A methodology to determine anisotropy effects in non-cubic coatings

Adhesion improvement of hydrogenated diamond-like carbon thin films by pre-deposition plasma treatment of rubber substrate

Advanced TiC/a-C:H nanocomposite coatings deposited by magnetron sputtering

Antimicrobial Electrodeposited Silver-Containing Calcium Phosphate Coatings

scientific article published on 14 January 2020

Apparently homogeneous but intrinsically intermittent flow of taper-free metallic glass nanopillars

article published in 2012

Bioinspired Cilia Sensors with Graphene Sensing Elements Fabricated Using 3D Printing and Casting

scientific article published on 30 June 2019

Biomimetic Soft Polymer Microstructures and Piezoresistive Graphene MEMS Sensors Using Sacrificial Metal 3D Printing

scientific article published on 04 January 2021

Comments on “microstructural evolution during high-temperature oxidation of Ti2AlC ceramics”

Copper-mediated homogeneous living radical polymerization of acrylamide with waxy potato starch-based macroinitiator.

scientific article published on 15 March 2018

Crystal growth mechanism of calcium phosphate coatings on titanium by electrochemical deposition

Deformation and failure mechanism of nano-composite coatings under nano-indentation

scholarly article by D. Galvan et al published August 2006 in Surface & Coatings Technology

Deposition and characterization of hydrogenated diamond-like carbon thin films on rubber seals

Determination of the sp3 C content of a-C films through EELS analysis in the TEM

Development of self-healing epoxy composites via incorporation of microencapsulated epoxy and mercaptan in poly(methyl methacrylate) shell

Early stages of oxidation of Ti3AlC2 ceramics

article published in 2008

Effect of carbon concentration and argon flow rate on the microstructure and triboperformance of magnetron sputtered WS2/a-C coatings

article published in 2017

Effect of process parameters on mechanical and tribological performance of pulsed-DC sputtered TiC/a-C:H nanocomposite films

article published in 2010

Effect of pulse scheme on the microstructural evolution, residual stress state and mechanical performance of resistance spot welded DP1000-GI steel

Effect of stacking fault energy on the restoration mechanisms and mechanical properties of friction stir welded copper alloys

Effect of surface reactions on steel, Al2O3 and Si3N4 counterparts on their tribological performance with polytetrafluoroethylene filled composites

Effect of tempering temperature on microstructure and sliding wear property of laser quenched 4Cr13 steel

Effects of size on the mechanical response of metallic glasses investigated through in situ TEM bending and compression experiments

Enhanced C3+ alcohol synthesis from syngas using KCoMoSx catalysts: effect of the Co-Mo ratio on catalyst performance

scientific article published in September 2020

Flexible diamond-like carbon film coated on rubber

Flexible diamond-like carbon films on rubber: Friction and the effect of viscoelastic deformation of rubber substrates

Flexible diamond-like carbon films on rubber: On the origin of self-acting segmentation and film flexibility

Flexible protective diamond-like carbon film on rubber

Formation of metal F bonds during frictional sliding: Influence of water and applied load

Growth of nanocomposite films: From dynamic roughening to dynamic smoothening

Healing performance of Ti2AlC ceramic studied with in situ microcantilever bending

High temperature healing of Ti2AlC: On the origin of inhomogeneous oxide scale

article published in 2011

High throughput deposition of hydrogenated amorphous carbon coatings on rubber with expanding thermal plasma

In situ bending of layered compounds: The role of anisotropy in Ti2AlC microcantilevers

Influence of deposition parameters on the structure and mechanical properties of nanocomposite coatings

Influence of hardness and roughness on the tribological performance of TiC/a-C nanocomposite coatings

Interface fracture behavior of zinc coatings on steel: Experiments and finite element calculations

Intrinsic and extrinsic size effects in the deformation of metallic glass nanopillars

Jerky-type phenomena at nanocomposite surfaces: The breakdown of the Coulomb friction law

Large-scale synthesis of defect-selective graphene quantum dots by ultrasonic-assisted liquid-phase exfoliation

scholarly article in Carbon, vol. 109, November 2016

Laser clad ZrO2Y2O3 ceramic/Ni-base alloy composite coatings

article published in 1995

Laser cladding of ZrO2-(Ni alloy) composite coating

Magnetron reactively sputtered Ti-DLC coatings on HNBR rubber: The influence of substrate bias

article

Mechanical behavior and failure mechanism of resistance spot welded DP1000 dual phase steel

Mechanical properties of attapulgite clay reinforced polyurethane shape-memory nanocomposites

Micro-mechanics of nanostructured carbon/shape memory polymer hybrid thin film

scientific article published on 8 October 2015

Micromechanical evaluation of DP1000-GI dual-phase high-strength steel resistance spot weld.

scientific article published on 11 September 2018

Microstructural and frictional control of diamond-like carbon films deposited on acrylic rubber by plasma assisted chemical vapor deposition

Microstructural and mechanical properties of low-carbon ultra-fine bainitic steel produced by multi-step austempering process

Microstructural control of TiC/a-C nanocomposite coatings with pulsed magnetron sputtering

article published in 2008

Microstructure and chemical bonding of DLC films deposited on ACM rubber by PACVD

Microstructure and tribological performance of diamond-like carbon films deposited on hydrogenated rubber

Microstructure evolutions of graded high-vanadium tool steel composite coating in-situ fabricated via atmospheric plasma beam alloying

Microstructure of laser-clad SiC-(Ni alloy) composite coating

article published in 1995

Nanopillar Fabrication with Focused Ion Beam Cutting

scientific article published on 04 July 2014

Nanostructured TiC/a-C coatings for low friction and wear resistant applications

Ni-toughened nc-TiN/a-SiNx nanocomposite thin films

On the S/W stoichiometry and triboperformance of WS x C(H) coatings deposited by magnetron sputtering

On the control of deposition process for enhanced mechanical properties of nc-TiC/a-C:H coatings with DC magnetron sputtering at low or high ion flux

On the quantification of unbound hydrogen in diamond-like carbon-based thin films

On the significance of running-in of hard nc-TiC/a-C:H coating for short-term repeating machining

Optical and microstructural properties of Au alloyed Al–O sputter deposited coatings

Oxidation-induced crack healing in Ti3AlC2 ceramics

scientific article (publication date: 2008)

Oxide-scale growth on Cr2AlC ceramic and its consequence for self-healing

Self-Lubrication and Wear Behavior of TiC/a-C:H Nanocomposite Coatings

Size effects and ductility of Al-based metallic glass

article published in 2012

Strength of submicrometer diameter pillars of metallic glasses investigated within situtransmission electron microscopy

Structural and functional properties of nanocomposite Au–WO3 coatings

Surface alloying of high-vanadium high-speed steel on ductile iron using plasma transferred arc technique: Microstructure and wear properties

Synthesis of mixed alcohols with enhanced C3+ alcohol production by CO hydrogenation over potassium promoted molybdenum sulfide

scientific article published in June 2019

Synthesis of ultra-smooth and ultra-low friction DLC based nanocomposite films on rough substrates

TEM Characterization of W-O-N Coatings

TEM characterization of a Cr/Ti/TiC graded interlayer for magnetron-sputtered TiC/a-C:H nanocomposite coatings

TEM study of the initial oxide scales of Ti2AlC

Template-Free Synthesis of Nanoporous Nickel and Alloys as Binder-Free Current Collectors of Li Ion Batteries

scholarly article published 25 May 2018

The Influence of Chemical Alloying on the High Temperature Wear Resistance of H-Free DLC Coatings

The Relationship between Bulk Silicone and Benzophenone-Initiated Hydrogel Coating Properties.

scientific article published on 16 May 2018

TiC/a-C Nanocomposite Coatings for Low Friction and Wear Resistance

TiNi shape memory alloy coated with tungsten: a novel approach for biomedical applications

scientific article published on 31 January 2014

Tribological behavior of W-DLC coated rubber seals

Tribological behaviour of laser-clad TiCp composite coating

Tribological performance of DLC films deposited on ACM rubber by PACVD

article published in 2011

Tribological properties of nc-TiC/a-C:H coatings prepared by magnetron sputtering at low and high ion bombardment of the growing film

Two phenomenological models to predict the single peak flow stress curves up to the peak during hot deformation

Ultra-high temperature ablation behavior of Ti2AlC ceramics under an oxyacetylene flame

Ultralightweight and 3D Squeezable Graphene-Polydimethylsiloxane Composite Foams as Piezoresistive Sensors

scientific article published on 11 September 2019

Wear and friction performance of PTFE filled epoxy composites with a high concentration of SiO2 particles