A New Modifier for Silica in Reinforcing SBR Elastomers for the Tyre Industry

A Possible Means to Assist the Processing of PET, PTT and PBT

A novel tin-based imidazolium-modified montmorillonite catalyst for the preparation of poly(butylene terephthalate)-based nanocomposites using in situ entropically-driven ring-opening polymerization

scholarly article in RSC Advances, vol. 5 no. 8, 2015

Acid-Catalyzed Polycondensation of 2-Acetoxymethyl-3,4-dimethylthiophene. Access to a Novel Poly(thienylene methine) with Alternating Aromatic- and Quinoid-like Structures†

Acid-Catalyzed Polycondensation of 2-Hydroxymethylthiophene and Some of Its Homologues

An Introduction to Entropically-driven Ring-opening Polymerizations

Aqueous-based immobilization of initiator and surface-initiated ATRP to construct hemocompatible surface of poly (styrene-b-(ethylene-co-butylene)-b-styrene) elastomer

scientific article published on 21 June 2013

Base-induced cycloaddition of tosylmethyl or (tert-butoxycarbonyl)methyl isocyanide to 1,4-disubstituted 2,3-dinitro-1,3-butadienes. Access to 2,3-disubstituted 4-ethynylpyrroles

Biocompatibility of polypropylene non-woven fabric membrane via UV-induced graft polymerization of 2-acrylamido-2-methylpropane sulfonic acid

Biocompatible polypropylene prepared by a combination of melt grafting and surface restructuring

Characterization of a bioinspired elastin-polypropylene fumarate material for vascular prostheses applications

Crystallization and morphology of the trigonal form in random propene/1-pentene copolymers

Design and Synthesis of Olefin Copolymers with Tunable Amounts of Comonomers Bearing Stabilizing Functionalities

Effects on sorption and diffusion in PTMSP and TMSP/TMSE copolymers of free volume changes due to polymer ageing

Ethylene-based copolymers with tunable content of polymerizable hindered phenols as nonreleasing macromolecular additives

scholarly article by Stefano Menichetti et al published 1 October 2008 in Journal of Polymer Science Part A

Exfoliated/Intercalated Rubber/Organo-Montmorillonite Nanocomposites: Preparation and Characterization

Fabrication of PP-g-PEGMA-g-heparin and its hemocompatibility: From protein adsorption to anticoagulant tendency

Functionalization of Multiwalled Carbon Nanotubes with Cyclic Nitrones for Materials and Composites: Addressing the Role of CNT Sidewall Defects

article published in 2011

High throughput synthesis of polyesters using entropically driven ring-opening polymerizations

scientific article

IN SITU RHEO-SALS EXPERIMENTS ON LDPE NANOCOMPOSITES: A PRELIMINARY STUDY

Improved biocompatibility and antifouling property of polypropylene non-woven fabric membrane by surface grafting zwitterionic polymer

Improved biocompatibility of poly (styrene-b-(ethylene-co-butylene)-b-styrene) elastomer by a surface graft polymerization of hyaluronic acid

scientific article

Improving hemocompatibility of styrene-b-(ethylene-co-butylene)-b-styrene elastomer via N-vinyl pyrrolidone-assisted grafting of poly(ethylene glycol) methacrylate

In situpolymerization of ethylene using metallocene catalysts: Effect of clay pretreatment on the properties of highly filled polyethylene nanocomposites

Innovative films with tunable permeability for fresh vegetable packaging applications

Isoselectivity and Steric Hindrance of C2Symmetric Metallocenes as the Keys to Control Structural and Thermal Features of Ethene/4-Methyl-1-Pentene Copolymers

LDPE-based blends and films stabilized with nonreleasing polymeric antioxidants for safer food packaging

Lightweight Poly(ε-Caprolactone) Composites with Surface Modified Hollow Glass Microspheres for Use in Rotational Molding: Thermal, Rheological and Mechanical Properties

scientific article published on 04 April 2019

Macromolecular Non-Releasing Additives for Commercial Polyolefins

scholarly article by Maria Carmela Sacchi et al published December 2007 in Macromolecular Symposia

Melting grafting polypropylene with hydrophilic monomers for improving hemocompatibility

Micropatterning of hydrophilic polyacrylamide brushes to resist cell adhesion but promote protein retention

scientific article published on 01 December 2014

Microstructural characteristics and thermal properties ofansa-zirconocene catalyzed copolymers of propene with higherα-olefins

Modulation of barrier properties of monolayer films from blends of polyethylene with ethylene-co-norbornene

N-vinyl pyrrolidone-assisted free radical functionalization of glycidyl methacrylate onto styrene-b-(ethylene-co-butylene)-b-styrene

Novel ethylene/norbornene copolymers as nonreleasing antioxidants for food-contact polyolefinic materials

ON THE CYCLO-DEPOLYMERIZATION OF ALKYL AROMATIC POLYESTERS AND THE IN SITU POLYMERIZATION OF THE CYCLIC OLIGOMERS PRODUCED

On properties of graft copolymers of LLDPE and novel fluorine surfactants obtained via reactive extrusion

Optimization of organo-layered double hydroxide dispersion in LDPE-based nanocomposites

Penultimate Unit Effect in Ethene/Propene Copolymerization Promoted at High Temperature by Single Center Catalysts

Penultimate-Unit Effect in Ethene/4-Methyl-1-pentene Copolymerization for a “Sequential” Distribution of Comonomers

Plasma proteins adsorption mechanism on polyethylene-grafted poly(ethylene glycol) surface by quartz crystal microbalance with dissipation

scientific article published on 23 May 2013

Plasticized and nanofilled poly(lactic acid)-based cast films: Effect of plasticizer and organoclay on processability and final properties

Polyacetylenes Bearing Mesogenic Side Groups: Synthesis and Properties, 2

Polyacetylenes bearing mesogenic side groups: synthesis and properties. Part 3. Influence of flexible spacer length and tail functionality

Polyester-based biocomposites containing wool fibres

Polypropylene modified with 2-hydroxyethyl acrylate-g-2-methacryloyloxyethyl phosphorycholine and its hemocompatibility

Polypropylene non-woven fabric membrane via surface modification with biomimetic phosphorylcholine in Ce(IV)/HNO3 redox system

Preparation of PP-g-PEG by using partial pre-irradiated polypropylene as initiator and its properties

Reactive blending of poly(ethylene 2,6-naphthalate) and Vectra A

Segmented Polyimides with Poly(ethylene oxide) Blocks Exhibiting Liquid Crystallinity

Shape controlled spherical (0D) and rod-like (1D) silica nanoparticles in silica/styrene butadiene rubber nanocomposites: Role of the particle morphology on the filler reinforcing effect

Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via UV-induced graft polymerization of N-vinyl pyrrolidone

scientific article published on 02 January 2012

Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via photo-initiated graft polymerization of poly(ethylene glycol)

Syntheses of random PET-co-PTTs and some related copolyesters by entropically-driven ring-opening polymerizations and by melt blending: Thermal properties and crystallinity

Synthesis of amphiphilic poly(cyclooctene)-graft-poly(ethylene glycol) copolymersviaROMP and its surface properties

Synthetic exploitation of the ring-opening of 3,4-dinitrothiophene. A novel access to 1,4-dialkyl- and 1,4-diaryl-2,3-dinitro- 1,3-butadienes

Synthetic exploitation of the ring-opening of 3,4-dinitrothiophene. Access to 1,4-disubstituted 2,3-dinitro-1,3-butadienes and 2,3-butanedione dioximes

Synthetic exploitation of the ring-opening of 3,4-dinitrothiophene. Part 3. Access to 1,4-diaryl- and 1,4-dialkyl-2-nitrobutanes

The acid-catalysed polycondensation of 2-acetoxymethylthiophenes. Kinetics and mechanisms

The clay mineral modifier as the key to steer the properties of rubber nanocomposites

The influence of variant PE-b-PEO segments on physical properties of LLDPE graft copolymers

The nanostructured morphology of linear polyurethanes observed by transmission electron microscopy

article

The radiation-induced grafting of polybutadiene onto silica

The trigonal form of i-PP in random C3/C5/C6 terpolymers

Thermal Behavior and Structural Features of Propene/1-Pentene Copolymers by Metallocene Catalysts

Thermal Behavior, Structure and Morphology of Propene/Higher 1-Olefin Copolymers

Thermoplastic elastomers based on compatibilized poly(butylene terephthalate) blends: Effect of functional groups and dynamic curing

Toward block copolymers from nonliving isospecific single-site catalytic systems

Unexpected Formation of Atactic Blocks in Propylene/1-Pentene Copolymers fromrac-Me2Si(2-MeBenz[e]Ind)2ZrCl2

article published in 2004

Unravelling the detailed microstructure of a semiconducting (quasi-metal) soluble polymer incorporating conjugated thienylene methine sequences

Wool fibres functionalised with a silane-based coupling agent for reinforced polypropylene composites

article published in 2014