Search filters

List of works by Makoto Ohta

A lattice Boltzmann study of blood flow in stented aneurism

A steady flow analsys on a cerebral aneurysm model with several stents for new stent design using PIV

article

Accuracy and reproducibility of patient-specific hemodynamic models of stented intracranial aneurysms: report on the Virtual Intracranial Stenting Challenge 2011.

scientific article published on 13 August 2014

Anisotropicin vitrovessel model using poly(vinyl alcohol) hydro gel and mesh material

Blood Flow Into Basilar Tip Aneurysms: A Predictor for Recanalization After Coil Embolization

scientific article

Changes in blood flow due to stented parent artery expansion in an intracranial aneurysm

article

Characterization of flow reduction properties in an aneurysm due to a stent

scientific article published on 26 August 2003

Cluster-forming property correlated with hemolytic activity by staphylococcal γ-hemolysin transmembrane pores

scholarly article by Noriko Tomita published in October 2011

Comparative analysis for evaluating the traceability of interventional devices using blood vessel phantom models made of PVA-H or silicone

scientific article published in June 2015

Computational Fluid Dynamics Analysis to Predict Endothelial Cells Migration During Flow Exposure Experiment With Placement of Two Stent Wires

scientific article published on 01 July 2018

Computational Hemodynamic Analysis for the Diagnosis of Atherosclerotic Changes in Intracranial Aneurysms: A Proof-of-Concept Study Using 3 Cases Harboring Atherosclerotic and Nonatherosclerotic Aneurysms Simultaneously

scientific article

Computational fluid dynamics of carotid arteries after carotid endarterectomy or carotid artery stenting based on postoperative patient-specific computed tomography angiography and ultrasound flow data

scientific article

Computational simulations in the cardiovascular system.

scientific article published on 7 April 2014

Control of crystalline orientation to enhance the wear resistance of ultra-high molecular weight polyethylene crystallization cups for artificial joints

article

Correlation between Reynolds number and eccentricity effect in stenosed artery models

scientific article published in January 2013

Crystal structure of the octameric pore of staphylococcal γ-hemolysin reveals the β-barrel pore formation mechanism by two components

scientific article

Daughter Sac Formation Related to Blood Inflow Jet in an Intracranial Aneurysm

scientific article

Development of a stereo dip-coating system for fabrication of tube-shaped blood vessel models

scientific article published on 24 April 2020

Difference in Transcranial Doppler Velocity and Patient Age between Proximal and Distal Middle Cerebral Artery Vasospasms after Aneurysmal Subarachnoid Hemorrhage

scientific article published on 06 July 2016

Does the lipid environment impact the open-state conductance of an engineered β-barrel protein nanopore?

scientific article

EXPERIMENTAL VALIDATION OF ULTRASONIC-MEASUREMENT-INTEGRATED SIMULATION FOR BLOOD FLOW IN AORTA

Effect of a notch at the distal end of a microcatheter on vein deformation in segmental adrenal venous sampling: a preliminary study using computational fluid dynamics

scientific article published on 18 March 2019

Effect of elasticity on wall shear stress inside cerebral aneurysm at anterior cerebral artery

scientific article published on 20 January 2016

Effect of parent artery expansion by stent placement in cerebral aneurysms

scientific article published in January 2014

Effect of the compression ratio on wear properties of slightly cross-linked ultra-high molecular weight polyethylene, crystallized under uniaxial compression

Epigenetic response of endothelial cells to different wall shear stress magnitudes: A report of new mechano-miRNAs

scientific article published on 08 January 2020

Experimental analysis on MR fluid channel flow dynamics with complex fluid–wall interactions

Flow observations in elastic stenosis biomodel with comparison to rigid-like model

scientific article published on 01 January 2013

Friction Properties of Medical Metallic Alloys on Soft Tissue–Mimicking Poly(Vinyl Alcohol) Hydrogel Biomodel

Friction Properties of Poly(vinyl alcohol) Hydrogel: Effects of Degree of Polymerization and Saponification Value

Friction of 316L stainless steel on soft-tissue-like poly(vinyl alcohol) hydrogel in physiological liquid

Friction properties of PVA-H/steel ball contact under water lubrication conditions

Frictional characteristics of erythrocytes on coated glass plates subject to inclined centrifugal forces

scientific article

Haemodynamic effects of stent diameter and compaction ratio on flow-diversion treatment of intracranial aneurysms: A numerical study of a successful and an unsuccessful case

scientific article published on 16 May 2017

Heat diffusion characteristics of magnetite nanoparticles dispersed hydro-gel in alternating magnetic field

High fidelity virtual stenting (HiFiVS) for intracranial aneurysm flow diversion: in vitro and in silico

scientific article published on 20 April 2013

Impact of stent design on intra-aneurysmal flow. A computer simulation study

scientific article published on December 2004

Implementation of computer simulation to assess flow diversion treatment outcomes: systematic review and meta-analysis

scientific article published on 23 October 2020

In vitro strain measurements in cerebral aneurysm models for cyber-physical diagnosis

scientific article

In vitro study of ultrasound radiation force-driven twinkling sign using PVA-H gel and glass beads tissue-mimicking phantom

scientific article

Influence of plaque stiffness on deformation and blood flow patterns in models of stenosis

scientific article published on 10 July 2015

Influence of stent properties on the alteration of cerebral intra-aneurysmal haemodynamics: flow quantification in elastic sidewall aneurysm models

scientific article published in January 2005

Jet-Fluid Effects on the Stented-Flow Structure in the Cavity of Cerebral Aneurysm

Manufacture of patient-specific vascular replicas for endovascular simulation using fast, low-cost method

scientific article published on 15 December 2016

Method to quantify flow reduction in aneurysmal cavities of lateral wall aneurysms produced by stent implants used for flow diversion.

scientific article published on January 2006

Methodologies to assess blood flow in cerebral aneurysms: current state of research and perspectives

scientific article published on 31 May 2009

NUMERICAL REALIZATION OF BLOOD FLOW IN ANEURYSMAL AORTA BY INTEGRATING MEASUREMENT AND SIMULATION

Numerical analysis and experimental observation of guidewire motion in a blood vessel model

article

Numerical analysis of the flow pattern in stented aneurysms and its relation to velocity reduction and stent efficiency

article

Observation of the expansion behavior and quantitative evaluation of elastic recoil of a balloon-expandable stent in three dimensions using a Micro-CT system

scientific article published on January 2012

Optimization of flow diverters for cerebral aneurysms

Optimization of strut placement in flow diverter stents for four different aneurysm configurations

scientific article published in June 2014

Parametric study of porous media as substitutes for flow-diverter stent

Porosity dependency of an optimized stent design for an intracranial aneurysm

scientific article published in September 2015

Properties of N-Butyl Cyanoacrylate–iodized Oil Mixtures for Arterial Embolization: In Vitro and In Vivo Experiments

Pulse-Wave-Pattern Classification with a Convolutional Neural Network

scientific article published on 17 October 2019

Radiofrequency ablation with a vibrating catheter: A new method for electrode cooling

scientific article published on 16 March 2016

Relative residence time prolongation in intracranial aneurysms: a possible association with atherosclerosis

scientific article

Reproducibility of haemodynamical simulations in a subject-specific stented aneurysm model--a report on the Virtual Intracranial Stenting Challenge 2007.

scientific article published on 25 June 2008

Reproduction method for dried biomodels composed of poly (vinyl alcohol) hydrogels

scientific article published on 10 April 2018

Rheological changes after stenting of a cerebral aneurysm: a finite element modeling approach.

scientific article published in November 2005

Sensitivity study on modelling a flow-diverting stent as a porous medium using computational fluid dynamics

scientific article published in July 2017

Studies on Design Optimization of Coronary Stents

article

Study of parameters for evaluating the pushability of interventional devices using box-shaped blood vessel biomodels made of PVA-H or silicone

scientific article published in January 2014

Subtracted vortex centers path line method with cinematic angiography for measurement of flow speed in cerebral aneurysms

scientific article

Surface Modification of Magnesium by NaHCO 3 and Corrosion Behavior in Hank’s solution for New Biomaterial Applications

scholarly article by Yousef Al-Abdullat et al published 2001 in Materials Transactions

THREE DIMENSIONAL IMAGING OF CEREBRAL VASCULATURE FOR COMPUTER FLUID DYNAMICS IN RAT: FEASIBILITY OF ASSESSMENT WITH MICRO-CT

The Transmembrane Domain of a Bicomponent ABC Transporter Exhibits Channel-Forming Activity

scientific article published on 5 July 2016

The effect of contact force during radiofrequency catheter ablation using a vibrating catheter: New cooling method for catheter ablation

scientific article published on 01 January 2019

Three-Dimensional Reconstruction of a Cerebral Stent using Micro-CT for Computational Simulation

article

Towards the patient-specific design of flow diverters made from helix-like wires: an optimization study

scientific article published on 28 December 2016

Two-Dimensional Optimization of a Stent for an Aneurysm

article

Vertebrobasilar junction fenestration with dumbbell-shaped aneurysms formation: computational fluid dynamics analysis

scientific article

Viscosity measurement of Xanthan-Poly(vinyl alcohol) mixture and its effect on the mechanical properties of the hydrogel for 3D modeling

scientific article published in Scientific Reports

Wear Properties of UHMWPE Oriented under Uniaxial Compression during the Molten State and at Lower Temperatures than the Melting Point

Wear resistance of lightly cross-linked ultrahigh-molecular-weight polyethylene crystallized from the melt under uniaxial compression

What does computational fluid dynamics tell us about intracranial aneurysms? A meta-analysis and critical review

scientific article published on 18 June 2019

Paulina is supported by:

About Paulina

Help