A New Approach for Studying Cavitation in Lubrication

A cavitation algorithm for arbitrary lubricant compressibility

A comparison between computational fluid dynamic and Reynolds approaches for simulating transient EHL line contacts

A mixed lubrication model incorporating measured surface topography. Part 1: Theory of flow factors

A mixed lubrication model incorporating measured surface topography. Part 2: Roughness treatment, model validation, and simulation

A numerical model to investigate the effect of honing angle on the hydrodynamic lubrication between a combustion engine piston ring and cylinder liner

A semi-deterministic texture-roughness model of the piston ring–cylinder liner contact

A two scale mixed lubrication wearing-in model, applied to hydraulic motors

A wear model for EHL contacts in gerotor type hydraulic motors

An Enhanced Stochastic Two-Scale Model for Metal-to-Metal Seals

An experimental and numerical investigation of frictional losses and film thickness for four cylinder liner variants for a heavy duty diesel engine

Application of topological optimisation methodology to finitely wide slider bearings operating under incompressible flow

scientific article

Application of topological optimisation methodology to hydrodynamic thrust bearings

scientific article

Application of topological optimisation methodology to infinitely wide slider bearings operating under compressible flow

scientific article

Characterisation of the Contact between Cross-Country Skis and Snow: A Macro-Scale Investigation of the Apparent Contact

scientific article published on 26 October 2022

Discussion

Editorial ⬇️

February 2014 column in Tribology - Materials, Surfaces & Interfaces

Experimental and numerical investigations of oil film formation and friction in a piston ring–liner contact

Fundamentals of Physics-Informed Neural Networks Applied to Solve the Reynolds Boundary Value Problem

scientific article

Fundamentals of Physics-Informed Neural Networks Applied to Solve the Reynolds Boundary Value Problem

Homogenization of a Reynolds equation describing compressible flow

article by Andreas Almqvist et al published June 2012 in Journal of Mathematical Analysis and Applications

Homogenization of the Reynolds Equation Governing Hydrodynamic Flow in a Rotating Device

Homogenization of the unstationary incompressible Reynolds equation

Interfacial separation between elastic solids with randomly rough surfaces: Comparison between theory and numerical techniques

Low degree of freedom approach for predicting friction in elastohydrodynamically lubricated contacts

Modeling and simulation in tribology across scales: An overview

Multiscale homogenization of a class of nonlinear equations with applications in lubrication theory and applications

New concepts of homogenization applied in rough surface hydrodynamic lubrication

Numerical Simulation of Static Seal Contact Mechanics Including Hydrostatic Load at the Contacting Interface

scientific article

Numerical simulation of a wear experiment

On lower-dimensional models in lubrication, Part A: Common misinterpretations and incorrect usage of the Reynolds equation

scientific article

On lower-dimensional models in lubrication, Part B: Derivation of a Reynolds type of equation for incompressible piezo-viscous fluids

scientific article

On the dry elasto-plastic contact of nominally flat surfaces

On the influence of surface roughness on real area of contact in normal, dry, friction free, rough contact by using a neural network

Reiterated homogenization applied in hydrodynamic lubrication

Rough surface flow factors in full film lubrication based on a homogenization technique

Selected papers from those presented at the 3rd International Tribology Symposium of IFToMM

Semi-deterministic chemo-mechanical model of boundary lubrication

scientific article published on 01 January 2012

Similarities and Differences Between the Flow Factor Method by Patir and Cheng and Homogenization

article published in 2011

The effect of three-dimensional deformations of a cylinder liner on the tribological performance of a piston ring–cylinder liner system

The homogenization process of the Reynolds equation describing compressible liquid flow

article by Andreas Almqvist & J. Dasht published September 2006 in Tribology International

The influence of AFM and VSI techniques on the accurate calculation of tribological surface roughness parameters

The influence of surface roughness on friction in a flexible hybrid bearing

Thermal Turbulent Flow in Leading Edge Grooved and Conventional Tilting Pad Journal Bearing Segments—A Comparative Study

Variational bounds applied to unstationary hydrodynamic lubrication