Search filters

List of works by Farid Akhtar

A high-entropy B4(HfMo2TaTi)C and SiC ceramic composite

scientific article published on 01 April 2019

A new kind of age hardenable martensitic stainless steel with high strength and toughness

article by Farid Akhtar et al published July 2007 in Ironmaking and Steelmaking

A new method to process high strength TiCN stainless steel matrix composites

A study of the sintering of diatomaceous earth to produce porous ceramic monoliths with bimodal porosity and high strength

Adherent and low friction nano-crystalline diamond film grown on titanium using microwave CVD plasma

scholarly article by S.J. Askari et al published March 2008 in Diamond and Related Materials

Aluminophosphate monoliths with high CO2-over-N2 selectivity and CO2 capture capacity

scholarly article in RSC Advances, vol. 4 no. 99, 2014

An investigation on the solid state sintering of mechanically alloyed nano-structured 90W–Ni–Fe tungsten heavy alloy

scholarly article by Farid Akhtar published May 2008 in International Journal of Refractory Metals and Hard Materials

Behavior of residual carbon in Sm(Co, Fe, Cu, Zr)z permanent magnets

Ceramic reinforced high modulus steel composites: processing, microstructure and properties

Chemical durability of hierarchically porous silicalite-I membrane substrates in aqueous media

Colloidal Processing and Thermal Treatment of Binderless Hierarchically Porous Zeolite 13X Monoliths for CO2 Capture

Colloidal processing and CO2 capture performance of sacrificially templated zeolite monoliths

Development of Si3N4/Al composite by pressureless melt infiltration

article

Effect of 10 wt% VC on the Friction and Sliding Wear of Spark Plasma–Sintered WC–12 wt% Co Cemented Carbides

Effect of Additive Cu-10Sn Alloy on Sintering Behavior of Elemental Powders in Composition of 465 Stainless Steel

article

Effect of Cu3P addition on sintering behaviour of elemental powders in the composition of 465 stainless steel

article

Effect of WC particle size on the microstructure, mechanical properties and fracture behavior of WC–(W, Ti, Ta) C–6wt% Co cemented carbides

Effect of annealing environment on the crack healing and mechanical properties of (Mo0.97Nb0.03)(Si0.97Al0.03)2

Effect of heating rate on porous TiAl-based intermetallics synthesized by thermal explosion

Effect of the composition of starting materials of Mo–Si on the mechanically induced self-propagating reaction

article

Effects of tungsten and aluminum additions on the formation of molybdenum disilicide by mechanically-induced self-propagating reaction

article

Enhanced sintering, microstructure evolution and mechanical properties of 316L stainless steel with MoSi2 addition

article

Fabrication and properties of freeze-cast mullite foams derived from coal-series kaolin

Formation of Mo−Si−Ti Alloys by Self−propagating Combustion Synthesis

Hierarchical porous TiAl3 intermetallics synthesized by thermal explosion with a leachable space-holder material

Hierarchically Porous Ceramics from Diatomite Powders by Pulsed Current Processing

Hierarchically porous binder-free silicalite-1 discs: a novel support for all-zeolite membranes

High temperature tribology of polymer derived ceramic composite coatings

scientific article published in Scientific Reports

Highly porous open cellular TiAl-based intermetallics fabricated by thermal explosion with space holder process

Laminated Adsorbents with Very Rapid CO2 Uptake by Freeze-Casting of Zeolites

scientific article published on 27 March 2013

Laminated porous diatomite monoliths for adsorption of dyes from water

Lubrication effectiveness of composite lubricants during P/M electrostatic die wall lubrication and warm compaction

article

Magnetic properties and microstructure of radially oriented Sm(Co,Fe,Cu,Zr)z ring magnets

Mechanical performance and CO2 uptake of ion-exchanged zeolite A structured by freeze-casting

Methylcellulose-Directed Synthesis of Nanocrystalline Zeolite NaA with High CO₂ Uptake

scientific article published on 28 July 2014

Microsphere Assemblies via Phosphonate Monoester Coordination Chemistry

scientific article published on 16 January 2018

Microstructure and property evolution during the sintering of stainless steel alloy with Si3N4

Microstructure evolution and wear properties of in situ synthesized TiB2 and TiC reinforced steel matrix composites

Microstructure, mechanical and fretting wear properties of TiC-stainless steel composites

Microstructure, mechanical properties, electrical conductivity and wear behavior of high volume TiC reinforced Cu-matrix composites

Mixed anionic surfactant-templated mesoporous silica nanoparticles for fluorescence detection of Fe(3.).

scientific article published on 30 November 2015

Nanocellulose–Zeolite Composite Films for Odor Elimination

scientific article published on 24 June 2015

Optimized cesium and potassium ion-exchanged zeolites A and X granules for biogas upgrading

scholarly article in RSC Advances, vol. 8 no. 65, 2018

Oxidation properties of self-propagating high temperature synthesized niobium disilicide

scholarly article by Binbin Song et al published August 2014 in Corrosion Science

Preparation of graded silicalite-1 substrates for all-zeolite membranes with excellent CO 2 /H 2 separation performance

Processing, microstructure and properties of hierarchically porous Cu

Processing, microstructure, properties and wear behavior of in situ synthesized TiB2 and TiC thick films on steel substrates

Reactive sintering and properties of TiB2 and TiC porous cermets

Sintering Behavior of Elemental Powders with FeB Addition in the Composition of Martensitic Stainless steel

article

Sintering behavior, microstructure and properties of TiC-FeCr hard alloy

Solid-state (13) C, (15) N and (29) Si NMR characterization of block copolymers with CO2 capture properties

scientific article

Strong and binder free structured zeolite sorbents with very high CO2-over-N2 selectivities and high capacities to adsorb CO2 rapidly

Strong hierarchically porous monoliths by pulsed current processing of zeolite powder assemblies

scientific article published in March 2010

Structuring adsorbents and catalysts by processing of porous powders

Studies on the adsorption of chromium(VI) onto 3-Mercaptopropionic acid coated superparamagnetic iron oxide nanoparticles.

scientific article published on 19 March 2014

Subgrain-controlled grain growth in the laser-melted 316 L promoting strength at high temperatures.

scientific article published on 9 May 2018

Surface functionalized nanofibers for the removal of chromium(VI) from aqueous solutions

Surface microstructural changes of spark plasma sintered zirconia after grinding and annealing

article published in 2016

Synthesis and Properties of MoSi2-MoB-SiC Ceramics

Synthesis and characterization of nano-crystalline CVD diamond film on pure titanium using Ar/CH4/H2 gas mixture

scholarly article by S.J. Askari et al published May 2007 in Materials Letters

Synthesis, microstructure and mechanical properties of (Mo,Ti)Si 2 /Al 2 O 3 composites prepared by thermite-reaction-assisted combustion synthesis

Synthesis, microstructure and mechanical properties of Al2O3 reinforced Ni3Al matrix composite

Synthesis, microstructure and properties of MoSi 2 –5 vol%Al 2 O 3 composites

Tensile behavior change depending on the varying tungsten content of W–Ni–Fe alloys

scholarly article by Islam S. Humail et al published September 2007 in International Journal of Refractory Metals and Hard Materials

Two-step growth of high-quality nano-diamond films using CH4/H2 gas mixture

scholarly article by S.J. Askari et al published January 2007 in Vacuum

WITHDRAWN: Processing, microstructure and mechanical properties of TiC–465 stainless steel/465 stainless steel layer composites

retracted paper

Paulina is supported by:

About Paulina

Help