List of works - Bert Pluymers

A Digital Twin for Operational Evaluation of Vertical Transportation Systems

scientific article

A Hybrid Wave Based - Modally Reduced Finite Element Method for the Efficient Analysis of Low- and Mid-frequency Car Cavity Acoustics

scholarly article published 19 May 2009

A Trefftz based method for solving Helmholtz problems in semi-infinite domains

scientific article

A Wave Based Prediction Technique for the Dynamic Response Analysis of Plates with Random Point Mass Distributions

A hierarchical quantification of inter- & intra-batch vibro-acoustic variability of deep drawn parts

A hybrid Boundary Element-Wave Based Method for an efficient solution of bounded acoustic problems with inclusions

scientific article

A lightweight vibro-acoustic metamaterial demonstrator: Numerical and experimental investigation

scientific article

A modified complex modal testing technique for a rotating tire with a flexible ring model

scientific article

A parametric model order reduction technique for inverse viscoelastic material identification

scientific article

A study of vibro-acoustic behaviour variation of thin sheet metal components manufactured through deep drawing process

scientific article

A synthesis procedure for pass-by noise of automotive vehicles employing numerically evaluated source–receiver transfer functions

scientific article

Acoustic impedance sensitivity approach for defining absorbing material layout using the wave based method

scientific article

Active control of turbulent boundary layer sound transmission into a vehicle interior

scientific article

Active control of turbulent boundary layer-induced sound transmission through the cavity-backed double panels

scientific article

Adaptive model reduction technique for large-scale dynamical systems with frequency-dependent damping

scientific article

An efficient Wave Based Method for solving Helmholtz problems in three-dimensional bounded domains

scientific article

Analytic Formula Derivation for a Rolling Tire with a Ring Model

scientific article

Analytical solution for free vibrations of rotating cylindrical shells having free boundary conditions

article

Application of Energy Flow Analysis Focused on Path Visualization into Vehicle Design

Application of an efficient wave-based prediction technique for the analysis of vibro-acoustic radiation problems

Application of state estimation to the monitoring of multiple components in non-linear electro-mechanical systems

article by M. González et al published September 2020 in Applied Acoustics

Characterization and Modeling of the Viscoelastic Behavior of a Self-Adhesive Rubber Using Dynamic Mechanical Analysis Tests

scientific article

Coupling of Boundary Element and Wave Based Methods for the efficient solution of complex multiple scattering problems

scientific article

DAMPING ANALYSIS WITH RESPECT TO ROLLING SPEED BY ANALYTIC SOLUTION OF A FLEXIBLE RING MODEL AND ITS FREQUENCY RESPONSE FUNCTION DERIVATION BY MODAL SUMMATION METHOD

scientific article

Design and experimental validation of a metamaterial solution for improved noise and vibration behavior of pipes

scientific article

Design sensitivity analysis and optimization of frequency averaged input power using the residue theorem

scientific article

Development of Multi-Actuated Ground Vehicles: Educational aspects

article

Development of an innovative noise generation system for turboprop aircraft fuselage testing

Dynamic Behavior of Bearings on Offshore Wind Turbine Gearboxes

scientific article

Dynamic Metamaterials for Structural Stopband Creation

scientific article

Enhanced Lightweight Design – First Results of the FP7 Project ENLIGHT

scientific article

Equivalent force modeling of macro fiber composite actuators integrated into non-homogeneous composite plates for dynamic applications

scientific article

Experimental Characterization of Drag Torque in Open Multi-Disks Wet Clutches

scientific article

Experimental validation of numerical structural dynamic models for metal plate joining techniques

scientific article

Experimental validation of the wave based prediction technique for the analysis of the coupled vibro-acoustic behavior of a 3D cavity

Fast approximation of synthesized frequency response functions with automated multi-level substructuring (AMLS)

scientific article

Finite element approach for simulating the dynamic mechanical behaviour of a chicken egg

Force Isolation by Locally Resonant Metamaterials to Reduce NVH

scientific article

Frictional power loss in solid-grease-lubricated needle roller bearing

scientific article

Global optimisation methods for poroelastic material characterisation using a clamped sample in a Kundt tube setup

scientific article

H 2 optimal vibration control using inertial actuators and a comparison with tuned mass dampers

scientific article

High-Speed Camera based Experimental Modal Analysis for Dynamic Testing of an Automotive Coil Spring

Identification of the direction and value of the wave length of each mode for a rotating tire using the phase difference method

scientific article

Incommensurate vibro-acoustic performance due to in-process blank holder force variation during deep drawing process

scientific article

Interference effects in phased beam tracing using exact half-space solutions

scientific article published in December 2016

Investigation of thermal effects on the steady-state vibrations of a rectangular plate–cavity system subjected to harmonic loading and static temperature loads using a Wave Based Method

scientific article

K-space analysis of complex large-scale meta-structures using the Inhomogeneous Wave Correlation method

scientific article

Locally Resonant Metamaterial Patches on Rear Shock Towers of a Vehicle to Reduce Structure‑Borne Road Noise: Numerical and Experimental Performance Validation

scientific article

Loose bolt detection in a complex assembly using a vibro-acoustic sensor array

scientific article

Low frequency tyre noise mitigation in a vehicle using metal 3D printed resonant metamaterials

Mathematical Model and Experimental Evaluation of Drag Torque in Disengaged Wet Clutches

article

Mid-Frequency Methods in Sound and Vibration—Part A

scientific article

Mid-Frequency Methods in Sound and Vibration—Part B

scientific article

Model for Predicting Drag Torque in Open Multi-Disks Wet Clutches

scientific article

Model-Based State Estimation for the Diagnosis of Multiple Faults in Non-linear Electro-Mechanical Systems

scientific article

Model-based condition monitoring of guiding rails in electro-mechanical systems

scientific article

Model-based, multi-material topology optimization taking into account cost and manufacturability

scientific article

Modeling and analysis of wet friction clutch engagement dynamics

scientific article

Non-destructive structural integrity testing of finite plates based on the wave scattering at defects with sub-wavelength size

scientific article

Non-destructive testing based on vibrations in the low to mid-frequency range

scientific article

Numerical Comparison of Different Equivalent Source Models and Source Quantification Techniques for Use in Sound Synthesis Systems

scientific article

OWT Drivetrain & Gearbox Simulation and Testing

scientific article

On the influence of frequency-dependent elastic properties in vibro-acoustic modelling of porous materials under structural excitation

scientific article

Optimal dynamic vibration absorber design for minimizing the band-averaged input power using the residue theorem

scientific article

Reconstruction of the in-plane mode shape of a rotating tire with a continuous scanning measurement using the Hilbert-Huang transform

scientific article published on 01 February 2015

Reducing Vehicle Interior NVH by Means of Locally Resonant Metamaterial Patches on Rear Shock Towers

scientific article

Reverberation time and audibility in phased geometrical acoustics using plane or spherical wave reflection coefficients

scientific article published on 01 April 2019

Self-Tuneable Velocity Feedback for Active Isolation of Random Vibrations in Subcritical Two Degree Of Freedom Systems

scientific article

Structure-preserving low-order modeling approach of laminated composite plates integrated with macro-fiber composite transducers for dynamic applications

scientific article

Subcomponent modelling of input parameters for statistical energy analysis by using a wave-based boundary condition

Synthesis of Drive-by Noise Based on Numerically Evaluated Source-Receiver Transfer Functions Employing the FMBEM

scientific article

The design of Helmholtz resonator based acoustic lenses by using the symmetric Multi-Level Wave Based Method and genetic algorithms

scientific article

The dynamic bending analysis of plates under thermal load using an efficient wave-based method

article published in 2020

The wave based method: An overview of 15 years of research

scientific article

The wave-based substructuring approach for the efficient description of interface dynamics in substructuring

Trefftz-Based Methods for Time-Harmonic Acoustics

VIBRATION ATTENUATION IN PIPES: DESIGN AND EXPERIMENTAL VALIDATION OF A RESONANT METAMATERIAL SOLUTION

scientific article

Validating the modeling of sandwich structures with constrained layer damping using fractional derivative models

scientific article

Vibro-Acoustic Characterisation of Lightweight Structures: A Numerical-Experimental Approach

scientific article

Vibro-Acoustic Metamaterials for Improved Interior NVH Performance in Vehicles

scientific article

Vibro-acoustic analysis procedures for the evaluation of the sound insulation characteristics of agricultural machinery cabins

Vibro-acoustic design sensitivity analysis using the wave-based method

Vibro-acoustic modeling and validation using viscoelastic material

scientific article

Virtual Sensing for Rotordynamics

scientific article

Wave propagation in locally resonant cylindrically curved metamaterial panels

scientific article

Wind turbine drivetrains: state-of-the-art technologies and future development trends

scientific article

List of works by Bert Pluymers

A Digital Twin for Operational Evaluation of Vertical Transportation Systems

A Hybrid Wave Based - Modally Reduced Finite Element Method for the Efficient Analysis of Low- and Mid-frequency Car Cavity Acoustics

A Trefftz based method for solving Helmholtz problems in semi-infinite domains

A Wave Based Prediction Technique for the Dynamic Response Analysis of Plates with Random Point Mass Distributions

A hierarchical quantification of inter- & intra-batch vibro-acoustic variability of deep drawn parts

A hybrid Boundary Element-Wave Based Method for an efficient solution of bounded acoustic problems with inclusions

A lightweight vibro-acoustic metamaterial demonstrator: Numerical and experimental investigation

A modified complex modal testing technique for a rotating tire with a flexible ring model

A parametric model order reduction technique for inverse viscoelastic material identification

A study of vibro-acoustic behaviour variation of thin sheet metal components manufactured through deep drawing process

A synthesis procedure for pass-by noise of automotive vehicles employing numerically evaluated source–receiver transfer functions

Acoustic impedance sensitivity approach for defining absorbing material layout using the wave based method

Active control of turbulent boundary layer sound transmission into a vehicle interior

Active control of turbulent boundary layer-induced sound transmission through the cavity-backed double panels

Adaptive model reduction technique for large-scale dynamical systems with frequency-dependent damping

An efficient Wave Based Method for solving Helmholtz problems in three-dimensional bounded domains

Analytic Formula Derivation for a Rolling Tire with a Ring Model

Analytical solution for free vibrations of rotating cylindrical shells having free boundary conditions

Application of Energy Flow Analysis Focused on Path Visualization into Vehicle Design

Application of an efficient wave-based prediction technique for the analysis of vibro-acoustic radiation problems

Application of state estimation to the monitoring of multiple components in non-linear electro-mechanical systems

Characterization and Modeling of the Viscoelastic Behavior of a Self-Adhesive Rubber Using Dynamic Mechanical Analysis Tests

Coupling of Boundary Element and Wave Based Methods for the efficient solution of complex multiple scattering problems

DAMPING ANALYSIS WITH RESPECT TO ROLLING SPEED BY ANALYTIC SOLUTION OF A FLEXIBLE RING MODEL AND ITS FREQUENCY RESPONSE FUNCTION DERIVATION BY MODAL SUMMATION METHOD

Design and experimental validation of a metamaterial solution for improved noise and vibration behavior of pipes

Design sensitivity analysis and optimization of frequency averaged input power using the residue theorem

Development of Multi-Actuated Ground Vehicles: Educational aspects

Development of an innovative noise generation system for turboprop aircraft fuselage testing

Dynamic Behavior of Bearings on Offshore Wind Turbine Gearboxes

Dynamic Metamaterials for Structural Stopband Creation

Enhanced Lightweight Design – First Results of the FP7 Project ENLIGHT

Equivalent force modeling of macro fiber composite actuators integrated into non-homogeneous composite plates for dynamic applications

Experimental Characterization of Drag Torque in Open Multi-Disks Wet Clutches

Experimental validation of numerical structural dynamic models for metal plate joining techniques

Experimental validation of the wave based prediction technique for the analysis of the coupled vibro-acoustic behavior of a 3D cavity

Fast approximation of synthesized frequency response functions with automated multi-level substructuring (AMLS)

Finite element approach for simulating the dynamic mechanical behaviour of a chicken egg

Force Isolation by Locally Resonant Metamaterials to Reduce NVH

Frictional power loss in solid-grease-lubricated needle roller bearing

Global optimisation methods for poroelastic material characterisation using a clamped sample in a Kundt tube setup

H 2 optimal vibration control using inertial actuators and a comparison with tuned mass dampers

High-Speed Camera based Experimental Modal Analysis for Dynamic Testing of an Automotive Coil Spring

Identification of the direction and value of the wave length of each mode for a rotating tire using the phase difference method

Incommensurate vibro-acoustic performance due to in-process blank holder force variation during deep drawing process

Interference effects in phased beam tracing using exact half-space solutions

Investigation of thermal effects on the steady-state vibrations of a rectangular plate–cavity system subjected to harmonic loading and static temperature loads using a Wave Based Method

K-space analysis of complex large-scale meta-structures using the Inhomogeneous Wave Correlation method

Locally Resonant Metamaterial Patches on Rear Shock Towers of a Vehicle to Reduce Structure‑Borne Road Noise: Numerical and Experimental Performance Validation

Loose bolt detection in a complex assembly using a vibro-acoustic sensor array

Low frequency tyre noise mitigation in a vehicle using metal 3D printed resonant metamaterials

Mathematical Model and Experimental Evaluation of Drag Torque in Disengaged Wet Clutches

Mid-Frequency Methods in Sound and Vibration—Part A

Mid-Frequency Methods in Sound and Vibration—Part B

Model for Predicting Drag Torque in Open Multi-Disks Wet Clutches

Model-Based State Estimation for the Diagnosis of Multiple Faults in Non-linear Electro-Mechanical Systems

Model-based condition monitoring of guiding rails in electro-mechanical systems

Model-based, multi-material topology optimization taking into account cost and manufacturability

Modeling and analysis of wet friction clutch engagement dynamics

Non-destructive structural integrity testing of finite plates based on the wave scattering at defects with sub-wavelength size

Non-destructive testing based on vibrations in the low to mid-frequency range

Numerical Comparison of Different Equivalent Source Models and Source Quantification Techniques for Use in Sound Synthesis Systems

OWT Drivetrain & Gearbox Simulation and Testing

On the influence of frequency-dependent elastic properties in vibro-acoustic modelling of porous materials under structural excitation

Optimal dynamic vibration absorber design for minimizing the band-averaged input power using the residue theorem

Reconstruction of the in-plane mode shape of a rotating tire with a continuous scanning measurement using the Hilbert-Huang transform

Reducing Vehicle Interior NVH by Means of Locally Resonant Metamaterial Patches on Rear Shock Towers

Reverberation time and audibility in phased geometrical acoustics using plane or spherical wave reflection coefficients

Self-Tuneable Velocity Feedback for Active Isolation of Random Vibrations in Subcritical Two Degree Of Freedom Systems

Structure-preserving low-order modeling approach of laminated composite plates integrated with macro-fiber composite transducers for dynamic applications

Subcomponent modelling of input parameters for statistical energy analysis by using a wave-based boundary condition

Synthesis of Drive-by Noise Based on Numerically Evaluated Source-Receiver Transfer Functions Employing the FMBEM

The design of Helmholtz resonator based acoustic lenses by using the symmetric Multi-Level Wave Based Method and genetic algorithms

The dynamic bending analysis of plates under thermal load using an efficient wave-based method

The wave based method: An overview of 15 years of research

The wave-based substructuring approach for the efficient description of interface dynamics in substructuring

Trefftz-Based Methods for Time-Harmonic Acoustics

VIBRATION ATTENUATION IN PIPES: DESIGN AND EXPERIMENTAL VALIDATION OF A RESONANT METAMATERIAL SOLUTION

Validating the modeling of sandwich structures with constrained layer damping using fractional derivative models

Vibro-Acoustic Characterisation of Lightweight Structures: A Numerical-Experimental Approach