Search filters

List of works by Tanvir Hussain

A novel method for metal–diamond composite coating deposition with cold spray and formation mechanism

article published in 2016

Advanced diamond-reinforced metal matrix composites via cold spray: Properties and deposition mechanism

Alumina-graphene nanocomposite coatings fabricated by suspension high velocity oxy-fuel thermal spraying for ultra-low-wear

Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components

article published in 2009

Bonding between aluminium and copper in cold spraying: story of asymmetry

article

Characteristics of Feedstock Materials

article

Characterization and solderability of cold sprayed Sn–Cu coatings on Al and Cu substrates

Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings

Co-combustion of cereal co-product (CCP) with a UK coal (Daw Mill): Combustion gas composition and deposition

article

Cold sprayed metal-ceramic coatings using satellited powders

Cold-Sprayed Metal Matrix Composite Coatings

article published in 2017

Comparison between oxidation of Fe–Cr–Al sputter coatings in air and air–HCl environments at 550°C

Corrosion Behavior of Cold Sprayed Titanium Coatings and Free Standing Deposits

scholarly article by Tanvir Hussain et al published 11 August 2010 in Journal of Thermal Spray Technology

Corrosion Performance of Laser Posttreated Cold Sprayed Titanium Coatings

scholarly article by T. Marrocco et al published 30 March 2011 in Journal of Thermal Spray Technology

Corrosion of cast Stellite-3 analogue in simulated PWR conditions

Deposit formation and emissions from co-firing miscanthus with Daw Mill coal: Pilot plant experiments

article

Effect of Particle and Carbide Grain Sizes on a HVOAF WC-Co-Cr Coating for the Future Application on Internal Surfaces: Microstructure and Wear

Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 °C

Fireside Corrosion Behavior of HVOF and Plasma-Sprayed Coatings in Advanced Coal/Biomass Co-Fired Power Plants

article

Fireside Corrosion of Superheater Materials in Coal/Biomass Co-fired Advanced Power Plants

article

Fireside corrosion degradation of 15Mo3, T22, T23 & T91 in simulated coal-biomass co-fired environment

Fireside corrosion degradation of HVOF thermal sprayed FeCrAl coating at 700–800°C

article published in 2015

Fireside corrosion degradation of ferritic alloys at 600°C in oxy-fired conditions

Fireside issues in advanced power generation systems

Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: Microstructure and high temperature oxidation

HVOF and Laser-Cladded Fe–Cr–B Coating in Simulated Biomass Combustion: Microstructure and Fireside Corrosion

Heat Treatment of Cold-Sprayed C355 Al for Repair: Microstructure and Mechanical Properties

High temperature chlorine-induced corrosion of Ni50Cr coating: HVOLF, HVOGF, cold spray and laser cladding

High-Temperature Performance of Ferritic Steels in Fireside Corrosion Regimes: Temperature and Deposits

scientific article published on 17 November 2016

High-temperature oxidation of HVOF thermally sprayed NiCr–Cr3C2 coatings: microstructure and kinetics

Impact phenomena in cold-spraying of titanium onto various ferrous alloys

scholarly article by Tanvir Hussain et al published August 2011 in Surface & Coatings Technology

Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating

Laser Clad and HVOF-Sprayed Stellite 6 Coating in Chlorine-Rich Environment with KCl at 700 °C

Laser Cladding of Ni50Cr: A Parametric and Dilution Study

Microscopy of fireside corrosion on superheater materials for oxy-fired pulverised fuel power plants

article

Microstructural Evolution in Solution Heat Treatment of Gas-Atomized Al Alloy (7075) Powder for Cold Spray

Microstructure and phase stability of suspension high velocity oxy-fuel sprayed yttria stabilised zirconia coatings from aqueous and ethanol based suspensions

Microstructure and wear behaviour of powder and suspension hybrid Al 2 O 3 –YSZ coatings

Modelling fireside corrosion of thermal sprayed coatings in co-firing of coal/biomass

Process parameter optimisation of laser clad iron based alloy: Predictive models of deposition efficiency, porosity and dilution

Robust Hydrophobic Surfaces from Suspension HVOF Thermal Sprayed Rare-Earth Oxide Ceramics Coatings.

scientific article

Role of Oxides and Porosity on High-Temperature Oxidation of Liquid-Fueled HVOF Thermal-Sprayed Ni50Cr Coatings

Suspension High Velocity Oxy-Fuel (SHVOF)-Sprayed Alumina Coatings: Microstructure, Nanoindentation and Wear

Suspension high velocity oxy-fuel (SHVOF) spray of delta-theta alumina suspension: Phase transformation and tribology

Suspension high velocity oxy-fuel spraying of TiO 2 : A quantitative approach to phase composition

article

Suspension high velocity oxy-fuel spraying of a rutile TiO 2 feedstock: Microstructure, phase evolution and photocatalytic behaviour

scholarly article by M. Bai et al published December 2017 in Ceramics International

Trends in fireside corrosion damage to superheaters in air and oxy-firing of coal/biomass