Assessment of scanning spreading resistance microscopy for application to n-type GaN

Assessment of the performance of scanning capacitance microscopy for n-type gallium nitride

scholarly article by Joy Sumner et al published 2008 in Journal of Vacuum Science & Technology B

Calibration and Applications of Scanning Capacitance Microscopy: n-Type GaN

Cautionary note on use of focused ion beam sectioning as technique for characterising oxidation damage in Ni based superalloys

Chemical and Physical Analysis of Acetate-Oxide Sol-Gel Processing Routes for the Y-Ba-Cu-O System

Compositional contrast in AlxGa1−xN/GaN heterostructures using scanning spreading resistance microscopy

article

Corrosion fatigue testing: the combined effect of stress and high temperature corrosion

article

Effect of stress state and simultaneous hot corrosion on the crack propagation and fatigue life of single crystal superalloy CMSX-4

article

Fireside issues in advanced power generation systems

High temperature oxidation and corrosion of gas turbine component materials in burner rig exposures

High temperature oxidation and corrosion of gas turbine materials in burner rig exposures

Highlighting threading dislocations in MOVPE-grown GaN using an in situ treatment with SiH4 and NH3

article

Hot corrosion resistance of gas turbine materials in combusted syngas environments

Impact of Deposit Recoat Cycle Length on Hot Corrosion of CMSX-4

Impacts of temperature and surface finish upon steam oxidation of austenitic steel TP347HFG

Interaction of hot corrosion fatigue and load dwell periods on a nickel-base single crystal superalloy

article

Kinetics of Duplex Oxide Growth on 9Cr Steels Exposed in CO2: Application of Dimensional Metrology

scholarly article by Joy Sumner et al published 5 April 2017 in Oxidation of Metals

Lifetime prediction for gas turbine materials in power generation

Modeling gas turbine materials’ hot corrosion degradation in combustion environments from H2-rich syngas

Morphological changes of InGaN epilayers during annealing assessed by spectral analysis of atomic force microscopy images

New Technique to Map Hot Corrosion Damage: CMSX-4 Example

Oxidation Behaviour of NiCrAl and NiCoCrAl Bond Coatings Under Industrial Gas Turbine Conditions

Performance of thermal barrier coatings in industrial gas turbine conditions

Practical issues in carrier-contrast imaging of GaN structures

Scanning capacitance microscopy as a tool for the assessment of unintentional doping in GaN

Scanning capacitance microscopy studies of GaN grown by epitaxial layer overgrowth

Scanning capacitance microscopy studies of unintentional doping in epitaxial lateral overgrowth GaN

SiH4 exposure of GaN surfaces: A useful tool for highlighting dislocations

Simulating novel gas turbine conditions for materials assessment: cascade design and operation

Stress corrosion of Ni-based superalloys

Subsea Processing in Remote Marginal Fields

The Use of APS Thermal Barrier Coatings in Corrosive Environments

The development of new bond coat compositions for thermal barrier coating systems operating under industrial gas turbine conditions

article

The influence of coalescence time on unintentional doping in GaN/sapphire

The origin and reduction of dislocations in Gallium Nitride

scholarly article by Rachel Angharad Oliver et al published 5 March 2008 in Journal of Materials Science: Materials in Electronics

The role of superalloy precipitates on the early stages of oxidation and type II hot corrosion

Type II Hot Corrosion: Kinetics Studies of CMSX-4

Type II hot corrosion: Behavior of CMSX-4 and IN738LC as a function of corrosion environment

Unintentional doping in GaN assessed by scanning capacitance microscopy