Search filters

List of works by Nick Silikas

3D-FE analysis of soft liner-acrylic interfaces under shear loading

scientific article published on 26 February 2011

3D-marginal adaptation versus setting shrinkage in light-cured microhybrid resin composites

scientific article published on 09 March 2006

A laboratory evaluation of the physical and mechanical properties of selected root canal sealers.

scientific article published on 23 June 2010

A mathematical model for simulating the bone remodeling process under mechanical stimulus.

scientific article published on 29 November 2006

Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties

scientific article published on 31 May 2017

Academy of Dental Materials guidance-Resin composites: Part II-Technique sensitivity (handling, polymerization, dimensional changes).

scientific article

An ex situ study of the adsorption of calcium phosphate from solution onto TiO2(110) and Al2O3(0001)

Analysis of long-term monomer elution from bulk-fill and conventional resin-composites using high performance liquid chromatography

scientific article published on 13 November 2015

Assessing Tensile Bond Strength Between Denture Teeth and Nano-Zirconia Impregnated PMMA Denture Base

scientific article published on 01 December 2020

Candidacidal effect of fluconazole and chlorhexidine released from acrylic polymer

scientific article published on 21 November 2012

Chemical, mechanical and biological properties of contemporary composite surface sealers

scientific article published on 26 October 2015

Chlorhexidine is a highly effective topical broad-spectrum agent against Candida spp.

scientific article published on 17 October 2012

Colour-stability and gloss-retention of silorane and dimethacrylate composites with accelerated aging.

scientific article

Comparative assessment of the roughness, hardness, and wear resistance of aesthetic bracket materials.

scientific article published in September 2005

Creep deformation of restorative resin-composites intended for bulk-fill placement

scientific article published on 30 May 2012

Curing efficiency of high-intensity light-emitting diode (LED) devices.

scientific article

Degradation resistance of ormocer- and dimethacrylate-based matrices with different filler contents

scientific article published on 02 November 2011

Degradation resistance of silorane, experimental ormocer and dimethacrylate resin-based dental composites

scientific article published on 01 December 2011

Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals

scientific article published on 08 July 2013

Development and testing of novel bisphenol A-free adhesives for lingual fixed retainer bonding

scientific article published on 11 December 2015

Development of viscoelastic stability of resin-composites incorporating novel matrices

scientific article published on 01 December 2015

Diffusion and concurrent solubility of self-adhering and new resin-matrix composites during water sorption/desorption cycles.

scientific article published on 16 November 2010

Edge strength of indirect restorative materials

scientific article published on 21 June 2009

Edge-strength of flowable resin-composites.

scientific article

Effect of Cleansers on the Colour Stability of Zirconia Impregnated PMMA Bio-Nanocomposite

scientific article published on 06 September 2020

Effect of etching time and resin bond on the flexural strength of IPS e.max Press glass ceramic.

scientific article

Effect of extraoral aging conditions on mechanical properties of maxillofacial silicone elastomer.

scientific article published on 20 July 2011

Effect of filler size and shape on local nanoindentation modulus of resin-composites.

scientific article published on 15 July 2008

Effect of net fiber reinforcement surface treatment on soft denture liner retention and longevity

scientific article

Effect of new obturating materials on vertical root fracture resistance of endodontically treated teeth

scientific article published on 16 April 2007

Effect of the Composition of CAD/CAM Composite Blocks on Mechanical Properties

article

Effectiveness of self-adhesive luting cements in bonding to chlorhexidine-treated dentin

scientific article published on 26 December 2011

Evaluation of Equivalent Flexural Strength for Complete Removable Dentures Made of Zirconia-Impregnated PMMA Nanocomposites

scientific article published on 05 June 2020

Evaluation of root canal obturation: a three-dimensional in vitro study

scientific article published on 26 February 2009

Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter

scientific article published on 01 January 2007

Ex vivo surface and mechanical properties of coated orthodontic archwires.

scientific article published on 14 November 2008

Experimental and FE shear-bonding strength at core/veneer interfaces in bilayered ceramics

scientific article published on 07 April 2011

Extended setting shrinkage behavior of endodontic sealers

scientific article published on 01 January 2008

Finite element analysis of bonded model Class I 'restorations' after shrinkage

scientific article published on 29 October 2011

Fungicidal amounts of antifungals are released from impregnated denture lining material for up to 28 days

scientific article published on 03 March 2012

Hygroscopic dimensional changes of self-adhering and new resin-matrix composites during water sorption/desorption cycles

scientific article published on November 26, 2010

Hygroscopic expansion kinetics of dental resin-composites

scientific article

Impregnation with antimicrobials challenge bonding properties and water sorption behaviour of an acrylic liner

scientific article published on 10 May 2012

In vitro characterization of two laboratory-processed resin composites

scientific article published on 01 July 2003

Initial versus final fracture of metal-free crowns, analyzed via acoustic emission

scientific article

Long-Term Sorption and Solubility of Zirconia-Impregnated PMMA Nanocomposite in Water and Artificial Saliva

scientific article published on 24 August 2020

Long-term sorption and solubility of bulk-fill and conventional resin-composites in water and artificial saliva

scientific article

Measurement of Fracture Strength of Zirconia Dental Implant Abutments with Internal and External Connections Using Acoustic Emission

scientific article published on 23 June 2019

Mechanical properties of coated superelastic archwires in conventional and self-ligating orthodontic brackets

scientific article published on 01 February 2010

Metallurgical characterization of experimental Ag-based soldering alloys

scientific article

Methacrylate- and silorane-based composite restorations: hardness, depth of cure and interfacial gap formation as a function of the energy dose.

scientific article published on 16 September 2011

Micro-CT and FE-SEM enamel analyses of calcium-based agent application after bleaching.

scientific article

Micro-Raman spectroscopic analysis of TiO₂ phases on the root surfaces of commercial dental implants

scientific article

Multi-technique characterization of retrieved bone cement from revised total hip arthroplasties

scientific article published in 2003

Multitechnique characterization of CPTi surfaces after electro discharge machining (EDM).

scientific article published on 17 March 2013

Multitechnique characterization of conventional and experimental Ag-based brazing alloys for orthodontic applications.

scientific article published on 29 January 2018

Nanoindentation creep versus bulk compressive creep of dental resin-composites

scientific article published on 20 September 2012

Nanomechanical properties of dental resin-composites

scientific article published on 29 September 2012

Novel silane encapsulation system for tribochemical resin bonding to a Co-Cr alloy.

scientific article

Physical and chemical properties of model composites containing quaternary ammonium methacrylates

scientific article

Polymerization kinetics and impact of post polymerization on the Degree of Conversion of bulk-fill resin-composite at clinically relevant depth

scientific article published on 18 August 2015

Polymerization shrinkage kinetics and shrinkage-stress in dental resin-composites

scientific article published on 28 May 2016

Post-cure depth of cure of bulk fill dental resin-composites.

scientific article published on 20 November 2013

Post-irradiation hardness development, chemical softening, and thermal stability of bulk-fill and conventional resin-composites

scientific article published on 13 December 2014

Qualitative and quantitative characterization of monomers of uncured bulk-fill and conventional resin-composites using liquid chromatography/mass spectrometry.

scientific article

Resin-based composites show similar kinetic profiles for dimensional change and recovery with solvent storage.

scientific article published on 25 July 2015

Rheological properties of resin composites according to variations in composition and temperature.

scientific article published on 12 March 2014

Self-Etch Silane Primer: Reactivity and Bonding with a Lithium Disilicate Ceramic

scientific article published on 31 January 2020

Sequential software processing of micro-XCT dental-images for 3D-FE analysis.

scientific article

Shrinkage Stresses Generated during Resin-Composite Applications: A Review

scientific article

Shrinkage behaviour of flowable resin-composites related to conversion and filler-fraction

scientific article published on 26 June 2007

Shrinkage, stress, and modulus of dimethacrylate, ormocer, and silorane composites

scientific article

Simultaneous Evaluation of Creep Deformation and Recovery of Bulk-Fill Dental Composites Immersed in Food-Simulating Liquids

scientific article published on 10 July 2018

Surface and bulk properties of dental resin- composites after solvent storage.

scientific article

Surface characterization of precious alloys treated with thione metal primers

scientific article published on 27 July 2006

Surface characterization of zirconia dental implants

scientific article published on 16 December 2009

Surface fine structure of treated dentine investigated with tapping mode atomic force microscopy (TMAFM)

scientific article published on 01 February 1999

Surface integrity of solvent-challenged ormocer-matrix composite

scientific article published on 18 November 2010

Temperature-dependence of creep behaviour of dental resin-composites

scientific article published on 01 December 2012

Tensile properties of orthodontic elastomeric chains

scientific article published in April 2004

The Effect of Cyclic Loading on the Compressive Strength of Core Build-Up Materials

scientific article

The effect of chewing simulation on surface roughness of resin composite when opposed by zirconia ceramic and lithium disilicate ceramic.

scientific article published on 23 November 2017

The influence of nanoscale inorganic content over optical and surface properties of model composites.

scientific article

The relationship between cyclic hygroscopic dimensional changes and water sorption/desorption of self-adhering and new resin-matrix composites.

scientific article

Time-dependent visco-elastic creep and recovery of flowable composites

scientific article published on 01 December 2007

Titanium orthodontic brackets: structure, composition, hardness and ionic release.

scientific article

Toward optimizing dental implant performance: Surface characterization of Ti and TiZr implant materials.

scientific article published on 9 November 2016

Viscoelastic properties of orthodontic adhesives used for lingual fixed retainer bonding.

scientific article published on 18 October 2016

Viscoelastic stability of resin-composites under static and dynamic loading

scientific article published on 27 December 2011

Water sorption and solubility of core build-up materials.

scientific article published on 7 September 2014