A parametric study of laser interference surface patterning of dental zirconia: Effects of laser parameters on topography and surface quality

scientific article

Assessment in Si3N4 of a new method for determining the fracture toughness from a surface notch micro-machined by ultra-short pulsed laser ablation

Coefficient of friction and wear resistance of zirconia–MWCNTs composites

Contact Fatigue in Ceramic Laminated Composites

article

Contact fatigue of veneer feldspathic porcelain on dental zirconia

scientific article

Contact strength of ceramic laminates

Corrigendum to “Hydrofluoric acid etching of dental zirconia. Part 2: Effect on flexural strength and ageing behavior” [J. Eur. Ceram. Soc. 36 (1) (January 2016) 135–145]

scholarly article published in Journal of the European Ceramic Society

Effect of Low Temperature Degradation on Scratch Behaviour of 3Y-TZP

Effect of heat treatment on wear damage mechanisms in 3Y-TZP ceramics

Effect of sandblasting and residual stress on strength of zirconia for restorative dentistry applications

scientific article published on 17 September 2013

Enhanced reliability of yttria-stabilized zirconia for dental applications

scientific article published on 30 January 2015

Fatigue Behavior of Alumina–Zirconia Multilayered Ceramics

article

Fatigue of Cemented Carbides

article

Fracture and Fatigue Behaviour of Mullite/Molybdenum Composites

article

Fracture behaviour of an Al2O3-ZrO2 multi-layered ceramic with residual stresses due to phase transformations*

Fracture behaviour of thermal barrier coatings after high temperature exposure in air

Fracture of Ceramics with Near Surface Gradient Residual Stresses

Fracture of Layered Ceramics

Fracture toughness and mechanical strength of Y-TZP/PSZ ceramics

Fracture toughness of zirconia from a shallow notch produced by ultra-short pulsed laser ablation

article by Miquel Turon-Vinas & Marc Anglada published December 2014 in Journal of the European Ceramic Society

Hydrofluoric acid etching of dental zirconia. Part 1: etching mechanism and surface characterization

Hydrofluoric acid etching of dental zirconia. Part 2: effect on flexural strength and ageing behavior

Influence of the Cone Crack Geometry on the Strength Degradation

Influence of the Martensitic Transformation on the Fatigue Life of Austenitic Stainless Steels

article

Instrumented Indentation of Layered Ceramic Materials

Material removal mechanisms by EDM of zirconia reinforced MWCNT nanocomposites

Mechanical characterization of nano-reinforced silica based sol–gel hybrid coatings on AISI 316L stainless steel using nanoindentation techniques

scholarly article by Josefina Ballarre et al published July 2009 in Surface & Coatings Technology

Mechanical properties and thermal shock behaviour of an alumina/zirconia functionally graded material prepared by electrophoretic deposition

Micropillar compression inside zirconia degraded layer

Monotonic and cyclic Hertzian fracture of a glass coating on titanium-based implants

scholarly article by J PAVON et al published August 2006 in Acta Materialia

Nanoindentation and fracture toughness of nanostructured zirconia/multi-walled carbon nanotube composites

Nucleation of Shear Bands on EB-PVD Thermal Barriers Coatings under Hertzian Indentations

Osseointegration improvement by plasma electrolytic oxidation of modified titanium alloys surfaces.

scientific article

Phase transformation and subsurface damage in 3Y-TZP after sandblasting

scientific article

Processing and characterization of high-density zirconia–carbon nanotube composites

Processing, nanoindentation and scratch testing of alumina-coated YTZP

Residual stresses, strength and toughness of laminates with different layer thickness ratios

Resistance to Contact Deformation and Damage of Hard Ceramics

scientific article

Roughness gradients on zirconia for rapid screening of cell-surface interactions: Fabrication, characterization and application

scientific article published on 26 May 2016

Selective etching of injection molded zirconia-toughened alumina: Towards osseointegrated and antibacterial ceramic implants

scientific article published on 14 September 2016

Size and plasticity effects in zirconia micropillars compression

article by Erik Camposilvan & Marc Anglada published January 2016 in Acta Materialia

Sliding Wear Behavior of a Duplex Stainless Steel

Small-scale mechanical behavior of zirconia

Strength and grinding residual stresses of Y-TZP with duplex microstructures

Surface Phase Transformation During Grinding of Y-TZP

Surface microstructural changes of spark plasma sintered zirconia after grinding and annealing

article published in 2016

Surface roughened zirconia: towards hydrothermal stability

scientific article

The influence of unshielded small cracks in the fracture toughness of yttria and of ceria stabilised zirconia

Thermal Shock Behavior of an Al 2 O 3 /ZrO 2 Multilayered Ceramic with Residual Stresses due to Phase Transformations

Tomography of indentation cracks in feldspathic dental porcelain on zirconia

scientific article published on 04 February 2013