List of works - Markus Windolf

A biomechanical comparison of fixed angle locking compression plate osteosynthesis and cement augmented screw osteosynthesis in the management of intra articular calcaneal fractures

scientific article

A biomechanical study on proximal plate fixation techniques in periprosthetic femur fractures.

scientific article published on 29 October 2013

A cadaveric biomechanical study comparing the ease of femoral nail insertion: 1.0- vs 1.5-m bow designs

scientific article published on 3 April 2017

A comparison of parallel and diverging screw angles in the stability of locked plate constructs

Adjacent vertebral failure after vertebroplasty: a biomechanical study of low-modulus PMMA cement.

scientific article

Analysis of sacro-iliac joint screw fixation: does quality of reduction and screw orientation influence joint stability? A biomechanical study.

scientific article published on 5 October 2015

Angular stability potentially permits fewer locking screws compared with conventional locking in intramedullary nailed distal tibia fractures: a biomechanical study

scientific article published on 01 June 2011

Angulated locking plate in periprosthetic proximal femur fractures: biomechanical testing of a new prototype plate.

scientific article published on 17 June 2012

Ankle joint pressure changes in a pes cavovarus model after lateralizing calcaneal osteotomies

scientific article published on 01 September 2010

Ankle joint pressure in pes cavovarus

scientific article published on 01 December 2007

Assessment of ankle and hindfoot stability and joint pressures using a human cadaveric model of a large lateral talar process excision: a biomechanical study.

scientific article

Assessment of intraosseous femoral head pressures during cement augmentation of the perforated proximal femur nail antirotation blade.

scientific article

Augmented screws in angular stable plating of the proximal humerus: what to do when revision is needed?

scientific article published on 27 August 2014

Biomechanical comparison between standard and inclined screw orientation in dynamic hip screw side-plate fixation: The lift-off phenomenon

scientific article published on 17 November 2018

Biomechanical comparison of a new staple technique with tension band wiring for transverse patella fractures

scientific article published on 27 August 2009

Biomechanical comparison of augmented versus non-augmented sacroiliac screws in a novel hemi-pelvis test model.

scientific article published on 26 August 2016

Biomechanical comparison of three types of bone graft for anterior spondylodesis

scientific article published on 01 January 2013

Biomechanical evaluation of a new augmentation method for enhanced screw fixation in osteoporotic proximal femoral fractures.

scientific article published in December 2006

Biomechanical evaluation of bone-cement augmented Proximal Femoral Nail Antirotation blades in a polyurethane foam model with low density.

scientific article published on 7 August 2011

Biomechanical evaluation of two intramedullary nailing techniques with different locking options in a three-part fracture proximal humerus model

scientific article published on 30 March 2012

Biomechanical in vitro assessment of screw augmentation in locked plating of proximal humerus fractures.

scientific article published on 12 June 2013

Biomechanical investigation of a minimally invasive posterior spine stabilization system in comparison to the Universal Spinal System (USS)

scientific article

Biomechanical performance of different cable and wire cerclage configurations.

scientific article published on 10 November 2012

Bone Mass Distribution of the Distal Tibia in Normal, Osteopenic, and Osteoporotic Conditions: An Ex Vivo Assessment Using HR-pQCT, DXA, and Computational Modelling.

scientific article published on 30 August 2016

Bone cement allocation analysis in artificial cancellous bone structures

scientific article published on 04 October 2016

Bone cement flow analysis by stepwise injection through medical cannulas

scientific article published on 7 October 2016

Cement augmentation of calcar screws may provide the greatest reduction in predicted screw cut-out risk for proximal humerus plating based on validated parametric computational modelling: Augmenting proximal humerus fracture plating

scientific article published on 03 September 2020

Cement augmentation of hip implants in osteoporotic bone: how much cement is needed and where should it go?

scientific article

Cement augmentation of implants--no general cure in osteoporotic fracture treatment. A biomechanical study on non-displaced femoral neck fractures.

scientific article published on 29 July 2015

Cement augmentation of lag screws: an investigation on biomechanical advantages.

scientific article published on 21 December 2012

Cerclage handling for improved fracture treatment. A biomechanical study on the twisting procedure

scientific article published on 01 January 2011

Comparison of calcaneal fixation of a retrograde intramedullary nail with a fixed-angle spiral blade versus a fixed-angle screw

scientific article published on 01 December 2009

DensiProbe Spine: a novel instrument for intraoperative measurement of bone density in transpedicular screw fixation.

scientific article

Development of a technique for cement augmentation of nailed tibiotalocalcaneal arthrodesis constructs

scientific article published on 11 April 2010

Does cancellous bone compaction due to insertion of a blade implant influence the cut-out resistance? A biomechanical study

scientific article published on 25 August 2010

Effect on dynamic mechanical stability and interfragmentary movement of angle-stable locking of intramedullary nails in unstable distal tibia fractures: a biomechanical study.

scientific article published in February 2011

End caps prevent nail migration in elastic stable intramedullary nailing in paediatric femoral fractures: a biomechanical study using synthetic and cadaveric bones.

scientific article published in April 2015

Evaluation of a polyaxial angle-stable volar plate in a distal radius C-fracture model--a biomechanical study

scientific article published on 16 February 2011

Ex vivo evaluation of the polymerization temperatures during cement augmentation of proximal femoral nail antirotation blades

scientific article published on 01 April 2012

Fatigue failure of plated osteoporotic proximal humerus fractures is predicted by the strain around the proximal screws

article

Fatigue performance of angle-stable tibial nail interlocking screws.

scientific article published on 9 August 2012

Feasibility study on the potential of a spiral blade in osteoporotic distal femur fracture fixation

scientific article published on 02 October 2013

Hindfoot joint pressure in supination sprains

scientific article published on 11 January 2012

Implant augmentation: adding bone cement to improve the treatment of osteoporotic distal femur fractures: a biomechanical study using human cadaver bones

scientific article

Implicit modeling of screw threads for efficient finite element analysis of complex bone-implant systems.

scientific article published on 26 April 2016

Importance of locking plate positioning in proximal humeral fractures as predicted by computer simulations

scientific article published on 20 March 2019

Increasing pullout strength of suture anchors in osteoporotic bone using augmentation--a cadaver study

scientific article published on 09 February 2015

Influence of flexible fixation for open book injury after pelvic trauma--a biomechanical study.

scientific article

Intraoperative mechanical bone strength determination in tibiotalocalcaneal fusion: a biomechanical investigation

scientific article published on 01 December 2009

Is a helical shaped implant a superior alternative to the Dynamic Hip Screw for unstable femoral neck fractures? A biomechanical investigation.

scientific article published on 31 October 2008

Limited V-shaped cement augmentation of the proximal femur to prevent secondary hip fractures.

scientific article published on 5 April 2012

Mechanical behavior of fixation components for periprosthetic fracture surgery

scientific article published on 18 September 2013

Mechanical torque measurement predicts load to implant cut-out: a biomechanical study investigating DHS anchorage in femoral heads.

scientific article published on 13 December 2006

Mechanobiologically optimized 3D titanium-mesh scaffolds enhance bone regeneration in critical segmental defects in sheep.

scientific article published in January 2018

Metaphyseal screw augmentation of the LISS-PLT plate with polymethylmethacrylate improves angular stability in osteoporotic proximal third tibial fractures: a biomechanical study in human cadaveric tibiae.

scientific article published in May 2014

Microstructural parameters of bone evaluated using HR-pQCT correlate with the DXA-derived cortical index and the trabecular bone score in a cohort of randomly selected premenopausal women

scientific article

Monitoring Healing Progression and Characterizing the Mechanical Environment in Preclinical Models for Bone Tissue Engineering

scientific article

Multiphasic modelling of bone-cement injection into vertebral cancellous bone.

scientific article published on 27 January 2015

New approaches for cement-based prophylactic augmentation of the osteoporotic proximal femur provide enhanced reinforcement as predicted by non-linear finite element simulations.

scientific article published on 2 March 2017

Nonlinear quasi-static finite element simulations predict in vitro strength of human proximal femora assessed in a dynamic sideways fall setup.

scientific article published on 3 December 2015

Potential of polymethylmethacrylate cement-augmented helical proximal femoral nail antirotation blades to improve implant stability--a biomechanical investigation in human cadaveric femoral heads

scientific article published on 01 February 2012

Prediction of bone strength at the distal tibia by HR-pQCT and DXA

scientific article published on 09 November 2011

Programable Active Fixator System for Systematic In Vivo Investigation of Bone Healing Processes

scientific article published on 22 December 2020

Prophylactic augmentation of the osteoporotic proximal femur-mission impossible?

scientific article published on 07 December 2016

Quantification of cancellous bone-compaction due to DHS Blade insertion and influence upon cut-out resistance.

scientific article published on 13 November 2008

Reinforcing the role of the conventional C-arm--a novel method for simplified distal interlocking.

scientific article

Screw configuration in proximal humerus plating has a significant impact on fixation failure risk predicted by finite element models

scientific article published on 26 April 2019

Secondary Perforation Risk in Plate Osteosynthesis of Unstable Proximal Humerus Fractures: A Biomechanical Investigation of the Effect of Screw Length

scientific article published on 08 August 2019

Smart implants in fracture care - only buzzword or real opportunity?

scientific article published on 17 September 2020

Tension band wiring of the olecranon: is it really a dynamic principle of osteosynthesis?

scientific article published on 09 October 2012

The influence of screw length on predicted cut-out failures for proximal humeral fracture fixations predicted by finite element simulations

scientific article published on 20 March 2019

The locking attachment plate for proximal fixation of periprosthetic femur fractures--a biomechanical comparison of two techniques.

scientific article published on 27 May 2012

The prediction of cyclic proximal humerus fracture fixation failure by various bone density measures

scientific article published on 22 February 2018

Treatment of distal humeral fractures using conventional implants. Biomechanical evaluation of a new implant configuration.

scientific article

Two-leg alternate loading model--a different approach to biomechanical investigations of fixation methods of the injured pelvic ring with focus on the pubic symphysis.

scientific article published on 15 November 2013

Underneath the cerclage: an ex vivo study on the cerclage-bone interface mechanics

scientific article published on 28 June 2012

X-Ray based navigation system for torsional correction - first clinical data.

scientific article

[Biomechanics of implant augmentation]

scientific article published on 01 September 2015

[Steel or titanium for osteosynthesis : A mechanobiological perspective]

scientific article published on 01 February 2017

[The use of DensiProbe™ in hindfoot arthrodesis. Can fusion failure be predicted by mechanical bone strength determination?]

scientific article published on 08 October 2010

List of works by Markus Windolf

A biomechanical comparison of fixed angle locking compression plate osteosynthesis and cement augmented screw osteosynthesis in the management of intra articular calcaneal fractures

A biomechanical study on proximal plate fixation techniques in periprosthetic femur fractures.

A cadaveric biomechanical study comparing the ease of femoral nail insertion: 1.0- vs 1.5-m bow designs

A comparison of parallel and diverging screw angles in the stability of locked plate constructs

Adjacent vertebral failure after vertebroplasty: a biomechanical study of low-modulus PMMA cement.

Analysis of sacro-iliac joint screw fixation: does quality of reduction and screw orientation influence joint stability? A biomechanical study.

Angular stability potentially permits fewer locking screws compared with conventional locking in intramedullary nailed distal tibia fractures: a biomechanical study

Angulated locking plate in periprosthetic proximal femur fractures: biomechanical testing of a new prototype plate.

Ankle joint pressure changes in a pes cavovarus model after lateralizing calcaneal osteotomies

Ankle joint pressure in pes cavovarus

Assessment of ankle and hindfoot stability and joint pressures using a human cadaveric model of a large lateral talar process excision: a biomechanical study.

Assessment of intraosseous femoral head pressures during cement augmentation of the perforated proximal femur nail antirotation blade.

Augmented screws in angular stable plating of the proximal humerus: what to do when revision is needed?

Biomechanical comparison between standard and inclined screw orientation in dynamic hip screw side-plate fixation: The lift-off phenomenon

Biomechanical comparison of a new staple technique with tension band wiring for transverse patella fractures

Biomechanical comparison of augmented versus non-augmented sacroiliac screws in a novel hemi-pelvis test model.

Biomechanical comparison of three types of bone graft for anterior spondylodesis

Biomechanical evaluation of a new augmentation method for enhanced screw fixation in osteoporotic proximal femoral fractures.

Biomechanical evaluation of bone-cement augmented Proximal Femoral Nail Antirotation blades in a polyurethane foam model with low density.

Biomechanical evaluation of two intramedullary nailing techniques with different locking options in a three-part fracture proximal humerus model

Biomechanical in vitro assessment of screw augmentation in locked plating of proximal humerus fractures.

Biomechanical investigation of a minimally invasive posterior spine stabilization system in comparison to the Universal Spinal System (USS)

Biomechanical performance of different cable and wire cerclage configurations.

Bone Mass Distribution of the Distal Tibia in Normal, Osteopenic, and Osteoporotic Conditions: An Ex Vivo Assessment Using HR-pQCT, DXA, and Computational Modelling.

Bone cement allocation analysis in artificial cancellous bone structures

Bone cement flow analysis by stepwise injection through medical cannulas

Cement augmentation of calcar screws may provide the greatest reduction in predicted screw cut-out risk for proximal humerus plating based on validated parametric computational modelling: Augmenting proximal humerus fracture plating

Cement augmentation of hip implants in osteoporotic bone: how much cement is needed and where should it go?

Cement augmentation of implants--no general cure in osteoporotic fracture treatment. A biomechanical study on non-displaced femoral neck fractures.

Cement augmentation of lag screws: an investigation on biomechanical advantages.

Cerclage handling for improved fracture treatment. A biomechanical study on the twisting procedure

Comparison of calcaneal fixation of a retrograde intramedullary nail with a fixed-angle spiral blade versus a fixed-angle screw

DensiProbe Spine: a novel instrument for intraoperative measurement of bone density in transpedicular screw fixation.

Development of a technique for cement augmentation of nailed tibiotalocalcaneal arthrodesis constructs

Does cancellous bone compaction due to insertion of a blade implant influence the cut-out resistance? A biomechanical study

Effect on dynamic mechanical stability and interfragmentary movement of angle-stable locking of intramedullary nails in unstable distal tibia fractures: a biomechanical study.

End caps prevent nail migration in elastic stable intramedullary nailing in paediatric femoral fractures: a biomechanical study using synthetic and cadaveric bones.

Evaluation of a polyaxial angle-stable volar plate in a distal radius C-fracture model--a biomechanical study

Ex vivo evaluation of the polymerization temperatures during cement augmentation of proximal femoral nail antirotation blades

Fatigue failure of plated osteoporotic proximal humerus fractures is predicted by the strain around the proximal screws

Fatigue performance of angle-stable tibial nail interlocking screws.

Feasibility study on the potential of a spiral blade in osteoporotic distal femur fracture fixation

Hindfoot joint pressure in supination sprains

Implant augmentation: adding bone cement to improve the treatment of osteoporotic distal femur fractures: a biomechanical study using human cadaver bones

Implicit modeling of screw threads for efficient finite element analysis of complex bone-implant systems.

Importance of locking plate positioning in proximal humeral fractures as predicted by computer simulations

Increasing pullout strength of suture anchors in osteoporotic bone using augmentation--a cadaver study

Influence of flexible fixation for open book injury after pelvic trauma--a biomechanical study.

Intraoperative mechanical bone strength determination in tibiotalocalcaneal fusion: a biomechanical investigation

Is a helical shaped implant a superior alternative to the Dynamic Hip Screw for unstable femoral neck fractures? A biomechanical investigation.

Limited V-shaped cement augmentation of the proximal femur to prevent secondary hip fractures.

Mechanical behavior of fixation components for periprosthetic fracture surgery

Mechanical torque measurement predicts load to implant cut-out: a biomechanical study investigating DHS anchorage in femoral heads.

Mechanobiologically optimized 3D titanium-mesh scaffolds enhance bone regeneration in critical segmental defects in sheep.

Metaphyseal screw augmentation of the LISS-PLT plate with polymethylmethacrylate improves angular stability in osteoporotic proximal third tibial fractures: a biomechanical study in human cadaveric tibiae.

Microstructural parameters of bone evaluated using HR-pQCT correlate with the DXA-derived cortical index and the trabecular bone score in a cohort of randomly selected premenopausal women

Monitoring Healing Progression and Characterizing the Mechanical Environment in Preclinical Models for Bone Tissue Engineering

Multiphasic modelling of bone-cement injection into vertebral cancellous bone.

New approaches for cement-based prophylactic augmentation of the osteoporotic proximal femur provide enhanced reinforcement as predicted by non-linear finite element simulations.

Nonlinear quasi-static finite element simulations predict in vitro strength of human proximal femora assessed in a dynamic sideways fall setup.

Potential of polymethylmethacrylate cement-augmented helical proximal femoral nail antirotation blades to improve implant stability--a biomechanical investigation in human cadaveric femoral heads

Prediction of bone strength at the distal tibia by HR-pQCT and DXA

Programable Active Fixator System for Systematic In Vivo Investigation of Bone Healing Processes

Prophylactic augmentation of the osteoporotic proximal femur-mission impossible?

Quantification of cancellous bone-compaction due to DHS Blade insertion and influence upon cut-out resistance.

Reinforcing the role of the conventional C-arm--a novel method for simplified distal interlocking.

Screw configuration in proximal humerus plating has a significant impact on fixation failure risk predicted by finite element models

Secondary Perforation Risk in Plate Osteosynthesis of Unstable Proximal Humerus Fractures: A Biomechanical Investigation of the Effect of Screw Length

Smart implants in fracture care - only buzzword or real opportunity?

Tension band wiring of the olecranon: is it really a dynamic principle of osteosynthesis?

The influence of screw length on predicted cut-out failures for proximal humeral fracture fixations predicted by finite element simulations

The locking attachment plate for proximal fixation of periprosthetic femur fractures--a biomechanical comparison of two techniques.

The prediction of cyclic proximal humerus fracture fixation failure by various bone density measures

Treatment of distal humeral fractures using conventional implants. Biomechanical evaluation of a new implant configuration.

Two-leg alternate loading model--a different approach to biomechanical investigations of fixation methods of the injured pelvic ring with focus on the pubic symphysis.

Underneath the cerclage: an ex vivo study on the cerclage-bone interface mechanics

X-Ray based navigation system for torsional correction - first clinical data.

[Biomechanics of implant augmentation]

[Steel or titanium for osteosynthesis : A mechanobiological perspective]