<i>In-Situ </i>Texture Measurements by Synchrotron Radiation of TRIP Steel during an Austempering Treatment

A quantitative investigation of the effect of Mn segregation on microstructural properties of quenching and partitioning steels

Advanced High Strength Steels: Improved Properties by Design of Textures and Microstructures

Advanced High-Strength Steels by Quenching and Partitioning

scientific article published on 8 September 2021

An approach to microstructure quantification in terms of impact properties of HSLA pipeline steels

Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn(wt%) quenching and partitioning steel

Analytical Formulation for Temperature Evolution in Flat Wheel-Rail Sliding Surfaces

Anisotropy of Retained Austenite Stability during Transformation to Martensite in a TRIP-Assisted Steel

Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel

Automatic Meshing Method for Optimisation of the Fusion Zone Dimensions in Finite Element Models of Welds

Bainite plate thickness reduction and microstructure tailoring by double austempering of Al-rich 3Mn steel

scientific article published in September 2022

Behavior of ultrafast annealed advanced high strength steels under static and dynamic conditions

scientific article published in April 2020

Calculation of macroscopic elasto-plastic anisotropy based on an analytical expression of the Orientation Distribution Function in the case of fibre textures

Combined Martensite and Bainite Formation from Austenite Decomposition in HSLA Steel

Correlative microscopy of a carbide-free bainitic steel.

scientific article

Crystallographic Texture as a Factor Enabling Ductile Fracture Arrest in High Strength Pipeline Steel

Development of a New Downscale Setup for Wheel-Rail Contact Experiments under Impact Loading Conditions

Ductile to brittle transition in ITER specification tungsten assessed by combined fracture toughness and bending tests analysis

Effect of Grain Boundary-Magnetic Domain Interaction on the Magnetization Behavior of Non-Oriented Electrical Steels

Effect of Heat Treatment on Fracture during Bending in AA6016 Aluminium Alloy Sheets

Effect of Q&P parameters on microstructure development and mechanical behaviour of Q&P steels

Effect of Ti on the Microstructure and Mechanical Properties of a Hot Rolled Advanced High Strength Steel Strip

Effect of Ultra-Fast Heat Treatment on the Subsequent Formation of Mixed Martensitic/Bainitic Microstructure with Carbides in a CrMo Medium Carbon Steel

Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel

Effect of niobium and grain boundary density on the fire resistance of Fe–C–Mn steel

Effects of Heat Treatment on Morphology, Texture and Mechanical Properties of a MnSiAl Multiphase Steel with TRIP Behavior

Effects of Heat Treatment on Morphology, Texture, and Mechanical Properties of a MnSiAl Multiphase Steel with TRIP Behavior

Effects of Holding Time on Thermomechanical Fatigue Properties of Compacted Graphite Iron Through Tests with Notched Specimens

Electron Microscopy Investigations of А356 Alloy Modified with Nanoparticles

Evolution of recrystallization textures in particle containing Al alloys after various rolling reductions: Experimental study and modeling

Factors influencing the austenite stability during tensile testing of Quenching and Partitioning steel determined via in-situ Electron Backscatter Diffraction

High strain rate tensile behavior of a quenching and partitioning (Q&P) Fe-0.25C-1.5Si-3.0Mn steel

High temperature deformation of silicon steel

High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

Impact of neutron irradiation on the strength and ductility of pure and ZrC reinforced tungsten grades

scientific article published in August 2020

In situ austenite–martensite interface mobility study during annealing

article

Influence of Finishing Rolling Variables on the Austenite Recrystallization and Grain Growth

Influence of Microstructure on Mechanical Properties of Bainitic Steels in Railway Applications

scientific article

Influence of Rolling Temperature and Cooling Rate on Microstructure and Properties of Pipeline Steel Grades

Influence of Texture on Welding Stress Calculations

Investigation of the Dynamic Strain Aging Effect in Austenitic Weld Metals by 3D-DIC

scientific article published on 3 February 2023

Investigation of the structure and mechanical properties of castings of alloy AlSi7Mg, cast irons GG15 and GG25 and steel GX120Mn12, modified by nanosized powders

Isochronal annealing of a deformed Fe-7.5 mass.% Si-steel

Laboratory simulation of martensite formation of white etching layer in rail steel

Linear Contraction Behavior of Low-Carbon, Low-Alloy Steels During and After Solidification Using Real-Time Measurements

Mechanical and Metallurgical Aspects of the Resistance to Ductile Fracture Propagation in the New Generation of Gas Pipelines

Mechanical behavior and microstructure evolution of a quenched and partitioned steel during drop weight impact and punch testing

Mesoscopic EBSD Analysis and Mesomechanical Behavior of Ridging or Roping in AA6XXX Alloys

Micro and Nanoscale Characterization of Complex Multilayer-Structured White Etching Layer in Rails

Microstructural Characterization of Hydrogen Induced Cracking in TRIP Steels by EBSD

Microstructural Control of Ductile Crack Propagation in TMCP HSLA Pipeline Steels

Microstructural Evolution of Compacted Graphite Iron under Thermo-Mechanical Fatigue Conditions

Microstructural evolution and strengthening mechanisms in Al7075/ graphene nano-plates/ carbon nano-tubes composite processed through accumulative roll bonding

scientific article published in March 2021

Microstructure and Properties of Ultrafast Annealed High Strength Steel

Modeling temperature evolution of wheel flat during formation

Modeling the Magnetic Properties of Non-Oriented Electrical Steels Based on Microstructural Parameters

Modeling the crystallographic changes in processing of Al alloys

Morphological and crystallographic anisotropy of severely deformed commercially pure aluminium by three-dimensional electron backscatter diffraction

On the Work-hardening Description of Low Carbon Steel Sheets by a Microstructure Based Model

Phase transformations during the decomposition of austenite below M s in a low-carbon steel

Physical Simulation of Hot Rolling Steel Plate and Coil Production for Pipeline Applications

Precipitation in simultaneously nitrided and aged Mo-containing maraging steel

Quantification of Splitting in X80 Pipeline Steel

Reconstruction of the rolling contact fatigue cracks in rails using X-ray computed tomography

Resolving the geometrically necessary dislocation content in severely deformed aluminum by transmission Kikuchi diffraction

Splitting susceptibility in modern X80 pipeline steels

Static and dynamic response of ultra-fast annealed advanced high strength steels

Study of Carbide Dissolution and Austenite Formation during Ultra–Fast Heating in Medium Carbon Chromium Molybdenum Steel

Temperature Dependence of the Static and Dynamic Behaviour in a Quenching and Partitioning Processed Low-Si Steel

scientific article published on 15 April 2020

Temperature-Dependent Microstructural Evolution of Al-Rich Medium-Mn Steel During Intercritical Annealing

scientific article published on 13 June 2022

Tensile properties of baseline and advanced tungsten grades for fusion applications

The Effect of Different Annealing Strategies on the Microstructure Development and Mechanical Response of Austempered Steels

scientific article published on 29 June 2021

The Effect of Heating Rate on the Microstructure of a Soft-Annealed Medium Carbon Steel

The Effect of Heating Rate on the Recrystallization Behavior in Cold Rolled Ultra Low Carbon Steel

The Effect of Ultra-Fast Heating on the Microstructure, Grain Size and Texture Evolution of a Commercial Low-C, Medium-Mn DP Steel

The Effect of Ultrafast Heating in Cold-Rolled Low Carbon Steel: Recrystallization and Texture Evolution

The Effect of Ultrafast Heating on Cold-Rolled Low Carbon Steel: Formation and Decomposition of Austenite

The Role of Parent Phase Topology in Double Young–Kurdjumow–Sachs Variant Selection during Phase Transformation in Low-Carbon Steels

scientific article published on 30 May 2022

The influence of ultra-fast annealing prior to quenching and partitioning on the microstructure and mechanical properties

Thermomechanical analysis of the wheel-rail contact using a coupled modelling procedure

Time-Dependent Evolution of Volume Fraction and Stability of Retained Austenite in a Hot-Rolled and Intercritically Annealed Al-Alloyed Medium-Mn Steel

scientific article published on 20 February 2023

Tribological and Microstructural Characterization of Ultrafine Layers Induced by Wear in Ductile Alloys

Ultrafine gradient microstructure induced by severe plastic deformation under sliding contact conditions in copper

‘Flash’ Annealing in a Cold-Rolled Low Carbon Steel Alloyed With Cr, Mn, Mo, and Nb: Part I - Continuous Phase Transformations

“Brown etching layer”: A possible new insight into the crack initiation of rolling contact fatigue in rail steels?

“Flash” Annealing in a Cold-Rolled Low Carbon Steel Alloyed with Cr, Mn, Mo, and Nb: Part II-Anisothermal Recrystallization and Transformation Textures