Search filters

List of works by Michael Wendler

Bonding performance of universal adhesives in different etching modes

scientific article

Chairside CAD/CAM materials. Part 1: Measurement of elastic constants and microstructural characterization.

scientific article published on 24 November 2016

Chairside CAD/CAM materials. Part 2: Flexural strength testing.

scientific article

Chairside CAD/CAM materials. Part 3: Cyclic fatigue parameters and lifetime predictions

scientific article

Characterization of residual stresses in zirconia veneered bilayers assessed via sharp and blunt indentation.

scientific article published on 30 May 2015

Descriptions of crack growth behaviors in glass-ZrO2 bilayers under thermal residual stresses

scientific article published on 13 July 2016

Factors influencing development of residual stresses during crystallization firing in a novel lithium silicate glass-ceramic

scientific article published on 28 March 2019

Fractographic analysis of lithium silicate crown failures during sintering

scientific article published on 21 March 2019

Fracture anisotropy in texturized lithium disilicate glass-ceramics

In vitro lifetime of zirconium dioxide-based crowns veneered using Rapid Layer Technology

scientific article published on 16 January 2019

Mixed-mode fracture toughness of texturized LS2 glass-ceramics using the three-point bending with eccentric notch test

scientific article published on 7 October 2017

Practical and theoretical considerations on the fracture toughness testing of dental restorative materials.

scientific article published in December 2017

Repair Bond Strength of Aged Resin Composite after Different Surface and Bonding Treatments.

scientific article published on 7 July 2016

Sliding contact wear and subsurface damage of CAD/CAM materials against zirconia

scientific article published on 30 January 2020

Spatial distribution of residual stresses in glass-ZrO2 sphero-cylindrical bilayers.

scientific article published on 24 March 2016