List of works - Karen P. Hapgood

3D printed agglomerates for granule breakage tests ⬇️

article published in 2017

A field study of lignite as a drying aid in the superheated steam drying of anaerobically digested sludge

scientific article

A method to predict nuclei size distributions for use in models of wet granulation

A quantitative framework for the formation of liquid marbles and hollow granules from hydrophobic powders

A slow release nitrogen fertiliser produced by simultaneous granulation and superheated steam drying of urea with brown coal

An analysis of the thermodynamic conditions for solid powder particles spreading over liquid surface

Application of the unified compaction curve to link wet granulation and tablet compaction behaviour

article by Thanh H. Nguyen et al published May 2013 in Powder Technology

CFD–DEM investigation of particle separations using a sinusoidal jigging profile

Characterisation of liquid marbles in commercial cosmetic products

Dimensionless spray flux in wet granulation: Monte-Carlo simulations and experimental validation

article published in 2004

Direct conversion of two-dimensional ZIF-L film to porous ZnO nano-sheet film and its performance as photoanode in dye-sensitized solar cell

Discrete particle simulation of solid separation in a jigging device

Distribution nucleation: Quantifying liquid distribution on the particle surface using the dimensionless particle coating number

Drop penetration into porous powder beds

scientific article

Drop penetration time in heterogeneous powder beds

Drug agglomeration and dissolution--what is the influence of powder mixing?

scientific article

Drug distribution in wet granulation: foam versus spray

scientific article published on 12 October 2012

Editorial to Chemeca 2010 Special Issue

Effect of formulation hydrophobicity on drug distribution in wet granulation

Experimental study of the deformation and breakage of 3D printed agglomerates: Effects of packing density and inter-particle bond strength ⬇️

Foam and drop penetration kinetics into loosely packed powder beds

Foam granulation: Binder dispersion and nucleation in mixer-granulators

Foam granulation: Effects of formulation and process conditions on granule size distributions

Foam granulation: Liquid penetration or mechanical dispersion?

Formation of hollow granules from liquid marbles: Small scale experiments

Granulation of hydrophobic powders

Improving liquid distribution by reducing dimensionless spray flux in wet granulation—A pharmaceutical manufacturing case study

Influence of coating material on the flowability and dissolution of dry-coated fine ibuprofen powders

scientific article published on 25 July 2015

Investigation of the potential for direct compaction of a fine ibuprofen powder dry-coated with magnesium stearate

scientific article published on 16 April 2014

Lactose microparticle formation from finely atomised droplets

Liquid marble formation: Spreading coefficients or kinetic energy?

Mapping of regimes for the key processes in wet granulation: Foam vs. spray

Ni(OH) 2 decorated rutile TiO 2 for efficient removal of tetracycline from wastewater

article by Sookwan Leong et al published December 2016 in Applied Catalysis B: Environmental

Nucleation regime map for liquid bound granules

article by Karen P. Hapgood et al published February 2003 in AIChE Journal

Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review

article

Observation of the liquid marble morphology using confocal microscopy

article published in 2010

Pharmaceutical dry powder blending and scale-up: Maintaining equivalent mixing conditions using a coloured tracer powder

article by David Barling et al published January 2015 in Powder Technology

Pharmaceutical particles

Predicting Tablet Strength from the Wet Granulation Conditions via the Unified Compaction Curve

article by Thanh H. Nguyen et al published 2015 in Procedia Engineering

Preparation of supported photocatalytic membrane from mesoporous titania spheres for humic acid removal from wastewater

article by Sookwan Leong et al published 20 March 2016 in Asia-Pacific Journal of Chemical Engineering

Producing hollow granules from hydrophobic powders in high-shear mixer granulators

Rewetting effects and droplet motion on partially wetted powder surfaces

Single-step Coprocessing of Cohesive Powder via Mechanical Dry Coating for Direct Tablet Compression

scientific article published on 21 September 2016

Spontaneous ethanol–water emulsification as a precursor for porous particle formation: Understanding the role of dissolved carbohydrates

article by P.L. Xiao et al published June 2019 in Particuology: science and technology of particles

Steady states in granulation of pharmaceutical powders with application to scale-up

Stress measurements in high-shear granulators using calibrated “test” particles: application to scale-up

The Environmental footprint of morphine: a life cycle assessment from opium poppy farming to the packaged drug

scientific article

The academic jungle: ecosystem modelling reveals why women are driven out of research

scientific article published in 2012

TiO2 based photocatalytic membranes: A review

article

Understanding and preventing agglomeration in a filter drying process

Unified compaction curve model for tensile strength of tablets made by roller compaction and direct compression

scientific article published on 22 June 2007

Unveiling the mechanism of antisolvent vapour precipitation in producing ultrafine spherical particles

article published in 2015

List of works by Karen P. Hapgood

3D printed agglomerates for granule breakage tests ⬇️

A field study of lignite as a drying aid in the superheated steam drying of anaerobically digested sludge

A method to predict nuclei size distributions for use in models of wet granulation

A quantitative framework for the formation of liquid marbles and hollow granules from hydrophobic powders

A slow release nitrogen fertiliser produced by simultaneous granulation and superheated steam drying of urea with brown coal

An analysis of the thermodynamic conditions for solid powder particles spreading over liquid surface

Application of the unified compaction curve to link wet granulation and tablet compaction behaviour

CFD–DEM investigation of particle separations using a sinusoidal jigging profile

Characterisation of liquid marbles in commercial cosmetic products

Dimensionless spray flux in wet granulation: Monte-Carlo simulations and experimental validation

Direct conversion of two-dimensional ZIF-L film to porous ZnO nano-sheet film and its performance as photoanode in dye-sensitized solar cell

Discrete particle simulation of solid separation in a jigging device

Distribution nucleation: Quantifying liquid distribution on the particle surface using the dimensionless particle coating number

Drop penetration into porous powder beds

Drop penetration time in heterogeneous powder beds

Drug agglomeration and dissolution--what is the influence of powder mixing?

Drug distribution in wet granulation: foam versus spray

Editorial to Chemeca 2010 Special Issue

Effect of formulation hydrophobicity on drug distribution in wet granulation

Experimental study of the deformation and breakage of 3D printed agglomerates: Effects of packing density and inter-particle bond strength ⬇️

Foam and drop penetration kinetics into loosely packed powder beds

Foam granulation: Binder dispersion and nucleation in mixer-granulators

Foam granulation: Effects of formulation and process conditions on granule size distributions

Foam granulation: Liquid penetration or mechanical dispersion?

Formation of hollow granules from liquid marbles: Small scale experiments

Granulation of hydrophobic powders

Improving liquid distribution by reducing dimensionless spray flux in wet granulation—A pharmaceutical manufacturing case study

Influence of coating material on the flowability and dissolution of dry-coated fine ibuprofen powders

Investigation of the potential for direct compaction of a fine ibuprofen powder dry-coated with magnesium stearate

Lactose microparticle formation from finely atomised droplets

Liquid marble formation: Spreading coefficients or kinetic energy?

Mapping of regimes for the key processes in wet granulation: Foam vs. spray

Ni(OH) 2 decorated rutile TiO 2 for efficient removal of tetracycline from wastewater

Nucleation regime map for liquid bound granules

Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review

Observation of the liquid marble morphology using confocal microscopy

Pharmaceutical dry powder blending and scale-up: Maintaining equivalent mixing conditions using a coloured tracer powder

Pharmaceutical particles

Predicting Tablet Strength from the Wet Granulation Conditions via the Unified Compaction Curve

Preparation of supported photocatalytic membrane from mesoporous titania spheres for humic acid removal from wastewater

Producing hollow granules from hydrophobic powders in high-shear mixer granulators

Rewetting effects and droplet motion on partially wetted powder surfaces

Single-step Coprocessing of Cohesive Powder via Mechanical Dry Coating for Direct Tablet Compression

Spontaneous ethanol–water emulsification as a precursor for porous particle formation: Understanding the role of dissolved carbohydrates

Steady states in granulation of pharmaceutical powders with application to scale-up

Stress measurements in high-shear granulators using calibrated “test” particles: application to scale-up

The Environmental footprint of morphine: a life cycle assessment from opium poppy farming to the packaged drug

The academic jungle: ecosystem modelling reveals why women are driven out of research

TiO2 based photocatalytic membranes: A review

Understanding and preventing agglomeration in a filter drying process

Unified compaction curve model for tensile strength of tablets made by roller compaction and direct compression

Unveiling the mechanism of antisolvent vapour precipitation in producing ultrafine spherical particles

Wet Granulation Processes

Wet Granulation and Mixing