Search filters

List of works by Adam Clare

A parametric study of Inconel 625 wire laser deposition

Advancing electrochemical jet methods through manipulation of the angle of address

Alloy design and adaptation for additive manufacture

scientific article published in January 2022

Amorphous layer formation in Al86.0Co7.6Ce6.4 glass-forming alloy by large-area electron beam irradiation

Cold sprayed metal-ceramic coatings using satellited powders

Controlling DC permeability in cast steels

Corrigendum to “Laser cladding of Inconel 625 wire for corrosion protection [J. Mater. Process. Technol. 217C 2015 232–240]”

scholarly article published in Journal of Materials Processing Technology

Corrigendum to “Surface improvement of laser clad Ti–6Al–4V using plain waterjet and pulsed electron beam irradiation [J. Mater. Process. Technol. 218C 2015 1–11]”

scholarly article published in Journal of Materials Processing Technology

Corrosion behaviour of a rapidly solidified Al 87.4 Co 7.9 Ce 4.7 layer prepared by large area electron beam irradiation

Creep behaviour of inconel 718 processed by laser powder bed fusion

Development of quadrupole mass spectrometers using rapid prototyping technology

scientific article published on 5 April 2009

Effect of carbide dissolution on the corrosion performance of tungsten carbide reinforced Inconel 625 wire laser coating

scholarly article by T.E. Abioye et al published May 2016 in Journal of Materials Processing Technology

Effect of prior laser microstructural refinement on the formation of amorphous layer in an Al86Co7.6Ce6.4 alloy

Electrical discharge coating of nanostructured TiC-Fe cermets on 304 stainless steel

ElectroChemical Jet Machining of Titanium: Overcoming Passivation Layers with Ultrasonic Assistance

scholarly article by J. Mitchell-Smith & Adam Clare published 2016 in Procedia CIRP

Electrolyte Jet Machining of Titanium Alloys Using Novel Electrolyte Solutions

scholarly article by Alistair Speidel et al published 2016 in Procedia CIRP

Electrolytic-dielectrics: A route to zero recast electrical discharge machining

scientific article published in 2022

Enhanced sensing and conversion of ultrasonic Rayleigh waves by elastic metasurfaces.

scientific article published on 28 July 2017

Erosion resistance of laser clad Ti-6Al-4V/WC composite for waterjet tooling

Focussed arc tungsten inert gas brazing of zinc-coated steels

Formation mechanism of electrical discharge TiC-Fe composite coatings

Fundamental study on releasability of molded rubber from mold tool surface

article published in 2013

In situ low-cost and adaptable braze tool evaluation system with vision analysis

article published in 2014

In-situ synthesis of titanium aluminides by direct metal deposition

scholarly article by A.N.D. Gasper et al published January 2017 in Journal of Materials Processing Technology

Laser Induced Phased Arrays (LIPA) to detect nested features in additively manufactured components

scientific article

Laser cladding of Inconel 625 wire for corrosion protection

Linear ion trap fabricated using rapid manufacturing technology

scientific article

Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography

scientific article

Materials for additive manufacturing

Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy.

scientific article

Nanostructures in austenitic steel after EDM and pulsed electron beam irradiation

Physical and electrical characteristics of EDM debris

Pulsed electron beam surface melting of CoCrMo alloy for biomedical applications

Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography

Rapid Prototyping Methodologies for Ceramic Micro Components

article published in 2009

Repair of EDM induced surface cracks by pulsed electron beam irradiation

Staged thermomechanical testing of nickel superalloys produced by selective laser melting

scholarly article by Zhengkai Xu et al published November 2017 in Materials & Design

Surface finishing of intricate metal mould structures by large-area electron beam irradiation

Surface improvement of laser clad Ti–6Al–4V using plain waterjet and pulsed electron beam irradiation

Surface modification of mild steel using a combination of laser and electrochemical processes

TEM study on the electrical discharge machined surface of single-crystal silicon

Targeted rework strategies for powder bed additive manufacture

The effect of large-area pulsed electron beam melting on the corrosion and microstructure of a Ti6Al4V alloy

Thermal Activation of Electrochemical Seed Surfaces for Selective and Tunable Hydrophobic Patterning

scientific article published on 03 February 2020

Transitory electrochemical masking for precision jet processing techniques

article by J. Mitchell-Smith et al published January 2018 in Journal of Manufacturing Processes

Tribological behaviour of an electrochemical jet machined textured Al-Si automotive cylinder liner material

Workpiece debris deposition on tool electrodes and secondary discharge phenomena in micro-EDM

Paulina is supported by:

About Paulina

Help