"114"-Type Nitrides LnAl(Si4-x Alx )N7 Oδ with Unusual [AlN6 ] Octahedral Coordination.

scientific article

A comparative study of powder metallurgical (PM) and wrought Fe–Mn–Si alloys

A new lubricant based binder system for feedstock formulation from HDH-Ti powder

A novel high-strength lithium disilicate glass-ceramic featuring a highly intertwined microstructure

A porous (La, Sm) co-doped Sialon-polytypoid ceramic with colour and structure differences in multilayers

A titanium composite with dual reinforcements of micrometer sized TiB and submicrometer sized Y2O3

Achieving strength-ductility synergy in semi-solid squeeze cast 6TiB2/Al–17Si–4Cu composites by heat treatment

article published in 2022

Achieving theoretical thermal conductivity and coeffieicent of thermal expansion in a W-Cu composite sheet

Ag nanocrystals anchored CeO2/graphene nanocomposite for enhanced supercapacitor applications

An easy-to-decompose binder for Ti metal injection molding: Preparation and characterization of feedstock

An in situ Study of NiTi Powder Sintering Using Neutron Diffraction

Analysis of rheological behaviour of titanium feedstocks formulated with a water-soluble binder system for powder injection moulding

scholarly article by Thavanayagam et al published January 2015 in Powder Technology

Anodization of NiTi alloy in an ethylene glycol electrolyte

CaCu 3 Ti 4 O 12 –PVDF polymeric composites with enhanced capacitive energy density

article published in 2015

Characterisation and properties of powder-rolled porous Ti sheets and IrO 2 /Ti electrodes

Comparison of the reciprocating sliding wear of 58Ni39Ti-3Hf alloy and baseline 60NiTi

Compatibility improvement of Ti-MIM feedstock using liquid surfactant

Consolidation of Titanium, and Ti-6Al-4V Alloy Powders by Powder Compact Forging

Constructing a PVDF-based composite solid-state electrolyte with high ionic conductivity Li6.5La3Zr1.5Ta0.1Nb0.4O12 for lithium metal battery

Crystalline phase formation, microstructure and mechanical properties of a lithium disilicate glass–ceramic

article published in 2012

Crystallization of a high-strength lithium disilicate glass-ceramic: An XRD and solid-state NMR investigation

Degradable porous Fe-35wt.%Mn produced via powder sintering from NH4HCO3 porogen

Dehydrogenation and Sintering of TiH2: An In Situ Study

Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms

Effect of Immersion in Simulated Body Fluid on the Mechanical Properties and Biocompatibility of Sintered Fe–Mn-Based Alloys

Effect of PEG molecular weight on rheological properties of Ti-MIM feedstocks and water debinding behaviour

Effect of Sintering Time on the Densification, Microstructure, Weight Loss and Tensile Properties of a Powder Metallurgical Fe-Mn-Si Alloy

Effect of electric current on crystal orientation and its contribution to densification during spark plasma sintering

Effects of Mechanical Milling and Sintering Temperature on the Densification, Microstructure and Tensile Properties of the Fe–Mn–Si Powder Compacts

Effects of deposition time and current density on PbO2 electrosynthesis from methanesulfonate electrolyte

Electrochemical performance of Mg-Sn alloy anodes for magnesium rechargeable battery

Energy absorption characteristics and preparation of porous titanium with high porosity

Enhanced extrinsic dielectric response of TiO2 modified CaCu3Ti4O12 ceramics

Fabrication of Ni-Rich 58NiTi and 60NiTi from Elementally Blended Ni and Ti Powders by a Laser Powder Bed Fusion Technique: Their Printing, Homogenization and Densification

scientific article published in 2022

Facile large scale synthesis of Bi2S3 nano rods–graphene composite for photocatalytic photoelectrochemical and supercapacitor application

Facile synthesis of amorphous Cr 2 O 3 /N-doped carbon nanosheets and its excellent lithium storage property

Filtered cathodic vacuum arc deposition of thin film copper

Hierarchical titanium surface textures affect osteoblastic functions

scientific article published on 3 October 2011

High capacity porous VB2/Ni anodes for VB2/air batteries

High-Entropy Oxides Prepared by Dealloying Method for Supercapacitors

article published in 2023

High-performance flexible all-solid-state asymmetric supercapacitors from nanostructured electrodes prepared by oxidation-assisted dealloying protocol

Hydrogen Assisted Magnesiothermic Reduction of Y-Doped, Nanocrystalline TiO2

Improving an easy-to-debind PEG/PPC/PMMA-based binder

Improving dielectric properties and thermal conductivity of polymer composites with CaCu 3 Ti 4 O 12 and β- SiC hybrid fillers

Improving titanium injection moulding feedstock based on PEG/PPC based binder system

In situ high-temperature crystallographic evolution of a nonstoichiometric Li2O·2SiO2 glass.

scientific article

In situ neutron diffraction observations of Ti-TiB composites

Incorporation of PVP into PEG/PMMA based binder system to minimize void nucleation

Influence of powder shape on atomic diffusivity and resultant densification mechanisms during spark plasma sintering

Innenrücktitelbild: “114”-Type Nitrides LnAl(Si4−x Al x )N7 O δ with Unusual [AlN6 ] Octahedral Coordination (Angew. Chem. 14/2017)

Inside Back Cover: “114”-Type Nitrides LnAl(Si4−x Al x )N7 O δ with Unusual [AlN6 ] Octahedral Coordination (Angew. Chem. Int. Ed. 14/2017)

Investigation of phase evolution of CaCu3Ti4O12 (CCTO) by in situ synchrotron high-temperature powder diffraction

Investigation of the Solid-Solution Limit, Crystal Structure, and Thermal Quenching Mitigation of Sr-Substituted Rb 2 CaP 2 O 7 :Eu 2+ Phosphors for White LED Applications

Laser deposition technology assisted by friction stir processing for preparation of nanostructured Fe–Cr–Si alloy layer

Laser powder bed fusion of Al–Mg–Zr alloy: Microstructure, mechanical properties and dynamic precipitation

Magnetoelectrodeposition of Ni–W alloy coatings for enhanced hydrogen evolution reaction

article published in 2016

Mechanical Behaviour of Titanium, Ti-6Al-4V (wt %) Alloy and Ti-47Al-2Cr (at %) Alloy Produced Using Powder Compact Forging

Mechanical and microstructural characteristics of as-sintered and solutionized porous 60NiTi

Microstructural Characterization and Mechanical Properties of 5 vol.% (TiB<sub>w</sub>+TiC<sub>p</sub>)/Ti Composite Produced by Forging

Microstructural Evolution during Pressureless Sintering of Blended Elemental Ti-Al-V-Fe Titanium Alloys from Fine Hydrogenated-Dehydrogenated Titanium Powder

Microstructural evolution during mechanical milling of Ti/Al powder mixture and production of intermetallic TiAl cathode target

Microstructure and degradation behavior of forged Fe – Mn – Si alloys

Microwave-Assisted Synthesis of High Dielectric Constant CaCu3Ti4O12 from Sol–Gel Precursor

Modification of PEG/PMMA binder by PVP for titanium metal injection moulding

Neutron diffraction investigation of vacuum sintering in a binary Fe/Mn powder mixture

Nickel-rich NiCo LDHs supported on hollow carbon shells for hybrid supercapacitors

Nucleation and Crystallization Kinetics of a Multicomponent Lithium Disilicate Glass by in Situ and Real-Time Synchrotron X-ray Diffraction

PbO2 electrodes prepared by pulse reverse electrodeposition and their application in benzoic acid degradation

Phase control and stabilization of 1T-MoS2 via black TiO2− nanotube arrays supporting for electrocatalytic hydrogen evolution

Physicochemical Characterization of PbO 2 Coatings Electrosynthesized from a Methanesulfonate Electrolytic Solution

Preface

Printing of NiTinol parts with characteristics respecting the general microstructural, compositional and mechanical requirements of bone replacement implants

Reciprocating Sliding Wear Behavior of 60NiTi As Compared to 440C Steel under Lubricated and Unlubricated Conditions

Shape memory TiNi powders produced by plasma rotating electrode process for additive manufacturing

Site preference and defect engineering of a highly efficient blue-emitting phosphor Sr 2 SiO 4 :Ce 3+ /K + toward thermally enhanced luminescence

Spheroidization of tantalum powder by radio frequency inductively coupled plasma processing

Structural Response of Lithium Disilicate in Glass Crystallization

article published in 2014

Suitability of PEG/PMMA-based metal injection moulding feedstock: an experimental study

Synthesis of a novel Al foam with a periodic architecture by introducing hollow Al tubes and Al/Mg powders

Synthesis, characterization, and photocatalytic performance of Cu/Y co-doped TiO2 nanoparticles

The Microstructural Characterization and Mechanical Properties of 5 vol. % (TiBw + TiCp)/Ti Composite Produced by Open-Die Forging

The effect of reaction conditions on formation of wet precipitated calcium phosphates

The influence of the local effect of electric current on densification of tungsten powder during spark plasma sintering

The performance of thermally sprayed titanium based composite coatings in molten aluminium

Thermomechanical Processing of a Near-α Ti Matrix Composite Reinforced by TiB_w

scientific article published on 16 December 2020

Titanium Powder Sintering in a Graphite Furnace and Mechanical Properties of Sintered Parts

Titanium metal matrix composites: An overview

Trace phase formation, crystallization kinetics and crystallographic evolution of a lithium disilicate glass probed by synchrotron XRD technique

scientific article published on 17 March 2015

Tuning Ca:P ratio by NaOH from monocalcium phosphate monohydrate (MCPM)

Ultrastrong and ductile (CoCrNi)94Ti3Al3 medium-entropy alloys via introducing multi-scale heterogeneous structures

Water debinding behaviour of water soluble Ti-MIM feedstock

Weight loss behavior of a vacuum sintered powder metallurgical Fe–Mn–Si alloy

Wet-chemical synthesis of spinel Li4Ti5O12 as a negative electrode

iCatcher+: Robust and automated annotation of infant's and young children's gaze direction from videos collected in laboratory, field, and online studies

“114”-Type Nitrides LnAl(Si4−x Al x )N7 O δ with Unusual [AlN6 ] Octahedral Coordination