List of works - Catherine J. Noakes

A Multicompartment SIS Stochastic Model with Zonal Ventilation for the Spread of Nosocomial Infections: Detection, Outbreak Management, and Infection Control

scientific article published on 29 March 2019

A paradigm shift to combat indoor respiratory infection

scientific article published on 14 May 2021

Aerosol-Transmitted Infections—a New Consideration for Public Health and Infection Control Teams ⬇️

article

Air Ion Behavior in Ventilated Rooms ⬇️

article published in 2008

An Effective Surrogate Tracer Technique for S. aureus Bioaerosols in a Mechanically Ventilated Hospital Room Replica Using Dilute Aqueous Lithium Chloride ⬇️

An assessment of, and response to, potential cross-contamination routes due to defective appliance water trap seals in building drainage systems

article

Analysing wireless EEG based functional connectivity measures with respect to change in environmental factors ⬇️

article published in 2016

Application of CFD simulation to predicting upper-room UVGI effectiveness ⬇️

scientific article published on 28 November 2012

Bacterial Transfer To Fingertips During Sequential Surface Contacts With And Without Gloves

scientific article published on 24 April 2020

Bactericidal action of positive and negative ions in air. ⬇️

scientific article

Bioaerosol deposition in single and two-bed hospital rooms: A numerical and experimental study ⬇️

CFD simulation of airborne pathogen transport due to human activities ⬇️

scientific article published on 17 June 2011

COVID-19 and non-traditional mask use: How do various materials compare in reducing the infection risk for mask wearers?

scientific article published on 02 June 2020

Chemical versus biological contamination indoors: trade-offs versus win-win opportunities for improving indoor air quality

scientific article

Computational fluid dynamics analysis to assess performance variability of in-duct UV-C systems ⬇️

article by Azael Capetillo et al published 2 January 2015 in Science and Technology for the Built Environment

Computational fluid dynamics modelling and optimisation of an upper-room ultraviolet germicidal irradiation system in a naturally ventilated hospital ward ⬇️

Development of a numerical model to simulate the biological inactivation of airborne microorganisms in the presence of ultraviolet light

article

Development of a numerical optimization approach to ventilation system design to control airborne contaminant dispersion and occupant comfort ⬇️

article

Effect of negative air ions on the potential for bacterial contamination of plastic medical equipment ⬇️

scientific article

Engineering control of respiratory infection and low-energy design of healthcare facilities ⬇️

article

Evaluating a transfer gradient assumption in a fomite-mediated microbial transmission model using an experimental and Bayesian approach

scientific article published on 24 June 2020

Excising Infection in the Surgical Environment (ExISE) ⬇️

Field assessment of bacterial communities and total trihalomethanes: Implications for drinking water networks. ⬇️

scientific article published on 7 November 2017

Field measurement of natural ventilation rate in an idealised full-scale building located in a staggered urban array: Comparison between tracer gas and pressure-based methods ⬇️

Functional recovery of a resilient hospital type ⬇️

How can airborne transmission of COVID-19 indoors be minimised?

scientific article published on 27 May 2020

Influence of neighbouring structures on building façade pressures: Comparison between full-scale, wind-tunnel, CFD and practitioner guidelines

scientific article published in June 2019

Influence of ventilation use and occupant behaviour on surface microorganisms in contemporary social housing

scientific article published on 16 July 2020

Investigating the influence of neighbouring structures on natural ventilation potential of a full-scale cubical building using time-dependent CFD

Is there a relationship between airborne and surface microbes in the critical care environment?

scientific article published on 9 April 2018

Mathematical models for assessing the role of airflow on the risk of airborne infection in hospital wards

scientific article

Measurement of ventilation and airborne infection risk in large naturally ventilated hospital wards ⬇️

article published in 2013

Meta-Model Based Optimization of Building Thermal Performance Incorporating Local Comfort Analysis

Methodology for determining the susceptibility of airborne microorganisms to irradiation by an upper-room UVGI system ⬇️

Minimal transmission in an influenza A (H3N2) human challenge-transmission model within a controlled exposure environment

scientific article published on 13 July 2020

Modeling environmental contamination in hospital single- and four-bed rooms ⬇️

scientific article

Modeling infection risk and energy use of upper-room Ultraviolet Germicidal Irradiation systems in multi-room environments ⬇️

article published in 2015

Modelling the Performance of Upper Room Ultraviolet Germicidal Irradiation Devices in Ventilated Rooms: Comparison of Analytical and CFD Methods ⬇️

Modelling the risk of infection transmission due to environmental contamination in hospital single and multi-bed rooms

scientific article

Modelling the transmission of airborne infections in enclosed spaces. ⬇️

scientific article published on 14 February 2006

Modelling urban airflow and natural ventilation using a GPU-based lattice-Boltzmann method ⬇️

Observing and quantifying airflows in the infection control of aerosol- and airborne-transmitted diseases: an overview of approaches

scientific article published on 30 December 2010

Optimized implementation of the Lattice Boltzmann Method on a graphics processing unit towards real-time fluid simulation

article

Peruvian lessons to inform Bradford pilot

scientific article published on 01 May 2008

Pilot-scale biofiltration at a materials recovery facility: The impact on bioaerosol control ⬇️

scientific article published on 10 September 2018

Practical Indicators for Risk of Airborne Transmission in Shared Indoor Environments and Their Application to COVID-19 Outbreaks

scientific article published on 5 January 2022

Quantitative aerobiologic analysis of an influenza human challenge-transmission trial

scientific article published on 15 June 2020

Real-time flow simulation of indoor environments using lattice Boltzmann method ⬇️

article

Relationship between healthcare worker surface contacts, care type and hand hygiene: an observational study in a single-bed hospital ward. ⬇️

scientific article published on 13 May 2016

Respirators, face masks, and their risk reductions via multiple transmission routes for first responders within an ambulance

journal article published in 2021

The Role of Nursing Activities on the Bioaerosol Production in Hospital Wards ⬇️

article

The detection of airborne transmission of tuberculosis from HIV-infected patients, using an in vivo air sampling model. ⬇️

scientific article

The infectiousness of tuberculosis patients coinfected with HIV ⬇️

scientific article

The influence of nurse cohorting on hand hygiene effectiveness ⬇️

scientific article published on December 2006

The transmission of tuberculosis in confined spaces: an analytical review of alternative epidemiological models

scientific article published on November 2003

The ventilation of multiple-bed hospital wards: review and analysis

scientific article published on May 2008

Transmission of SARS-CoV-2 by inhalation of respiratory aerosol in the Skagit Valley Chorale superspreading event

scientific article published on 26 September 2020

Upper-room ultraviolet light and negative air ionization to prevent tuberculosis transmission ⬇️

scientific article

Use of CFD Analysis in Modifying a TB Ward in Lima, Peru

article

Use of CFD Modelling to Optimise the Design of Upper-room UVGI Disinfection Systems for Ventilated Rooms ⬇️

article

Why is mock care not a good proxy for predicting hand contamination during patient care?

scientific article published on 30 November 2020

List of works by Catherine J. Noakes

A Multicompartment SIS Stochastic Model with Zonal Ventilation for the Spread of Nosocomial Infections: Detection, Outbreak Management, and Infection Control

A paradigm shift to combat indoor respiratory infection

Aerosol-Transmitted Infections—a New Consideration for Public Health and Infection Control Teams ⬇️

Air Ion Behavior in Ventilated Rooms ⬇️

An Effective Surrogate Tracer Technique for S. aureus Bioaerosols in a Mechanically Ventilated Hospital Room Replica Using Dilute Aqueous Lithium Chloride ⬇️

An assessment of, and response to, potential cross-contamination routes due to defective appliance water trap seals in building drainage systems

Analysing wireless EEG based functional connectivity measures with respect to change in environmental factors ⬇️

Application of CFD simulation to predicting upper-room UVGI effectiveness ⬇️

Bacterial Transfer To Fingertips During Sequential Surface Contacts With And Without Gloves

Bactericidal action of positive and negative ions in air. ⬇️

Bioaerosol deposition in single and two-bed hospital rooms: A numerical and experimental study ⬇️

CFD simulation of airborne pathogen transport due to human activities ⬇️

COVID-19 and non-traditional mask use: How do various materials compare in reducing the infection risk for mask wearers?

Chemical versus biological contamination indoors: trade-offs versus win-win opportunities for improving indoor air quality

Computational fluid dynamics analysis to assess performance variability of in-duct UV-C systems ⬇️

Computational fluid dynamics modelling and optimisation of an upper-room ultraviolet germicidal irradiation system in a naturally ventilated hospital ward ⬇️

Development of a numerical model to simulate the biological inactivation of airborne microorganisms in the presence of ultraviolet light

Development of a numerical optimization approach to ventilation system design to control airborne contaminant dispersion and occupant comfort ⬇️

Effect of negative air ions on the potential for bacterial contamination of plastic medical equipment ⬇️

Engineering control of respiratory infection and low-energy design of healthcare facilities ⬇️

Evaluating a transfer gradient assumption in a fomite-mediated microbial transmission model using an experimental and Bayesian approach

Excising Infection in the Surgical Environment (ExISE) ⬇️

Field assessment of bacterial communities and total trihalomethanes: Implications for drinking water networks. ⬇️

Field measurement of natural ventilation rate in an idealised full-scale building located in a staggered urban array: Comparison between tracer gas and pressure-based methods ⬇️

Functional recovery of a resilient hospital type ⬇️

How can airborne transmission of COVID-19 indoors be minimised?

Influence of neighbouring structures on building façade pressures: Comparison between full-scale, wind-tunnel, CFD and practitioner guidelines

Influence of ventilation use and occupant behaviour on surface microorganisms in contemporary social housing

Investigating the influence of neighbouring structures on natural ventilation potential of a full-scale cubical building using time-dependent CFD

Is there a relationship between airborne and surface microbes in the critical care environment?

Mathematical models for assessing the role of airflow on the risk of airborne infection in hospital wards

Measurement of ventilation and airborne infection risk in large naturally ventilated hospital wards ⬇️

Meta-Model Based Optimization of Building Thermal Performance Incorporating Local Comfort Analysis

Methodology for determining the susceptibility of airborne microorganisms to irradiation by an upper-room UVGI system ⬇️

Minimal transmission in an influenza A (H3N2) human challenge-transmission model within a controlled exposure environment

Modeling environmental contamination in hospital single- and four-bed rooms ⬇️

Modeling infection risk and energy use of upper-room Ultraviolet Germicidal Irradiation systems in multi-room environments ⬇️

Modelling the Performance of Upper Room Ultraviolet Germicidal Irradiation Devices in Ventilated Rooms: Comparison of Analytical and CFD Methods ⬇️

Modelling the risk of infection transmission due to environmental contamination in hospital single and multi-bed rooms

Modelling the transmission of airborne infections in enclosed spaces. ⬇️

Modelling urban airflow and natural ventilation using a GPU-based lattice-Boltzmann method ⬇️

Observing and quantifying airflows in the infection control of aerosol- and airborne-transmitted diseases: an overview of approaches

Optimized implementation of the Lattice Boltzmann Method on a graphics processing unit towards real-time fluid simulation

Peruvian lessons to inform Bradford pilot

Pilot-scale biofiltration at a materials recovery facility: The impact on bioaerosol control ⬇️

Practical Indicators for Risk of Airborne Transmission in Shared Indoor Environments and Their Application to COVID-19 Outbreaks

Quantitative aerobiologic analysis of an influenza human challenge-transmission trial

Real-time flow simulation of indoor environments using lattice Boltzmann method ⬇️

Relationship between healthcare worker surface contacts, care type and hand hygiene: an observational study in a single-bed hospital ward. ⬇️

Respirators, face masks, and their risk reductions via multiple transmission routes for first responders within an ambulance

The Role of Nursing Activities on the Bioaerosol Production in Hospital Wards ⬇️

The detection of airborne transmission of tuberculosis from HIV-infected patients, using an in vivo air sampling model. ⬇️

The infectiousness of tuberculosis patients coinfected with HIV ⬇️

The influence of nurse cohorting on hand hygiene effectiveness ⬇️

The transmission of tuberculosis in confined spaces: an analytical review of alternative epidemiological models

The ventilation of multiple-bed hospital wards: review and analysis

Transmission of SARS-CoV-2 by inhalation of respiratory aerosol in the Skagit Valley Chorale superspreading event

Upper-room ultraviolet light and negative air ionization to prevent tuberculosis transmission ⬇️

Use of CFD Analysis in Modifying a TB Ward in Lima, Peru

Use of CFD Modelling to Optimise the Design of Upper-room UVGI Disinfection Systems for Ventilated Rooms ⬇️

Why is mock care not a good proxy for predicting hand contamination during patient care?