A GPU-based coupled SPH-DEM method for particle-fluid flow with free surfaces ⬇️

A Study of Commercial Nanoparticulate γ-Al2O3Catalyst Supports

A comparative analysis of particle tracking in a mixer by discrete element method and positron emission particle tracking ⬇️

A linear model of elasto-plastic and adhesive contact deformation ⬇️

article

A magnetically separable SO 4 /Fe-Al-TiO 2 solid acid catalyst for biodiesel production from waste cooking oil ⬇️

article published in 2018

A methodology for calibration of DEM input parameters in simulation of segregation of powder mixtures, a special focus on adhesion ⬇️

A new contact model for modelling of elastic-plastic-adhesive spheres in distinct element method ⬇️

article

A numerical model for calculation of the restitution coefficient of elastic-perfectly plastic and adhesive bodies with rough surfaces ⬇️

A review of current techniques for the evaluation of powder mixing ⬇️

article

Advances in nano-catalysts based biodiesel production from non-food feedstocks

scientific article published on 29 August 2019

An investigation on process of seeded granulation in a continuous drum granulator using DEM ⬇️

An investigation on the evolution of granule formation by in-process sampling of a high shear granulator ⬇️

Analysis of Minor Component Segregation in Ternary Powder Mixtures ⬇️

Analysis of Segregation of Binary Mixtures of Particulate Solids

Analysis of Tribo-Electric Charging of Spherical Beads Using Distinct Element Method

Analysis of aerodynamic dispersion of cohesive clusters

article

Analysis of ball indentation on cohesive powder beds using distinct element modelling

Analysis of bulk compression behaviour of pharmaceutical particles

doctoral thesis

Analysis of granule breakage in a rotary mixing drum: Experimental study and distinct element analysis

article

Analysis of particle motion in a paddle mixer using Discrete Element Method (DEM)

article

Analysis of seeded granulation in high shear granulators by discrete element method

Assessing flowability of small quantities of cohesive powder using distinct element modelling ⬇️

Assessment of Near-Infrared (NIR) spectroscopy for segregation measurement of low content level ingredients ⬇️

scientific article

Ball indentation on powder beds for assessing powder flowability: Analysis of operation window ⬇️

Biodiesel production from used cooking oil using a novel surface functionalised TiO 2 nano-catalyst ⬇️

scholarly article by Jabbar Gardy et al published June 2017 in Applied Catalysis B: Environmental

Chapter 19 Analysis of Agglomerate Breakage

Characterisation of Flowability of Loosely Compacted Cohesive Powders by Indentation

Characterisation of flowability of cohesive powders by testing small quantities of weak compacts

article by Chuan Wang et al published August 2008 in Particuology: science and technology of particles

Characterisation of polyphosphate coated aluminium-doped titania nanoparticles during milling

scientific article published on 04 April 2019

Coupling CFD-DEM with dynamic meshing: A new approach for fluid-structure interaction in particle-fluid flows ⬇️

Discrete Element Method (DEM) Simulation of Powder Mixing Process

Discrete Element Method Applications in Process Engineering

Distinct element analysis and experimental evaluation of the Heckel analysis of bulk powder compression

article

Distinct element analysis of the effect of temperature on the bulk crushing of α-lactose monohydrate

article published in 2003

Drop test: A new method to measure the particle adhesion force ⬇️

article published in 2014

Editorial

May 2011 column in Chemical Engineering Research and Design

Effect of Platelet Rich Plasma Combined with Chitosan Biodegradable Film on Full-Thickness Wound Healing in Rat Model

scientific article published on January 2016

Effect of Reynolds number on particle interaction and agglomeration in turbulent channel flow ⬇️

Effect of granulation scale-up on the strength of granules

Effect of mill type on the size reduction and phase transformation of gamma alumina ⬇️

Effect of size ratio on the behaviour of agglomerates embedded in a bed of particles subjected to shearing: DEM analysis

article

Effect of surfactants on the deformation and break-up of an aqueous drop in oils under high electric field strengths ⬇️

Effect of temperature on the energy utilisation in quasi-static crushing of α-lactose monohydrate

Electrostatic phase separation: A review ⬇️

article

Evaluating the Wear of Polycrystalline Diamond Compact Drill Bit Cutters using Indentation and Scratch Tests ⬇️

Evolution of surface micro-structure and moisture sorption characteristics of spray-dried detergent powders

scientific article published on 23 April 2019

Experimental evaluation of the effect of particle properties on the segregation of ternary powder mixtures ⬇️

Flowability assessment of weakly consolidated powders ⬇️

Fluid-particle energy transfer in spiral jet milling ⬇️

Fully coupled LES-DEM of particle interaction and agglomeration in a turbulent channel flow ⬇️

Impact of shape representation schemes used in discrete element modelling of particle packing ⬇️

Influence of contact stiffnesses on the micromechanical characteristics of dense particulate systems subjected to shearing

Influence of interface energy of primary particles on the deformation and breakage behaviour of agglomerates sheared in a powder bed

Instantaneous Monitoring of Drill Bit Wear and Specific Energy as a Criteria for the Appropriate Time for Pulling Out Worn Bits

Linear dynamics modelling of droplet deformation in a pulsatile electric field ⬇️

Mechanical Failure of Grains in Sheared Granular Media: Effect of Size Ratio

Mechanistic Analysis and Computer Simulation of the Aerodynamic Dispersion of Loose Aggregates: Effect of Surface Energy

Mechanistic analysis and computer simulation of the aerodynamic dispersion of loose aggregates

article

Modeling of agglomerate behavior under shear deformation: effect of velocity field of a high shear mixer granulator on the structure of agglomerates

article published in 2007

Novel draw solution for forward osmosis based solar desalination ⬇️

Numerical Analysis of the Effect of Particle Shape and Adhesion on the Segregation of Powder Mixtures ⬇️

Numerical analysis of strain rate sensitivity in ball indentation on cohesive powder Beds ⬇️

On the Compressibility of Gas Diffusion Layers in Proton Exchange Membrane Fuel Cells

Particle Agglomeration and Dispersion in Fully-coupled Turbulent Channel Flow Using Large Eddy Simulation and Discrete Element Method ⬇️

Particle-Interaction Effects in Turbulent Channel Flow ⬇️

Pore Volume Analysis of Gas Shale Samples Using 3-D X-ray Micro Tomography

Prediction of permeability of realistic and virtual layered nonwovens using combined application of X-ray μ CT and computer simulation ⬇️

Reynolds Number Effects on Particle Agglomeration in Turbulent Channel Flow ⬇️

Rheology of moist food powders as affected by moisture content ⬇️

Salt enhanced solvent relaxation and particle surface area determination via rapid spin-lattice NMR ⬇️

Scale-up of High-Shear Mixer Granulators

Shear deformation of binary mixtures of dry particulate solids

article published in 2004

Single and bulk compressions of soft granules: Experimental study and DEM evaluation

Special issue: Foreword - 7th International Granulation Workshop ⬇️

Synthesis of Ti(SO 4 )O solid acid nano-catalyst and its application for biodiesel production from used cooking oil ⬇️

scholarly article by Jabbar Gardy et al published October 2016 in Applied Catalysis A: General

The effect of particle shape on predicted segregation in binary powder mixtures ⬇️

Urea Finishing Process: Prilling Versus Granulation ⬇️