to Map Material Mechanical Properties at High Strain-rates

A Practical Procedure for Measuring the Stiffness of Foam like Materials

A Procedure for Producing Reflective Coatings on Plates to be Used for Full-Field Slope Measurements by a Deflectometry Technique

A comparison between the Iosipescu and off-axis shear test methods for the characterization of Pinus Pinaster Ait

A novel method for measuring the through-thickness shear moduli of anisotropic plates from surface deformation measurements

A procedure for specimen optimization applied to material testing in plasticity with the virtual fields method

Addendum to ‘Characterising the Strain and Temperature Fields in a Surrogate Bone Material Subject to Power Ultrasonic Excitation’

An Image-Based Approach for Measuring Dynamic Fracture Toughness

An Image-Based Impact Test for the High Strain Rate Tensile Properties of Brittle Materials

An Image-Based Inertial Impact (IBII) Test for Tungsten Carbide Cermets

An Image-Based Inertial Impact Test for the High Strain Rate Properties of Brittle Materials

An alternative to modal analysis for material stiffness and damping identification from vibrating plates

Anisotropy Evaluation of Paperboard With Virtual Fields Method

Application of full-field measurement techniques to composite materials and structures

Application of the Virtual Fields Method to determine dynamic properties at intermediate strain rates

Application of the virtual fields method to large strain anisotropic plasticity

Application of the virtual fields method to the identification of the homogeneous anisotropic hardening parameters for advanced high strength steels

Applying the Virtual Fields Method to the identification of elasto-plastic constitutive parameters

Assessment of Corneal Deformation Using Optical Coherence Tomography and Digital Volume Correlation

Assessment of the Deformation of Low Density Polymeric Auxetic Foams by X-Ray Tomography and Digital Volume Correlation

Assessment of the heterogeneous microstructure in the vicinity of a weld using thermographic measurements of the full‐field dissipative heat source

Assessment of the metrological performance of an in situ storage image sensor ultra-high speed camera for full-field deformation measurements

Beyond Hopkinson's bar.

scientific article published in August 2014

Case Study I: Standard and Funny Isotropic Discs

Case Study II: Unnotched Iosipescu Test

Case Study III: Orthotropic Plate in Pure Bending

Characterisation of 3D printed sand moulds using micro-focus X-ray computed tomography

Characterisation of strain localisation processes during fatigue crack initiation and early crack propagation by SEM-DIC in an advanced disc alloy

Characterisation of the bending stiffness components of MDF panels from full-field slope measurements

Characterization of dynamic hardening behavior using acceleration information

Characterization of the Dynamic Strain Hardening Behavior from Full-field Measurements

Characterization of the post-necking strain hardening behavior using the virtual fields method

Characterizing elastic properties of superconducting windings by simulations and experiments

Combined shear/tension testing of fibre composites at high strain rates using an image-based inertial impact test

CompTest 2003

CompTest 2004

CompTest 2015 – Composites testing and model identification international conference, 8–10 April 2015 in Madrid, Spain

CompTest2008

Comparison of the Mechanical Behaviour of Standard and Auxetic Foams by X-ray Computed Tomography and Digital Volume Correlation

scholarly article by Fabrice Pierron et al published 13 September 2013 in Strain

Comparison of two approaches for differentiating full-field data in solid mechanics

Complements

Composites Part A: Applied Science and Manufacturing

Correlation between Full-Field Measurements and Numerical Simulation Results for Multiple Delamination Composite Specimens in Bending

Damage detection in composite materials using deflectometry, a full-field slope measurement technique

Deformation mechanisms of idealised cermets under multi-axial loading

Depth-Resolved Full-Field Measurement of Corneal Deformation by Optical Coherence Tomography and Digital Volume Correlation

Design of New Tests for the VFM

Determination of Anisotropic Plastic Constitutive Parameters Using the Virtual Fields Method

Determination of the Dynamic Strain Hardening Parameters from Acceleration Fields

Development of a Test Simulator to Perform Optimized Experiment Design

Direct identification of the damage behaviour of composite materials using the virtual fields method

Dissipated energy measurements as a marker of microstructural evolution: 316L and DP600

Dissipative energy as an indicator of material microstructural evolution

Edge machining effects on the failure of polymer matrix composite coupons

Effect of DIC Spatial Resolution, Noise and Interpolation Error on Identification Results with the VFM

Elastic stiffness characterization using three-dimensional full-field deformation obtained with optical coherence tomography and digital volume correlation

scientific article published on December 2013

Estimation of the strain field from full-field displacement noisy data

Evaluation of Volume Deformation from Surface DIC Measurement

Experimental Energy Balance During the First Cycles of Cyclically Loaded Specimens Under the Conventional Yield Stress

Experimental identification of a nonlinear model for composites using the grid technique coupled to the virtual fields method

Exploration of Saint-Venant’s Principle in Inertial High Strain Rate Testing of Materials

Extension of the Non-linear Virtual Fields Method to Inertial Heterogeneous High Strain Rate Tests

Extension of the Optimized Virtual Fields Method to estimate viscoelastic material parameters from 3D dynamic displacement fields

scientific article

Extension of the sensitivity-based virtual fields to large deformation anisotropic plasticity

Extension of the virtual fields method to elasto-plastic material identification with cyclic loads and kinematic hardening

Fast Fourier Virtual Fields Method for Determination of Modulus Distributions from Full-Field Optical Strain Data

Fiber Composites

Full-Field Strain Imaging of Ultrasonic Waves in Solids

Full-Field Strain Measurement On Titanium Welds And Local Elasto-Plastic Identification With The Virtual Fields Method

scholarly article published 2011

Full-Field Strain Measurement and Identification of Composites Moduli at High Strain Rate with the Virtual Fields Method

Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part I: Methodology

Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part II: Experimental results

Full-field evaluation of the onset of microplasticity in a steel specimen

Full-field strain measurements at high rate on notched composites tested with a tensile Hopkinson bar

General Anisotropy Identification of Paperboard with Virtual Fields Method

General framework for the identification of constitutive parameters from full-field measurements in linear elasticity

Generalized Stress–Strain Curves for IBII Tests on Isotropic and Orthotropic Materials

Heat dissipation measurements in low stress cyclic loading of metallic materials: From internal friction to micro-plasticity

High strain rate elasto‐plasticity identification using the image‐based inertial impact (IBII) test part 1: Error quantification

High strain rate elasto‐plasticity identification using the image‐based inertial impact (IBII) test part 2: Experimental validation

High-Strain Rate Interlaminar Shear Testing of Fibre-Reinforced Composites Using an Image-Based Inertial Impact Test

IBII Test for High Strain Rate Tensile Testing of Adhesives

Identification from full-field measurements

Identification of Elasto-Plastic Constitutive Parameters from Statically Undetermined Tests Using the Virtual Fields Method

Identification of Heterogeneous Constitutive Parameters in a Welded Specimen: Uniform Stress and Virtual Fields Methods for Material Property Estimation

Identification of Material Parameters of PVC Foams using Digital Image Correlation and the Virtual Fields Method

Identification of Poisson's ratios of standard and auxetic low-density polymeric foams from full-field measurements

Identification of dynamic loading on a bending plate using the Virtual Fields Method

Identification of elasto-visco-plastic parameters and characterization of Lüders behavior using digital image correlation and the virtual fields method

Identification of low density polyurethane foam properties by DIC and the virtual fields method

Identification of material stiffness and damping in vibrating plates using full-field measurements

Identification of nonlinear kinematic hardening constitutive model parameters using the virtual fields method for advanced high strength steels

scientific article published in December 2016

Identification of plastic constitutive parameters at large deformations from three dimensional displacement fields

Identification of shear bands in wrought magnesium alloy friction stir welds and laser beam welds

Identification of stiffness and damping properties of thin isotropic vibrating plates using the virtual fields method: theory and simulations

Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains

Identification of the Dynamic Properties of Al 5456 FSW Welds Using the Virtual Fields Method

Identification of the Heterogeneous Elasto-plastic Behaviour of FSW Welds at High Strain Rates

Identification of the Local Elasto-Plastic Behavior of FSW Welds Using the Virtual Fields Method

Identification of the Mechanical Properties of Superconducting Windings Using the Virtual Fields Method

Identification of the Mechanical Properties of Superconducting Windings Using the Virtual Fields Method

Identification of the Orthotropic Elastic Stiffnesses of Composites with the Virtual Fields Method: Sensitivity Study and Experimental Validation

Identification of the YLD2000-2D Model with the Virtual Fields Method

article

Identification of the local stiffness reduction of a damaged composite plate using the virtual fields method

Identification of the mechanical behaviour of low density hyperelastic polymeric foams from full-field measurements

Identification of the through-thickness rigidities of a thick laminated composite tube

Identifying Constitutive Parameters from Heterogeneous Strain Fields using the Virtual Fields Method

Image-Based Inertial Impact (IBII) Tests for Measuring the Interlaminar Shear Moduli of Composites

Image-Based Inertial Impact Test for Composite Interlaminar Tensile Properties

Image-Based Inertial Impact Tests on an Aluminum Alloy

Image-based high strain rate testing of orthopaedic bone cement

Image-based high strain-rate testing for the characterization of viscoplasticity

Impact damage detection in composite plates using deflectometry and the Virtual Fields Method

Inertial Impact Method for the Through-Thickness Strength of Composites

Inertial Impact Tests on Polymers for Inverse Parameter Identification

Inertial Impact Tests to Identify the Plastic Properties of Metals

Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds

Infrared Deflectometry for Slope Deformation Measurements

Inverse Identification of the Elasto-Plastic Response of Metals at High Strain Rates

Inverse Identification of the High Strain Rate Properties of PMMA

Inverse Problems in Experimental Mechanics

Investigation of the 2D assumption in the image‐based inertial impact test

scientific article published in 2020

Latest Results for Elasto-Plastic Identification at High Rates Using Inertial Impact

Latest Results in Novel Inertial High Strain Rate Tests

Local Elasto-Plastic Identification of the Behaviour of Friction Stir Welds with the Virtual Fields Method

Local stiffness reduction in impacted composite plates from full-field measurements

Material Testing 2.0: A brief review

Measurement of Vibrating Plate Spatial Responses Using Deflectometry and High Speed Camera

Measuring orthotropic bending stiffness components of Pinus pinaster by the virtual fields method

Mechanical properties of low density polymeric foams obtained from full-field measurements

Méthodologie d'identification du comportement mécanique des mousses hyperélastiques par mesures de champs et méthode inverse

Novel experimental approach for longitudinal-radial stiffness characterisation of clear wood by a single test

Numerical issues in the virtual fields method

On the identifiability of Anand visco-plastic model parameters using the Virtual Fields Method

On the realization of microscopic grids for local strain measurement by direct interferometric photolithography

On the use of simulated experiments in designing tests for material characterization from full-field measurements

Optical full-field measurement of strain at a microscopic scale with the grid method

Optimised Experimental Characterisation of Polymeric Foam Material Using DIC and the Virtual Fields Method

Optimization of an Image-Based Experimental Setup for the Dynamic Behaviour Characterization of Materials

Optimized Test Design for Identification of the Variation of Elastic Stiffness Properties of Loblolly Pine (Pinus taeda) Pith to Bark

Optimized identification of earlywood and latewood stiffnesses in loblolly pine in simulated experiments

Overview of Identification Methods of Mechanical Parameters Based on Full-field Measurements

Parameter Determination of Anisotropic Yield Criterion

Performance Assessment of Inverse Methods in Large Strain Plasticity

Performances and Limitations of Three Ultra High-Speed Imaging Cameras for Full-Field Deformation Measurements

Quantification of the Compressibility of Elastomers Using DIC

Refined experimental methodology for assessing the heat dissipated in cyclically loaded materials at low stress levels

Sensitivity-based virtual fields for the non-linear virtual fields method

scientific article published on 28 April 2017

Sheet metals characterization using the virtual fields method

Smoothly varying in-plane stiffness heterogeneity evaluated under uniaxial tensile stress

Stiffness and Damping Identification from Full Field Measurements on Vibrating Plates

Strain accumulation and fatigue crack initiation at pores and carbides in a SX superalloy at room temperature

Stress Reconstruction and Constitutive Parameter Identification in Plane-Stress Elasto-plastic Problems Using Surface Measurements of Deformation Fields

Texture evolution in Nd:YAG-laser welds of AZ31 magnesium alloy hot rolled sheets and its influence on mechanical properties

The Effect of Microstructure on Energy Dissipation in 316L Stainless Steel

The Effects of Noise and Spatial Sampling on Identification of Material Parameters by Magnetic Resonance Elastography

The Virtual Fields Method

The Virtual Fields Method for Extracting Constitutive Parameters From Full-Field Measurements: a Review

The application of digital volume correlation (DVC) to study the microstructural behaviour of trabecular bone during compression

scientific article published on 5 October 2013

The virtual fields method applied to spalling tests on concrete

The virtual fields method with piecewise virtual fields

Time-resolved full-field imaging of ultrasonic Lamb waves using deflectometry

Towards Material Testing 2.0. A review of test design for identification of constitutive parameters from full‐field measurements

Towards the design of a new standard for composite stiffness identification

Ultra High Speed DIC and Virtual Fields Method Analysis of a Three Point Bending Impact Test on an Aluminium Bar

Ultra-High-Speed Full-Field Deformation Measurements on Concrete Spalling Specimens and Stiffness Identification with the Virtual Fields Method

Ultrasonic Test for High Rate Material Property Imaging

Uncertainty Quantification in VFM Identification

Use of VFM for Heterogeneity Evaluation of Materials Under Uniaxial Tensile Stress

Usinabilité à grande vitesse et à sec des couches du rechargement base-nickel par soudage d'outillage à chaud

Validation of finite‐element models using full‐field experimental data: Levelling finite‐element analysis data through a digital image correlation engine

Variation of transverse and shear stiffness properties of wood in a tree

Virtual Fields Method, The

Viscoelastic Properties Identification Through Innovative Image-Based DMTA Strategy

Viscoelastic material properties' identification using full field measurements on vibrating plates

Viscoelastic material properties’ identification using high speed full field measurements on vibrating plates