List of works - Xin Lin

Achieving superior ductility for laser solid formed extra low interstitial Ti-6Al-4V titanium alloy through equiaxial alpha microstructure

scholarly article by Zhuang Zhao et al published March 2018 in Scripta Materialia

Calculation of solid–liquid interfacial free energy of Cu by two different methods

Cellular Automaton Simulation of the Growth of Anomalous Eutectic during Laser Remelting Process

scientific article published on 27 September 2018

Distinction in Anodic Dissolution Behavior of Inconel 718 Prepared by Different Forming Technologies

Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming

Effects of processing defects on the dynamic tensile mechanical behavior of laser-solid-formed Ti-6Al-4 V

Electricity-induced switchable wettability and controllable water permeation based on 3D copper foam

scientific article published on 01 November 2015

Electrochemical behavior of Inconel 718 fabricated by laser solid forming on different sections

Electrochemical behaviour of laser solid formed Ti–6Al–4V alloy in a highly concentrated NaCl solution

Evaluation of mechanical properties and porcelain bonded strength of nickel-chromium dental alloy fabricated by laser rapid forming

scientific article published on 23 June 2009

First-principles study of the relaxation and energy of bcc-Fe, fcc-Fe and AISI-304 stainless steel surfaces

article published in 2009

Glass forming ability and crystallization behavior of Al–Ni–RE metallic glasses

Grain morphology evolution and texture characterization of wire and arc additive manufactured Ti-6Al-4V

In situ measurements and thermo-mechanical simulation of Ti–6Al–4V laser solid forming processes

In situ observation the interface undercooling of freezing colloidal suspensions with differential visualization method

scientific article published in August 2015

In-situ synthesis of aluminum/nano-quasicrystalline Al-Fe-Cr composite by using selective laser melting

scholarly article by N. Kang et al published December 2018 in Composites Part B: Engineering

Influence of powder size on the crystallization behavior during laser solid forming Zr 55 Cu 30 Al 10 Ni 5 bulk amorphous alloy

Inhibition of extracellular signal-regulated kinase activity by sorafenib increases sensitivity to DNR in K562 cells.

scientific article published on 6 March 2013

Interactions between Nanoparticles and Polymers in the Diffusion Boundary Layer during Freezing Colloidal Suspensions

scientific article published on 24 July 2019

Interface instability modes in freezing colloidal suspensions: revealed from onset of planar instability.

scientific article

Interfacial undercooling in solidification of colloidal suspensions: analyses with quantitative measurements

scientific article

Microstructural analysis of Zr55Cu30Al10Ni5 bulk metallic glasses by laser surface remelting and laser solid forming

Microstructure and Tribological Properties of Laser Forming Repaired 34CrNiMo6 Steel

scientific article published on 14 September 2018

Microstructure and mechanical properties of Ti-2Al alloyed with Mo formed in laser additive manufacture

Microstructure and tensile properties of Ti-Mo alloys manufactured via using laser powder bed fusion

Microstructures and mechanical properties of vacuum counter-pressure casting A357 alloys solidified under grade-pressurising: effects of melt temperature

Microstructures and stress rupture properties of pulse laser repaired Inconel 718 superalloy after different heat treatments

Nd-induced honeycomb structure of intermetallic phase enhances the corrosion resistance of Mg alloys for bone implants.

scientific article published on 20 July 2017

Optimization of wire feed for GTAW based additive manufacturing

Preparation and characterization of laser-melted Mg-Sn-Zn alloys for biomedical application.

scientific article

Process mechanisms based on powder flow spatial distribution in direct metal deposition

Quantitative cellular automaton model and simulations of dendritic and anomalous eutectic growth

Residual stress and distortion of rectangular and S-shaped Ti-6Al-4V parts by Directed Energy Deposition: Modelling and experimental calibration

Settling velocity of equiaxed dendrites in a tube

Solidification behavior and morphological evolution in laser surface forming of AlCoCrCuFeNi multi-layer high-entropy alloy coatings on AZ91D

The failure mechanism of 50% laser additive manufactured Inconel 718 and the deformation behavior of Laves phases during a tensile process

scientific article published on 11 January 2017

The research progress in mechanism and influence of biosorption between lactic acid bacteria and Pb(II): A review.

scientific article published on 8 September 2017

Three-dimensional reconstruction of anomalous eutectic in laser remelted Ni-30 wt.% Sn alloy

scientific article

List of works by Xin Lin

Achieving superior ductility for laser solid formed extra low interstitial Ti-6Al-4V titanium alloy through equiaxial alpha microstructure

Calculation of solid–liquid interfacial free energy of Cu by two different methods

Cellular Automaton Simulation of the Growth of Anomalous Eutectic during Laser Remelting Process

Distinction in Anodic Dissolution Behavior of Inconel 718 Prepared by Different Forming Technologies

Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming

Effects of processing defects on the dynamic tensile mechanical behavior of laser-solid-formed Ti-6Al-4 V

Electricity-induced switchable wettability and controllable water permeation based on 3D copper foam

Electrochemical behavior of Inconel 718 fabricated by laser solid forming on different sections

Electrochemical behaviour of laser solid formed Ti–6Al–4V alloy in a highly concentrated NaCl solution

Evaluation of mechanical properties and porcelain bonded strength of nickel-chromium dental alloy fabricated by laser rapid forming

First-principles study of the relaxation and energy of bcc-Fe, fcc-Fe and AISI-304 stainless steel surfaces

Glass forming ability and crystallization behavior of Al–Ni–RE metallic glasses

Grain morphology evolution and texture characterization of wire and arc additive manufactured Ti-6Al-4V

In situ measurements and thermo-mechanical simulation of Ti–6Al–4V laser solid forming processes

In situ observation the interface undercooling of freezing colloidal suspensions with differential visualization method

In-situ synthesis of aluminum/nano-quasicrystalline Al-Fe-Cr composite by using selective laser melting

Influence of powder size on the crystallization behavior during laser solid forming Zr 55 Cu 30 Al 10 Ni 5 bulk amorphous alloy

Inhibition of extracellular signal-regulated kinase activity by sorafenib increases sensitivity to DNR in K562 cells.

Interactions between Nanoparticles and Polymers in the Diffusion Boundary Layer during Freezing Colloidal Suspensions

Interface instability modes in freezing colloidal suspensions: revealed from onset of planar instability.

Interfacial undercooling in solidification of colloidal suspensions: analyses with quantitative measurements

Microstructural analysis of Zr55Cu30Al10Ni5 bulk metallic glasses by laser surface remelting and laser solid forming

Microstructure and Tribological Properties of Laser Forming Repaired 34CrNiMo6 Steel

Microstructure and mechanical properties of Ti-2Al alloyed with Mo formed in laser additive manufacture

Microstructure and tensile properties of Ti-Mo alloys manufactured via using laser powder bed fusion

Microstructures and mechanical properties of vacuum counter-pressure casting A357 alloys solidified under grade-pressurising: effects of melt temperature

Microstructures and stress rupture properties of pulse laser repaired Inconel 718 superalloy after different heat treatments

Nd-induced honeycomb structure of intermetallic phase enhances the corrosion resistance of Mg alloys for bone implants.

Optimization of wire feed for GTAW based additive manufacturing

Preparation and characterization of laser-melted Mg-Sn-Zn alloys for biomedical application.

Process mechanisms based on powder flow spatial distribution in direct metal deposition

Quantitative cellular automaton model and simulations of dendritic and anomalous eutectic growth

Residual stress and distortion of rectangular and S-shaped Ti-6Al-4V parts by Directed Energy Deposition: Modelling and experimental calibration

Settling velocity of equiaxed dendrites in a tube

Solidification behavior and morphological evolution in laser surface forming of AlCoCrCuFeNi multi-layer high-entropy alloy coatings on AZ91D

The failure mechanism of 50% laser additive manufactured Inconel 718 and the deformation behavior of Laves phases during a tensile process

The research progress in mechanism and influence of biosorption between lactic acid bacteria and Pb(II): A review.

Three-dimensional reconstruction of anomalous eutectic in laser remelted Ni-30 wt.% Sn alloy

Effects of processing defects on the dynamic tensile mechanical behavior of laser-solid-formed Ti-6Al-4 V