3D printed agglomerates for granule breakage tests ⬇️

article published in 2017

A comparative analysis of particle tracking in a mixer by discrete element method and positron emission particle tracking ⬇️

A comparative study on hydrogen production from steam-glycerol reforming: thermodynamics and experimental

article

A linear model of elasto-plastic and adhesive contact deformation ⬇️

article

A method for grindability testing using the Scirocco disperser ⬇️

scientific article published on 28 January 2016

A methodology for calibration of DEM input parameters in simulation of segregation of powder mixtures, a special focus on adhesion ⬇️

A new contact model for modelling of elastic-plastic-adhesive spheres in distinct element method ⬇️

article

A one-dimensional plug-flow model of a counter-current spray drying tower

article

A review of bulk powder caking ⬇️

article

Analysis of Minor Component Segregation in Ternary Powder Mixtures ⬇️

Analysis of Pin Milling of Pharmaceutical Materials ⬇️

Analysis of Segregation of Binary Mixtures of Particulate Solids

Analysis of Tribo-Electric Charging of Spherical Beads Using Distinct Element Method

Analysis of aerodynamic dispersion of cohesive clusters

article

Analysis of ball indentation on cohesive powder beds using distinct element modelling

Analysis of flowability of cohesive powders using Distinct Element Method ⬇️

Analysis of granule breakage in a rotary mixing drum: Experimental study and distinct element analysis

article

Analysis of milling of dry compacted ribbons by distinct element method ⬇️

scholarly article by Colin Hare et al published July 2016 in Chemical Engineering Science

Analysis of partial electrocoalescence by Level-Set and finite element methods ⬇️

Analysis of particle motion in a paddle mixer using Discrete Element Method (DEM)

article

Analysis of powder rheometry of FT4: Effect of air flow ⬇️

scholarly article by Wenguang Nan et al published April 2017 in Chemical Engineering Science

Analysis of powder rheometry of FT4: Effect of particle shape

Analysis of seed processing by the distinct element method ⬇️

Analysis of seeded granulation in high shear granulators by discrete element method

Analysis of the dynamics of the FT4 powder rheometer ⬇️

article

Assessing flowability of small quantities of cohesive powder using distinct element modelling ⬇️

Assessment of Near-Infrared (NIR) spectroscopy for segregation measurement of low content level ingredients ⬇️

scientific article

Assessment of impact breakage of carbamazepine dihydrate due to aerodynamic dispersion

scientific article published on 09 November 2019

Assessment of surface caking of powders using the ball indentation method ⬇️

scientific article published on 16 February 2017

Attrition of paracetamol and aspirin under bulk shear deformation ⬇️

scholarly article by Colin Hare & Mojtaba Ghadiri published March 2015 in Chemical Engineering Science

Auto-granulation of Fine Cohesive Powder by Mechanical Vibration ⬇️

article

Ball indentation on powder beds for assessing powder flowability: Analysis of operation window ⬇️

CFD Simulation of a Counter-current Spray Drying Tower with Stochastic Treatment of Particle-wall Collision ⬇️

CFD modeling of a pilot-scale countercurrent spray drying tower for the manufacture of detergent powder ⬇️

Chapter 19 Analysis of Agglomerate Breakage

Characterisation of Flowability of Loosely Compacted Cohesive Powders by Indentation

Characterisation of flowability of cohesive powders by testing small quantities of weak compacts

article by Chuan Wang et al published August 2008 in Particuology: science and technology of particles

Comparison of cohesive powder flowability measured by Schulze Shear Cell, Raining Bed Method, Sevilla Powder Tester and new Ball Indentation Method ⬇️

Correction to “Analysis of the Dynamics of the FT4 Powder Rheometer” [Powder Technol. 285 (2015) 123–127] ⬇️

article

Critical electric field strength for partial coalescence of droplets on oil–water interface under DC electric field ⬇️

DEM analysis of the effect of particle shape, cohesion and strain rate on powder rheometry ⬇️

Discrete Element Method (DEM) Simulation of Powder Mixing Process

Distinct element analysis and experimental evaluation of the Heckel analysis of bulk powder compression

article

Distinct element analysis of inter-particle coating variability in a batch seed coater ⬇️

Distinct element analysis of the effect of temperature on the bulk crushing of α-lactose monohydrate

article published in 2003

Drop test: A new method to measure the particle adhesion force ⬇️

article published in 2014

Droplet deformation under pulsatile electric fields ⬇️

scientific article

Editorial

May 2011 column in Chemical Engineering Research and Design

Effect of Structure on Strength of Agglomerates using Distinct Element Method ⬇️

Effect of granulation scale-up on the strength of granules

Effect of mechanical vibration on the size and microstructure of titania granules produced by auto-granulation ⬇️

article

Effect of mill type on the size reduction and phase transformation of gamma alumina ⬇️

Effect of particle roughness on the bulk deformation using coupled boundary element and discrete element methods

scientific article

Effect of particle shape on flow in discrete element method simulation of a rotary batch seed coater ⬇️

Effect of size ratio on the behaviour of agglomerates embedded in a bed of particles subjected to shearing: DEM analysis

article

Effect of surfactants on the deformation and break-up of an aqueous drop in oils under high electric field strengths ⬇️

Effect of temperature on the energy utilisation in quasi-static crushing of α-lactose monohydrate

Electrocoalescence of water drop trains in oil under constant and pulsatile electric fields ⬇️

Electrostatic phase separation: A review ⬇️

article

Evaluation of a new dispersion technique for assessing triboelectric charging of powders ⬇️

scientific article published on 27 March 2018

Experimental evaluation of the effect of particle properties on the segregation of ternary powder mixtures ⬇️

Experimental study of the deformation and breakage of 3D printed agglomerates: Effects of packing density and inter-particle bond strength ⬇️

Fluid-particle energy transfer in spiral jet milling ⬇️

Hydrogen production by sorption-enhanced steam reforming of glycerol ⬇️

scientific article

Impact attrition of spray-dried burkeite particles ⬇️

Impact breakage of pharmaceutical tablets ⬇️

scientific article

Impact strength distribution of placebo enzyme granules ⬇️

Influence of interface energy of primary particles on the deformation and breakage behaviour of agglomerates sheared in a powder bed

Instantaneous Monitoring of Drill Bit Wear and Specific Energy as a Criteria for the Appropriate Time for Pulling Out Worn Bits

Inter-particle coating variability in a rotary batch seed coater ⬇️

Jamming during particle spreading in additive manufacturing ⬇️

Linear dynamics modelling of droplet deformation in a pulsatile electric field ⬇️

Mechanical Failure of Grains in Sheared Granular Media: Effect of Size Ratio

Mechanistic Analysis and Computer Simulation of the Aerodynamic Dispersion of Loose Aggregates: Effect of Surface Energy

Mechanistic analysis and computer simulation of impact breakage of agglomerates: Effect of surface energy ⬇️

Mechanistic analysis and computer simulation of the aerodynamic dispersion of loose aggregates

article

Modeling of agglomerate behavior under shear deformation: effect of velocity field of a high shear mixer granulator on the structure of agglomerates

article published in 2007

Modelling of auto-agglomeration of cohesive powders ⬇️

New instrument for tribocharge measurement due to single particle impacts

scientific article

Numerical Analysis of the Effect of Particle Shape and Adhesion on the Segregation of Powder Mixtures ⬇️

Numerical analysis of air effect on the powder flow dynamics in the FT4 Powder Rheometer ⬇️

article

Numerical analysis of strain rate sensitivity in ball indentation on cohesive powder Beds ⬇️

Numerical simulation of powder flow during spreading in additive manufacturing ⬇️

Particle Breakage in Agitated Dryers

Particle Breakage in a Scirocco Disperser ⬇️

Prediction of attrition in agitated particle beds ⬇️

Prediction of bulk particle breakage due to naturally formed shear bands ⬇️

Progress in low temperature hydrogen production with simultaneous CO2 abatement

article

Promising solid electrolyte material for an IT-SOFC: crystal structure of the cerium gadolinium holmium oxide Ce0.8Gd0.1Ho0.1O1.9 between 295 and 1023 K. ⬇️

scientific article

Relationship between surface area coverage of flow-aids and flowability of cohesive particles

article

Residence time distribution of glass ballotini in isothermal swirling flows in a counter-current spray drying tower ⬇️

Scale-up of High-Shear Mixer Granulators

Shear deformation of binary mixtures of dry particulate solids

article published in 2004

Single and bulk compressions of soft granules: Experimental study and DEM evaluation

Size measurement of dry ice particles produced from liquid carbon dioxide

Special issue: Foreword - 7th International Granulation Workshop ⬇️

Steam reforming of crude glycerol with in situ CO(2) sorption. ⬇️

scientific article

Stress and strain rate analysis of the FT4 Powder Rheometer ⬇️

Structural study of holmium zirconate nanoparticles obtained through carbon neutral sol-gel process

The breakage behaviour of Aspirin under quasi-static indentation and single particle impact loading: Effect of crystallographic anisotropy ⬇️

scientific article published on April 3, 2011

The effect of particle shape on predicted segregation in binary powder mixtures ⬇️

The influence of aspect ratio and roughness on flowability

Triboelectrification of pharmaceutical powders by particle impact

scientific article (publication date: 4 April 2007)