Search filters

List of works by Laurent Gremillard

3-D printing of chitosan-calcium phosphate inks: rheology, interactions and characterization

scientific article published on 29 December 2018

3D-Characterization of the veneer–zirconia interface using FIB nano-tomography

scientific article published on 08 December 2012

A Comparative Study between Melt-Derived and Sol-Gel Synthesized 45S5 Bioactive Glasses

A critical comparison of methods for the determination of the aging sensitivity in biomedical grade yttria-stabilized zirconia

scientific article published on 01 February 2005

A fast, stepwise procedure to assess time-temperature equivalence for hydrothermal ageing of zirconia-based materials

article by Laurent Gremillard et al published January 2018 in Journal of the European Ceramic Society

A global investigation into in situ nanoindentation experiments on zirconia: from the sample geometry optimization to the stress nanolocalization using convergent beam electron diffraction.

scientific article

A new method to measure monoclinic depth profile in zirconia-based ceramics from X-ray diffraction data

A new testing protocol for zirconia dental implants

scientific article published on 26 September 2014

A testing protocol combining shocks, hydrothermal ageing and friction, applied to Zirconia Toughened Alumina (ZTA) hip implants.

scientific article published on 19 September 2016

Accurate characterization of pure silicon-substituted hydroxyapatite powders synthesized by a new precipitation route

Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications

scientific article published on 26 March 2018

Assessment of ultrathin yttria-stabilized zirconia foils for biomedical applications

Atomic force microscopy study of the tetragonal to monoclinic transformation behavior of silica doped yttria-stabilized zirconia

article published in 2005

Can (Mg,Y)-PSZ-Spinel composites be a valuable option for dental application?

Ceramics for medical applications: A picture for the next 20 years

Characterization of 100Cr6 lattice structures produced by robocasting

Characterization of materials and their interfaces in a direct bonded copper substrate for power electronics applications

Combining ageing and wear to assess the durability of zirconia-based ceramic heads for total hip arthroplasty

scientific article published on 26 March 2013

Composites organiques-inorganiques pour la substitution et la réparation osseuse : concepts, premiers résultats et potentialités

Degradation of Bioceramics

Degradation of alumina and zirconia toughened alumina (ZTA) hip prostheses tested under microseparation conditions in a shock device

Direct silanization of zirconia for increased biointegration.

scientific article

Effect of cooling rate on the location and chemistry of glassy phases in silica-doped 3Y-TZP ceramics

Effect of different surface treatments on the hydrothermal degradation of a 3Y-TZP ceramic for dental implants.

scientific article published on 10 August 2014

Effect of grain orientation and magnesium doping on β-tricalcium phosphate resorption behavior

scientific article published on 01 March 2019

Effect of spark plasma sintering of alumina nanopowder on the mechanical properties

Effect of the wick characteristics on the thermal behaviour of a LHP capillary evaporator

Effects of Ca-, Mg- and Si-doping on microstructures of alumina–zirconia composites

Effects of in vitro shocks and hydrothermal degradation on wear of ceramic hip joints: Towards better experimental simulation of in vivo ageing

Elaboration of self-coating alumina-based porous ceramics

Epitaxial growth of tungsten nanoparticles on alumina and spinel surfaces.

scientific article published on 21 April 2008

Evaluation of a new press-fit in situ setting composite porous scaffold for cancellous bone repair: Towards a “surgeon-friendly” bone filler?

scientific article published on 15 March 2010

Evidence for the formation of distorted nanodomains involved in the phase transformation of stabilized zirconia by coupling convergent beam electron diffraction and in situ TEM nanoindentation

Fracture behavior of robocast HA/β-TCP scaffolds studied by X-ray tomography and finite element modeling

How do the grains slide in fine-grained zirconia polycrystals at high temperature?

Human primary osteoblast behaviour on microrough zirconia-toughened alumina and on selectively etched microrough zirconia-toughened alumina

Ice shaping properties, similar to that of antifreeze proteins, of a zirconium acetate complex

scientific article

Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia

scientific article published on 02 December 2005

Interfaces in graded coatings on titanium-based implants

scientific article published on March 2009

Low-Temperature Degradation of Zirconia and Implications for Biomedical Implants

Low-temperature degradation in zirconia with a porous surface

scientific article

Mechanical properties and cytocompatibility of poly(ε-caprolactone)-infiltrated biphasic calcium phosphate scaffolds with bimodal pore distribution

scientific article published on 27 May 2010

Microstructural control of modular peptide release from microporous biphasic calcium phosphate

scientific article published on 19 November 2016

Microstructural study of silica-doped zirconia ceramics

article published in 2000

Modeling and in-situ evaluation of thermal gradients during sintering of large ceramic balls

Modeling the aging kinetics of zirconia ceramics

Mécanisme multiphysique de dégradation des zircones orthopédiques : couplage entre vieillissement hydrothermal et frottement en simulateur de hanche

Near-infrared radiative properties of porous zirconia ceramics

Oxidation of φ′-aluminium oxynitride

Preparation of porous hydroxyapatite scaffolds

Reliability assessment in advanced nanocomposite materials for orthopaedic applications.

scientific article published on 2 November 2010

Robocast zirconia-toughened alumina scaffolds: Processing, structural characterisation and interaction with human primary osteoblasts

Role of titanium on the reactive spreading of lead-free solders on alumina

scholarly article by Laurent Gremillard et al published December 2006 in Journal of Materials Research

Selective etching of injection molded zirconia-toughened alumina: Towards osseointegrated and antibacterial ceramic implants

scientific article published on 14 September 2016

Sintering behavior of lanthanide-containing glass-ceramic sealants for solid oxide fuel cells

Sintering behaviour of 45S5 bioactive glass

scientific article published on 05 June 2008

Sintering behaviour of diopside (CaO∙MgO∙2SiO2)–fluorapatite (9CaO∙3P2O5∙CaF2) bioactive glass

Sintering, crystallisation and biodegradation behaviour of Bioglass-derived glass-ceramics

scientific article

Structural transformations of bioactive glass 45S5 with thermal treatments

article published in 2007

The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends

article published in 2009

The in vitro evolution of resorbable brushite cements: A physico-chemical, micro-structural and mechanical study

scientific article

The influence of stresses on ageing kinetics of 3Y- and 4Y- stabilized zirconia

Thermal shock resistance of two micro-structured alumina obtained by natural sintering and SPS

Thermomechanical properties and fracture mechanisms of calcium hexaluminate

Toughening of bio-ceramics scaffolds by polymer coating

Towards the prediction of hydrothermal ageing of 3Y-TZP bioceramics from processing parameters

Wear study of Total Ankle Replacement explants by microstructural analysis

scientific article published on 12 January 2016

Paulina is supported by:

About Paulina

Help