Search filters

List of works by Tomasz Dudziak

Air oxidation behaviour of standard PVD and novel HIPIMS coatings at 750°C for 1000 h

Characterisation of oxide scales developed on high temperature resistant alloys in pure steam environments

Defects of SiC nanowires studied by STM and STS

Effect of Steam Flow Rate and Sample Orientation on Steam Oxidation of Ferritic and Austenitic Steels at 650 and 700 °C

Effect of ceramic‐based coatings deposited on low‐alloyed steel T/P22 10H2M exposed at high temperature

scientific article published on 2 February 2021

Enhanced sulphidation/oxidation resistance of Ti-45Al-8Nb alloy by nanostructured CrAlYN/CrN coatings at 750 °C

Fireside Corrosion Behavior of HVOF and Plasma-Sprayed Coatings in Advanced Coal/Biomass Co-Fired Power Plants

article

Fireside corrosion degradation of 15Mo3, T22, T23 & T91 in simulated coal-biomass co-fired environment

Fireside corrosion degradation of ferritic alloys at 600°C in oxy-fired conditions

High Temperature Oxidation Resistance of CrAlYN-Coated Ti45Al8Nb

Long exposure test in air, conducted on super-lattice coatings at 850°C for 4,000 hours

Long-term oxidation of newly developed HIPIMS and PVD coatings with neural network prediction modelling

Paper: Effect of aging process on steam oxidation behaviour of austenitic steels Super 304H and HR3C

scientific article published in June 2021

Phase Investigations Under Steam Oxidation Process at 800 °C for 1000 h of Advanced Steels and Ni-Based Alloys

Preliminary Studies on Rare Elements Addition and Effect on Oxidation Behaviour of Pack Cementation Coatings Deposited on Variety of Steels at High Temperature

scientific article published on 11 November 2021

Scale mass gain, morphology and phase composition of air and steam oxidized electron beam melted and cast Ti–48Al–2Nb-0.7Cr-0.3Si alloys

scientific article published in June 2022

Steam Oxidation Resistance of Advanced Steels and Ni-Based Alloys at 700 °C for 1000 h

article

Steam oxidation behaviour of plasma nitrided Fe-based alloys

Steam oxidation of TP347HFG, super 304H and HR3C – analysis of significance of steam flowrate and specimen surface finish

Sulphidation/oxidation behaviour of TiAlCr and Al2Au coated Ti45Al8Nb alloy at 750°C

Paulina is supported by:

About Paulina

Help