List of works - Nicky Eshtiaghi

A quantitative framework for the formation of liquid marbles and hollow granules from hydrophobic powders

A review of wet air oxidation and Thermal Hydrolysis technologies in sludge treatment.

scientific article published on 31 December 2013

A study of gas emissions during the firing process from bricks incorporating biosolids

scientific article published on 6 January 2018

Accelerating the spread of the active mixing region in a sludge simulant using submerged jets

An analysis of the thermodynamic conditions for solid powder particles spreading over liquid surface

An overview of biological processes and their potential for CO2 capture

scientific article

Biotreatment of formaldehyde-contaminated air in a trickle bed bioreactor

Cavern Formation in Non-Newtonian Media in a Vessel Agitated by Submerged Recirculating Liquid Jets

Clear model fluids to emulate the rheological properties of thickened digested sludge

scientific article published on 17 March 2012

Comparison between classical Kelvin-Voigt and fractional derivative Kelvin-Voigt models in prediction of linear viscoelastic behaviour of waste activated sludge

scientific article

Comparison of mesophilic and thermophilic methane production potential of acids rich and high-strength landfill leachate at different initial organic loadings and food to inoculum ratios

scientific article published on 16 January 2020

Continuous Production of Janus and Composite Liquid Marbles with Tunable Coverage

scientific article published on 7 July 2016

Control of the mixing time in vessels agitated by submerged recirculating jets.

scientific article published on 24 January 2018

Electrochemically induced actuation of liquid metal marbles

scientific article published on 24 May 2013

Enhanced electrochemical heavy metal ion sensor using liquid metal marbles - towards on-chip application

Enhancing Impeller Power Efficiency and Solid–Liquid Mass Transfer in an Agitated Vessel with Dual Impellers through Process Intensification

Evaluation of single and two stage anaerobic digestion of landfill leachate: Effect of pH and initial organic loading rate on volatile fatty acid (VFA) and biogas production

scientific article published on 23 December 2017

Evaluation of thermal hydrolysis efficiency of mechanically dewatered sewage sludge via rheological measurement

scientific article published on 10 March 2017

Evolution of flow regimes in non-Newtonian liquids under gas sparging

article published in 2018

Flow patterns in the mixing of sludge simulant with jet recirculation system

Flow regimes in the mixing of municipal sludge simulant using submerged, recirculating jets

Formation of hollow granules from liquid marbles: Small scale experiments

Good practice groundwork: Managing initial meetings with higher degree research students

Impact of gas injection on physicochemical properties of waste activated sludge: A linear relationship between the change of viscoelastic properties and the change of other physiochemical properties

scientific article published on 17 July 2018

Impact of gas injection on the apparent viscosity and viscoelastic property of waste activated sewage sludge

scientific article

Impact of rheological properties of substrate on anaerobic digestion and digestate dewaterability: New insights through rheological and physico-chemical interaction

scientific article published on 20 November 2018

Impact of temperature and duration of thermal treatment on different concentrations of anaerobic digested sludge: Kinetic similarity of organic matter solubilisation and sludge rheology

Impact of thermal treatment on the rheological properties and composition of waste activated sludge: COD solubilisation as a footprint of rheological changes

article

Improvement of anaerobic digestion of sewage mixed sludge using free nitrous acid and Fenton pre-treatment

Influence of gas injection on viscous and viscoelastic properties of Xanthan gum.

scientific article published on 3 February 2018

Intensification of sonochemical reactions in solid-liquid systems under fully suspended condition

Liquid Metal Marbles

article published in 2012

Liquid marble formation: Spreading coefficients or kinetic energy?

Measuring active volume using electrical resistance tomography in a gas-sparged model anaerobic digester

Mixing characteristics of sludge simulant in a model anaerobic digester

scientific article published on 6 January 2016

Net positive energy wastewater treatment plant via thermal pre-treatment of sludge: A theoretical case study.

scientific article published on 13 January 2017

Optimum solids concentration for solids suspension and solid–liquid mass transfer in agitated vessels

Phase retrieval tomography in the presence of noise

Possible use of biosolids in fired-clay bricks

article by Aruna Ukwatta et al published August 2015 in Construction and Building Materials

Predicting the apparent viscosity and yield stress of digested and secondary sludge mixtures

scientific article

Predicting the apparent viscosity and yield stress of mixtures of primary, secondary and anaerobically digested sewage sludge: Simulating anaerobic digesters

scientific article published on 17 May 2016

Producing hollow granules from hydrophobic powders in high-shear mixer granulators

Proxy model materials to simulate the elastic properties of digested municipal sludge

scientific article published on 3 July 2013

Rheological characterisation of biologically treated and non-treated putrescible food waste

scientific article published on 7 October 2017

Rheological characterisation of municipal sludge: a review

scientific article published on 09 July 2013

Rheological characterisation of primary and secondary sludge: Impact of solids concentration

article published in 2014

Rheological characterisation of thermally-treated anaerobic digested sludge: impact of temperature and thermal history

scientific article published on 11 March 2014

Rheological characterization of thermal hydrolysed waste activated sludge

scientific article published on 23 March 2019

Rheological measurements as a tool for monitoring the performance of high pressure and high temperature treatment of sewage sludge.

scientific article published on 16 February 2017

Rheology of a primary and secondary sewage sludge mixture: Dependency on temperature and solid concentration ⬇️

scientific article published on May 4, 2013

Submerged Recirculating Liquid Jet Mixing: A Comparison of Nozzle Orientation and Tank Aspect Ratio

The apparent viscosity and yield stress of mixtures of primary and secondary sludge: Impact of volume fraction of secondary sludge and total solids concentration

The impact of temperature on the rheological behaviour of anaerobic digested sludge

The influence of injection velocity and relaxation time on the spreading of tracers in viscoelastic liquids agitated by submerged, recirculating jets with low reynolds numbers

The laminar/turbulent transition in a sludge pipeline

scientific article

The rheological behaviour of anaerobic digested sludge

scientific article published on 01 September 2011

The viscoelastic behaviour of raw and anaerobic digested sludge: strong similarities with soft-glassy materials

scientific article published on 9 October 2012

List of works by Nicky Eshtiaghi

A quantitative framework for the formation of liquid marbles and hollow granules from hydrophobic powders

A review of wet air oxidation and Thermal Hydrolysis technologies in sludge treatment.

A study of gas emissions during the firing process from bricks incorporating biosolids

Accelerating the spread of the active mixing region in a sludge simulant using submerged jets

An analysis of the thermodynamic conditions for solid powder particles spreading over liquid surface

An overview of biological processes and their potential for CO2 capture

Biotreatment of formaldehyde-contaminated air in a trickle bed bioreactor

Cavern Formation in Non-Newtonian Media in a Vessel Agitated by Submerged Recirculating Liquid Jets

Clear model fluids to emulate the rheological properties of thickened digested sludge

Comparison between classical Kelvin-Voigt and fractional derivative Kelvin-Voigt models in prediction of linear viscoelastic behaviour of waste activated sludge

Comparison of mesophilic and thermophilic methane production potential of acids rich and high-strength landfill leachate at different initial organic loadings and food to inoculum ratios

Continuous Production of Janus and Composite Liquid Marbles with Tunable Coverage

Control of the mixing time in vessels agitated by submerged recirculating jets.

Electrochemically induced actuation of liquid metal marbles

Enhanced electrochemical heavy metal ion sensor using liquid metal marbles - towards on-chip application

Enhancing Impeller Power Efficiency and Solid–Liquid Mass Transfer in an Agitated Vessel with Dual Impellers through Process Intensification

Evaluation of single and two stage anaerobic digestion of landfill leachate: Effect of pH and initial organic loading rate on volatile fatty acid (VFA) and biogas production

Evaluation of thermal hydrolysis efficiency of mechanically dewatered sewage sludge via rheological measurement

Evolution of flow regimes in non-Newtonian liquids under gas sparging

Flow patterns in the mixing of sludge simulant with jet recirculation system

Flow regimes in the mixing of municipal sludge simulant using submerged, recirculating jets

Formation of hollow granules from liquid marbles: Small scale experiments

Good practice groundwork: Managing initial meetings with higher degree research students

Impact of gas injection on physicochemical properties of waste activated sludge: A linear relationship between the change of viscoelastic properties and the change of other physiochemical properties

Impact of gas injection on the apparent viscosity and viscoelastic property of waste activated sewage sludge

Impact of rheological properties of substrate on anaerobic digestion and digestate dewaterability: New insights through rheological and physico-chemical interaction

Impact of temperature and duration of thermal treatment on different concentrations of anaerobic digested sludge: Kinetic similarity of organic matter solubilisation and sludge rheology

Impact of thermal treatment on the rheological properties and composition of waste activated sludge: COD solubilisation as a footprint of rheological changes

Improvement of anaerobic digestion of sewage mixed sludge using free nitrous acid and Fenton pre-treatment

Influence of gas injection on viscous and viscoelastic properties of Xanthan gum.

Intensification of sonochemical reactions in solid-liquid systems under fully suspended condition

Liquid Metal Marbles

Liquid marble formation: Spreading coefficients or kinetic energy?

Measuring active volume using electrical resistance tomography in a gas-sparged model anaerobic digester

Mixing characteristics of sludge simulant in a model anaerobic digester

Net positive energy wastewater treatment plant via thermal pre-treatment of sludge: A theoretical case study.

Optimum solids concentration for solids suspension and solid–liquid mass transfer in agitated vessels

Phase retrieval tomography in the presence of noise

Possible use of biosolids in fired-clay bricks

Predicting the apparent viscosity and yield stress of digested and secondary sludge mixtures

Predicting the apparent viscosity and yield stress of mixtures of primary, secondary and anaerobically digested sewage sludge: Simulating anaerobic digesters

Producing hollow granules from hydrophobic powders in high-shear mixer granulators

Proxy model materials to simulate the elastic properties of digested municipal sludge

Rheological characterisation of biologically treated and non-treated putrescible food waste

Rheological characterisation of municipal sludge: a review

Rheological characterisation of primary and secondary sludge: Impact of solids concentration

Rheological characterisation of thermally-treated anaerobic digested sludge: impact of temperature and thermal history

Rheological characterization of thermal hydrolysed waste activated sludge

Rheological measurements as a tool for monitoring the performance of high pressure and high temperature treatment of sewage sludge.

Rheology of a primary and secondary sewage sludge mixture: Dependency on temperature and solid concentration ⬇️

Submerged Recirculating Liquid Jet Mixing: A Comparison of Nozzle Orientation and Tank Aspect Ratio

The apparent viscosity and yield stress of mixtures of primary and secondary sludge: Impact of volume fraction of secondary sludge and total solids concentration

The impact of temperature on the rheological behaviour of anaerobic digested sludge

The influence of injection velocity and relaxation time on the spreading of tracers in viscoelastic liquids agitated by submerged, recirculating jets with low reynolds numbers

The laminar/turbulent transition in a sludge pipeline

The rheological behaviour of anaerobic digested sludge

The viscoelastic behaviour of raw and anaerobic digested sludge: strong similarities with soft-glassy materials

The viscoelastic characterisation of thermally-treated waste activated sludge

Variation in physical and mechanical properties of fired-clay bricks incorporating ETP biosolids