List of works - Owen Addison

A call for action to the biomaterial community to tackle antimicrobial resistance

scientific article published on 21 August 2020

A quantitative method to measure biofilm removal efficiency from complex biomaterial surfaces using SEM and image analysis

scientific article

A synergistic effect of albumin and H₂O₂ accelerates corrosion of Ti6Al4V.

scientific article

Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants

scientific article

Adherence of oral streptococci to nanostructured titanium surfaces.

scientific article published on 11 October 2015

Adhesive Cementation and the Strengthening of All-Ceramic Dental Restorations

An In Vitro Model for the Development of Mature Bone Containing an Osteocyte Network

article

Application of analytical stress solutions to bi-axially loaded dental ceramic-dental cement bilayers

scientific article published in October 2008

Atmospheric moisture effects on the testing rate and cementation seating load following resin-strengthening of a soda lime glass analogue for dental porcelain.

scientific article published on 3 September 2013

Atraumatic surgical extrusion to improve tooth restorability: A clinical report

scientific article published on 21 January 2016

Biaxial flexure strength determination of endodontically accessed ceramic restorations

scientific article

Biofilm formation on bone-anchored hearing aids.

scientific article

Can a soda-lime glass be used to demonstrate how patterns of strength dependence are influenced by pre-cementation and resin-cementation variables?

scientific article published on 2 May 2012

Data acquisition variability using profilometry to produce accurate mean total volumetric wear and mean maximum wear depth measurements for the OHSU oral wear simulator

scientific article

Deformation of a Dental Ceramic following Adhesive Cementation

article

Disruption of enamel crystal formation quantified by synchrotron microdiffraction

scientific article published on 7 September 2012

Do 'passive' medical titanium surfaces deteriorate in service in the absence of wear?

scientific article

Do oval posts improve fracture resistance of teeth with oval root canals?

Favorable residual stress induction by resin-cementation on dental porcelain.

scientific article

Fluid exudates from inflamed bone-anchored hearing aids demonstrate elevated levels of cytokines and biomarkers of tissue and bone metabolism

scientific article published in April 2010

Glass ionomer cements with milled, dry chlorhexidine hexametaphosphate filler particles to provide long-term antimicrobial properties with recharge capacity

scientific article published on 21 September 2018

Improved bonding of zirconia substructures to resin using a "glaze-on" technique

scientific article published on 21 December 2011

Improving our understanding of metal implant failures: Multiscale chemical imaging of exogenous metals in ex-vivo biological tissues

scientific article published on 05 June 2019

Improving the standard of the standard for glass ionomers: an alternative to the compressive fracture strength test for consideration?

scientific article published on 9 December 2011

In Situ Synchrotron X-Ray Diffraction Characterization of Corrosion Products of a Ti-Based Metallic Glass for Implant Applications

scientific article published on 16 September 2018

In situ measurement of dental resin-based composite volumetric shrinkage and temperature effects using in-fibre bragg grating methods

scientific article published on 29 March 2019

In vitro bioactivity of titanium-doped bioglass

scientific article published on 07 May 2014

In-Situ Synchrotron X-ray Characterization of Corrosion Products in Zr Artificial Pits in Simulated Physiological Solutions

Influence of Cobalt Ions on Collagen Gel Formation and Their Interaction with Osteoblasts

scientific article published on 30 August 2018

Initial fracture resistance and curing temperature rise of ten contemporary resin-based composites with increasing radiant exposure.

scientific article

Intracoronal stress transfer through enamel following RBC photopolymerisation: A synchrotron X-ray study ⬇️

scientific article published on 14 August 2018

Laminated ceramics with elastic interfaces: a mechanical advantage?

scientific article published on 30 December 2014

Lipopolysaccharide inhibits or accelerates biomedical titanium corrosion depending on environmental acidity

scientific article published on 30 January 2015

Lymphoid aggregates that resemble tertiary lymphoid organs define a specific pathological subset in metal-on-metal hip replacements

scientific article

Machining variability impacts on the strength of a 'chair-side' CAD-CAM ceramic

scientific article published on 11 May 2012

Mechanisms of Atomization from Rotary Dental Instruments and Its Mitigation

scientific article published on 16 December 2020

Origin of micro-scale heterogeneity in polymerisation of photo-activated resin composites

scientific article published on 15 April 2020

Outcomes of implant-based oral rehabilitation in head and neck oncology patients-a retrospective evaluation of a large, single regional service cohort

scientific article published on 05 March 2019

Oxygen inhibition and incremental layer bond strengths of resin composites

scientific article

Paternal low protein diet programs preimplantation embryo gene expression, fetal growth and skeletal development in mice

scientific article published on 8 February 2017

Quantifying the strength of a resin-coated dental ceramic.

scientific article

Resin strengthening of dental ceramics—The impact of surface texture and silane

Seating load parameters impact on dental ceramic reinforcement conferred by cementation with resin-cements

scientific article published on 15 June 2010

Strength determination of brittle materials as curved monolithic structures.

scientific article published on 10 February 2014

Strength-limiting damage in lithium silicate glass-ceramics associated with CAD-CAM

scientific article published on 16 November 2018

Surface Finish has a Critical Influence on Biofilm Formation and Mammalian Cell Attachment to Additively Manufactured Prosthetics

Survival of dental implants placed in autogenous bone grafts and bone flaps in head and neck oncology patients: a systematic review

article

Synchrotron X-ray diffraction and scanning electron microscopy to understand enamel affected by metabolic disorder mucopolysaccharidosis

scientific article published on 12 January 2016

Synchrotron X-ray diffraction to understand crystallographic texture of enamel affected by Hunter syndrome

scientific article published on 20 April 2017

Tailoring selective laser melting process for titanium drug-delivering implants with releasing micro-channels

scholarly article published March 2018

Testing rate and cementation seating load effects on resin-strengthening of a dental porcelain analogue.

scientific article published on 14 March 2013

The Current Evidence on Retaining or Prosthodontically Replacing Retained Deciduous Teeth in the Adult Hypodontia Patient: A Systematic Review

scientific article published on 01 March 2018

The crushing truth about glass ionomer restoratives: exposing the standard of the standard

scientific article

The deformation and strength of a dental ceramic following resin-cement coating.

scientific article published on 3 November 2010

The design of additively manufactured lattices to increase the functionality of medical implants

scientific article published on 13 October 2018

The effect of thermocycling on the strength of porcelain laminate veneer (PLV) materials

scientific article published on 01 June 2003

The impact of endodontic access on the biaxial flexure strength of dentine-bonded crown substrates - anin vitrostudy

scientific article published on 21 January 2016

The impact of hydrofluoric acid surface treatments on the performance of a porcelain laminate restorative material

scientific article published on 18 April 2006

The impact of modifying alumina air abrasion parameters on the fracture strength of a porcelain laminate restorative material

scientific article published on 27 December 2006

The impact of resin-coating on sub-critical crack extension in a porcelain laminate veneer material.

scientific article published on 2 March 2017

The influence of cement lute, thermocycling and surface preparation on the strength of a porcelain laminate veneering material

scientific article published in March 2004

The influence of resin flexural modulus on the magnitude of ceramic strengthening

article published in 2012

The oral health needs of children, adolescents and young adults affected by a mucopolysaccharide disorder

scientific article

The strength of sintered and adhesively bonded zirconia/veneer-ceramic bilayers.

scientific article published on 15 August 2014

TiO2 nanoparticles can selectively bind CXCL8 impacting on neutrophil chemotaxis.

scientific article published on 19 January 2018

Time-dependent Enhanced Corrosion of Ti6Al4V in the Presence of H2O2 and Albumin.

scientific article published on 16 February 2018

Titanium phosphate glass microspheres for bone tissue engineering.

scientific article

Transient and residual stresses in a pressable glass-ceramic before and after resin-cement coating determined using profilometry.

scientific article published on 4 March 2011

Transient and residual stresses induced during the sintering of two dentin ceramics ⬇️

scientific article published on December 16, 2010

List of works by Owen Addison

A call for action to the biomaterial community to tackle antimicrobial resistance

A quantitative method to measure biofilm removal efficiency from complex biomaterial surfaces using SEM and image analysis

A synergistic effect of albumin and H₂O₂ accelerates corrosion of Ti6Al4V.

Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants

Adherence of oral streptococci to nanostructured titanium surfaces.

Adhesive Cementation and the Strengthening of All-Ceramic Dental Restorations

An In Vitro Model for the Development of Mature Bone Containing an Osteocyte Network

Application of analytical stress solutions to bi-axially loaded dental ceramic-dental cement bilayers

Atmospheric moisture effects on the testing rate and cementation seating load following resin-strengthening of a soda lime glass analogue for dental porcelain.

Atraumatic surgical extrusion to improve tooth restorability: A clinical report

Biaxial flexure strength determination of endodontically accessed ceramic restorations

Biofilm formation on bone-anchored hearing aids.

Can a soda-lime glass be used to demonstrate how patterns of strength dependence are influenced by pre-cementation and resin-cementation variables?

Data acquisition variability using profilometry to produce accurate mean total volumetric wear and mean maximum wear depth measurements for the OHSU oral wear simulator

Deformation of a Dental Ceramic following Adhesive Cementation

Disruption of enamel crystal formation quantified by synchrotron microdiffraction

Do 'passive' medical titanium surfaces deteriorate in service in the absence of wear?

Do oval posts improve fracture resistance of teeth with oval root canals?

Favorable residual stress induction by resin-cementation on dental porcelain.

Fluid exudates from inflamed bone-anchored hearing aids demonstrate elevated levels of cytokines and biomarkers of tissue and bone metabolism

Glass ionomer cements with milled, dry chlorhexidine hexametaphosphate filler particles to provide long-term antimicrobial properties with recharge capacity

Improved bonding of zirconia substructures to resin using a "glaze-on" technique

Improving our understanding of metal implant failures: Multiscale chemical imaging of exogenous metals in ex-vivo biological tissues

Improving the standard of the standard for glass ionomers: an alternative to the compressive fracture strength test for consideration?

In Situ Synchrotron X-Ray Diffraction Characterization of Corrosion Products of a Ti-Based Metallic Glass for Implant Applications

In situ measurement of dental resin-based composite volumetric shrinkage and temperature effects using in-fibre bragg grating methods

In vitro bioactivity of titanium-doped bioglass

In-Situ Synchrotron X-ray Characterization of Corrosion Products in Zr Artificial Pits in Simulated Physiological Solutions

Influence of Cobalt Ions on Collagen Gel Formation and Their Interaction with Osteoblasts

Initial fracture resistance and curing temperature rise of ten contemporary resin-based composites with increasing radiant exposure.

Intracoronal stress transfer through enamel following RBC photopolymerisation: A synchrotron X-ray study ⬇️

Laminated ceramics with elastic interfaces: a mechanical advantage?

Lipopolysaccharide inhibits or accelerates biomedical titanium corrosion depending on environmental acidity

Lymphoid aggregates that resemble tertiary lymphoid organs define a specific pathological subset in metal-on-metal hip replacements

Machining variability impacts on the strength of a 'chair-side' CAD-CAM ceramic

Mechanisms of Atomization from Rotary Dental Instruments and Its Mitigation

Origin of micro-scale heterogeneity in polymerisation of photo-activated resin composites

Outcomes of implant-based oral rehabilitation in head and neck oncology patients-a retrospective evaluation of a large, single regional service cohort

Oxygen inhibition and incremental layer bond strengths of resin composites

Paternal low protein diet programs preimplantation embryo gene expression, fetal growth and skeletal development in mice

Quantifying the strength of a resin-coated dental ceramic.

Resin strengthening of dental ceramics—The impact of surface texture and silane

Seating load parameters impact on dental ceramic reinforcement conferred by cementation with resin-cements

Strength determination of brittle materials as curved monolithic structures.

Strength-limiting damage in lithium silicate glass-ceramics associated with CAD-CAM

Surface Finish has a Critical Influence on Biofilm Formation and Mammalian Cell Attachment to Additively Manufactured Prosthetics

Survival of dental implants placed in autogenous bone grafts and bone flaps in head and neck oncology patients: a systematic review

Synchrotron X-ray diffraction and scanning electron microscopy to understand enamel affected by metabolic disorder mucopolysaccharidosis

Synchrotron X-ray diffraction to understand crystallographic texture of enamel affected by Hunter syndrome

Tailoring selective laser melting process for titanium drug-delivering implants with releasing micro-channels

Testing rate and cementation seating load effects on resin-strengthening of a dental porcelain analogue.

The Current Evidence on Retaining or Prosthodontically Replacing Retained Deciduous Teeth in the Adult Hypodontia Patient: A Systematic Review

The crushing truth about glass ionomer restoratives: exposing the standard of the standard

The deformation and strength of a dental ceramic following resin-cement coating.

The design of additively manufactured lattices to increase the functionality of medical implants

The effect of thermocycling on the strength of porcelain laminate veneer (PLV) materials

The impact of endodontic access on the biaxial flexure strength of dentine-bonded crown substrates - anin vitrostudy

The impact of hydrofluoric acid surface treatments on the performance of a porcelain laminate restorative material

The impact of modifying alumina air abrasion parameters on the fracture strength of a porcelain laminate restorative material

The impact of resin-coating on sub-critical crack extension in a porcelain laminate veneer material.

The influence of cement lute, thermocycling and surface preparation on the strength of a porcelain laminate veneering material

The influence of resin flexural modulus on the magnitude of ceramic strengthening

The oral health needs of children, adolescents and young adults affected by a mucopolysaccharide disorder

The strength of sintered and adhesively bonded zirconia/veneer-ceramic bilayers.

TiO2 nanoparticles can selectively bind CXCL8 impacting on neutrophil chemotaxis.

Time-dependent Enhanced Corrosion of Ti6Al4V in the Presence of H2O2 and Albumin.

Titanium phosphate glass microspheres for bone tissue engineering.

Transient and residual stresses in a pressable glass-ceramic before and after resin-cement coating determined using profilometry.

Transient and residual stresses induced during the sintering of two dentin ceramics ⬇️