Search filters

List of works by Gelson Luis Adabo

Air abrasion before and/or after zirconia sintering: surface characterization, flexural strength, and resin cement bond strength

scientific article published on 23 December 2014

Comparison of the tensile bond strengths of cast metal crowns luted with resin cements.

scientific article published in November 2004

Does airborne-particle abrasion before, rather than after, zirconia sintering lead to higher mechanical strength even under aging challenge?

scientific article published on 23 April 2019

Effect of disinfectant agents on dimensional stability of elastomeric impression materials

scientific article published on 01 May 1999

Effect of metal primers on bond strength of resin cements to base metals

scientific article

Effect of phosphate-bonded investments on titanium reaction layer and crown fit.

scientific article published on April 2010

Effect of surface treatments on repair with composite resin of a partially monoclinic phase transformed yttrium-stabilized tetragonal zirconia

scientific article published on 20 May 2017

Effect of surface treatments on the bond strength of a resin cement to commercially pure titanium

scientific article published on 01 January 2010

Effect of surface treatments on the shear bond strength of luting cements to Y-TZP ceramic

scientific article published on 18 November 2014

Effect of thermal treatments on tensile strength of commercially cast pure titanium and Ti-6Al-4V alloys

scientific article published on 01 August 2005

Effects of extreme cooling methods on mechanical properties and shear bond strength of bilayered porcelain/3Y-TZP specimens

scientific article published on 23 January 2013

Efficacy of air-abrasion technique and additional surface treatment at titanium/resin cement interface.

scientific article published in August 2012

Evaluation of the thermal shrinkage of titanium and the setting and thermal expansion of phosphate-bonded investments

scientific article published on 01 July 2007

Improvement to the marginal coping fit of commercially pure titanium cast in phosphate-bonded investment by using a simple pattern coating technique.

scientific article published in July 2012

Influence of Zirconia-Coated Bioactive Glass on Gingival Fibroblast Behavior

scientific article published on 22 July 2019

Influence of activation modes on diametral tensile strength of dual-curing resin cements.

scientific article published in October 2005

Influence of the final temperature of investment healting on the tensile strength and Vickers hardness of CP Ti and Ti-6Al-4V alloy.

scientific article published on February 2007

Internal adaptation of cast titanium crowns.

scientific article published on August 2007

Shear bond strength of different repair systems to titanium after water aging.

scientific article published on 7 February 2012

Shear bond strength of metal-ceramic repair systems.

scientific article published in September 2006

The effect of coating patterns with spinel-based investment on the castability and porosity of titanium cast into three phosphate-bonded investments

scientific article published on 16 August 2010

The effect of different surface treatments on the shear bond strength of luting cements to titanium.

scientific article published in December 2012

The effect of mold temperature on castability of CP Ti and Ti-6Al-4V castings into phosphate bonded investment materials.

scientific article

The influence of chemical activation on hardness of dual-curing resin cements

scientific article published on 01 July 2004

The influence of short-heating-cycle investments on the quality of commercially pure titanium castings

scientific article

The mechanical behavior of high-translucent monolithic zirconia after adjustment and finishing procedures and artificial aging

scientific article published on 10 May 2019

The volumetric fraction of inorganic particles and the flexural strength of composites for posterior teeth

scientific article published on 01 July 2003

Titanium surface topography after brushing with fluoride and fluoride-free toothpaste simulating 10 years of use.

scientific article

Vickers hardness of cast commercially pure titanium and Ti-6Al-4V alloy submitted to heat treatments

scientific article published on 01 January 2006

Paulina is supported by:

About Paulina

Help