36th Risø International Symposium on Materials Science

scholarly article by S Fæster et al published 7 August 2015 in IOP Conference Series: Materials Science and Engineering

3D Characterization of Recrystallization Boundaries

3D Spatial Distribution of Nuclei in 90% Cold Rolled Aluminium

article

3D X-RAY DIFFRACTION MICROSCOPY

4D Study of Grain Growth in Armco Iron Using Laboratory X-ray Diffraction Contrast Tomography

A determination of the texture of a directionally solidified sample of high-purity copper

A flexible and standalone forward simulation model for laboratory X-ray diffraction contrast tomography

scientific article published on 18 September 2020

A method to characterize the roughness of 2-D line features: recrystallization boundaries.

scientific article published on 29 November 2016

A phase-field simulation study of irregular grain boundary migration during recrystallization

A three-dimensional X-ray diffraction microscope for deformation studies of polycrystals

article

Analysis of Deformation Structures in FCC Materials Using EBSD and TEM Techniques

article

Analysis of Orientation Relations Between Deformed Grains and Recrystallization Nuclei

Analysis of bearing steel exposed to rolling contact fatigue

article

Annealing Textures in Aluminium Deformed by Hot Plane Strain Compression

Apparatus for Dynamical Texture Measurements by Neutron Diffraction Using a Position Sensitive- Detector

article

Application of high-energy synchrotron radiation for texture studies

Applications of orientation mapping by scanning and transmission electron microscopy

article

Automatic Recognition of Deformed and Recrystallized Regions in Partly Recrystallized Samples Using Electron Back Scattering Patterns

Automatic determination of recrystallization parameters based on EBSD mapping

Automatic determination of recrystallization parameters in metals by electron backscatter pattern line scans

Boundary Fractal Analysis of Two Cube-oriented Grains in Partly Recrystallized Copper

Boundary Migration during Recrystallization of Heavily Deformed Pure Nickel

scholarly article published April 2012

Boundary migration during recrystallization: experimental observations

Boundary migration in a 3D deformed microstructure inside an opaque sample

scientific article

Characterization of boundary roughness of two cube grains in partly recrystallized copper

Comparison of texture measurements on two phase α/β-brass obtained by X-ray and neutron diffraction

Crystallographic Analysis of Nucleation at Hardness Indentations in High-Purity Aluminum

scholarly article by Chaoling Xu et al published 9 August 2016 in Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science

Dark field X-ray microscopy for studies of recrystallization

Deep learning for improving non-destructive grain mapping in 3D

scientific article published on 14 July 2021

Deformation and recrystallization textures in commercially pure aluminum

scholarly article by Niels Hansen & Dorte Juul Jensen published February 1986 in Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science

Deformation induced dislocation boundaries: Alignment and effect on mechanical properties

Deformed metals – structure, recrystallisation and strength

Dense dislocation walls and microbands aligned with slip planes—theoretical considerations

Direct Observation of Grain Boundary Migration during Recrystallization within the Bulk of a Moderately Deformed Aluminium Single Crystal

Direct observation of nucleation in the bulk of an opaque sample

scientific article published on 14 February 2017

EBSP Studies of Growth Rates during Recrystallization

Effect of Annealing Temperature on Recrystallisation in Al (AA1200) Cold Rolled to a True Strain of 4

article

Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium

article

Effect of grain orientation on microstructures during hot deformation of AA 3104 aluminium alloy by plane strain compression

Effect of texture on the development of grain size distribution during normal grain growth

article

Effects of Initial Parameters on the Development of Cube Texture during Recrystallization of Copper

article

Effects of Nuclei Clustering on Recrystallization Kinetics

Effects of Widening during Rolling on the Subsequent Recrystallization Kinetics of Copper

Effects of distributions of growth rates on recrystallization kinetics and microstructure

Effects of heterogeneity on recrystallization kinetics of nanocrystalline copper prepared by dynamic plastic deformation

Effects of structural heterogeneity of nanostructured copper on the evolution of the sizes of recrystallized grains during annealing

Evolution of microstructure and texture during recovery and recrystallization in heavily rolled aluminum

scholarly article by O V Mishin et al published 24 April 2015 in IOP Conference Series: Materials Science and Engineering

Fabricating interstitial-free steel with simultaneous high strength and good ductility with homogeneous layer and lamella structure

article published in 2017

Flow stress anisotropy caused by geometrically necessary boundaries

Flow stress anisotropy in aluminium

article

Growth kinetics of individual grains during recrystallization with an intermediate cooling cycle

Growth of nuclei with different crystallographic orientations during recrystallization

article

Growth rates and misorientation relationships between growing nuclei/grains and the surrounding deformed matrix during recrystallization

article

Growth rates for different texture components during recrystallization of IF steel

article published in 2001

Importance of Local Structural Variations on Recrystallization

In Situ Investigation of Bulk Nucleation by X-Ray Diffraction

In-Situ Investigation of Local Boundary Migration During Recrystallization

In-Situ Measurements of Growth of Nuclei within the Bulk of Deformed Aluminium Single Crystals

In-situ investigation of the evolution of annealing twins in high purity aluminium

In-situ measurement of phase transformation kinetics using neutron diffraction

In-situ observations of nucleation in Al-0.1Mg

In-situmeasurement of annealing kinetics of individual bulk grains in nanostructured aluminium

article

Kinetic texture measurements

Kinetics of Thermal Grooving during Low Temperature Recrystallization of Pure Aluminum

scholarly article published March 2013

Kinetics of individual grains during recrystallization

Kinetics of individual grains during recrystallization of cold-rolled copper

Large strain deformation structures in aluminium crystals with rolling texture orientations

article

Local boundary migration during recrystallization in pure aluminium

scholarly article by Yubin Zhang et al published February 2011 in Scripta Materialia

Local strain distributions in partially recrystallized copper determined by in situ tensile investigation

Mapping Partially Recrystallised Structures by 3DXRD

Microstructural Analysis of Orientation-Dependent Recovery and Recrystallization in a Modified 9Cr-1Mo Steel Deformed by Compression at a High Strain Rate

Microstructural path and temperature dependence of recrystallization in commercial aluminum

scholarly article by R.A Vandermeer & D Juul Jensen published June 2001 in Acta Materialia

Microstructural path model and strain dependence of recrystallisation in commercial aluminium

Microstructure and local crystallography of cold rolled aluminium

scholarly article by G.I. Rosen et al published July 1995 in Acta Materialia

Microstructures and boundary populations in materials produced by equal channel angular extrusion

Misorientation Aspects of Growth during Recrystallization

article

Modeling Microstructural Evolution of Multiple Texture Components during Recrystallization

Modeling microstructural evolution of multiple texture components during recrystallization

Modelling flow stress anisotropy caused by deformation induced dislocation boundaries

Modelling of microstructure development during recrystallization

article

Molecular dynamics simulations of grain boundary migration during recrystallization employing tilt and twist dislocation boundaries to provide the driving pressure

article

New 3DXRD Results on Recrystallization and Grain Growth

Nondestructive approaches for 3-D materials characterization

article

Nucleation at hardness indentations in cold rolled Al

Nucleation of recrystallization observed in situ in the bulk of a deformed metal

On the estimation of cahn-hagel interface migration rates

On the statistical analysis of orientation data

article

Orientation correlations in aluminium deformed by ECAE

Orientation relationships between recrystallization nuclei at triple junctions and deformed structures

article

Orientations of Recrystallization Nuclei Studied by 3DXRD

Orientations of recrystallization nuclei developed in columnar-grained Ni at triple junctions

Perspectives on Materials Science in 3D

scholarly article published 2012

Phase-field simulation study of the migration of recrystallization boundaries

scholarly article in Physical Review B, vol. 88 no. 5, August 2013

Quantification of deformation microstructure at ultra-low tensile strain in pure Al prepared by spark plasma sintering

Quantifying recrystallization nucleation and growth kinetics of cold-worked copper by microstructural analysis

Quantitative analysis of grain subdivision in cold rolled aluminium

article

Recovery and recrystallization in Cold-Rolled Al-SiCw composites

Recrystallisation kinetics of aluminium AA1200 cold rolled to true strain of 2

article

Recrystallisation kinetics: from statics to dynamics and from 2D to 3D

article

Recrystallisation of channel die deformed single crystals of typical rolling orientations

article published in 2001

Recrystallization Kinetics in the Bulk and at the Surface

Recrystallization in hot vs cold deformed commercial aluminum: a microstructure path comparison

scholarly article by R.A. Vandermeer & D. Juul Jensen published June 2003 in Acta Materialia

Recrystallization kinetics in copper: Comparison between techniques

Recrystallization kinetics of individual bulk grains in 90% cold-rolled aluminium

article

Recrystallization microstructure in cold-rolled aluminum composites reinforced by silicon carbide whiskers

scholarly article by Y. L. Liu et al published September 1989 in Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science

Recrystallization of AA1050 Studied by 3DXRD

Reply to comment on “Microstructural path and temperature dependence of recrystallization in commercial aluminum”

scholarly article by R Vandermeer published June 2003 in Scripta Materialia

Simulation of Recrystallization Using Molecular Dynamics; Effects of the Interatomic Potential

Simulations of boundary migration during recrystallization using molecular dynamics

article

Slip pattern, microstructure and local crystallography in an aluminium single crystal of brass orientation {110}〈112〉

scholarly article by A Godfrey et al published January 1998 in Acta Materialia

Slip pattern, microstructure and local crystallography in an aluminium single crystal of copper orientation {112}〈111〉

scholarly article by A. Godfrey et al published January 1998 in Acta Materialia

Supercube grains leading to a strong cube texture and a broad grain size distribution after recrystallization

Synchrotron X-ray measurement of residual strain within the nose of a worn manganese steel railway crossing

TEXTURE TRANSFORMATION DURING ANNEALING. IN-SITU MEASUREMENTS AND COMPUTER MODELLING

Textural and Microstructural Evolution during Cold-Rolling of Pure Nickel

scholarly article published May 1994

Texture development during recrystallization of aluminium containing large particles

article

The Influence of Strain on Annealing Behaviour of Heavily Rolled Aluminium AA1050

The Orientations of Nuclei at Triple Junctions in Deformed Columnar Grain Ni

The effect of bending and straightening on rolling texture and microstructure in brass

The role of grain size and strain in work hardening and texture development

article

Three Dimensional Characterization of Grain Structures by EBSP and 3DXRD

Three-dimensional geometric simulations of random anisotropic growth during transformation phenomena

Three-dimensional investigation of recrystallization nucleation in a particle-containing Al alloy

Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders

Time Evolution in 3D Metal Microstructures — Recrystallization

Towards an integrated materials characterization toolbox

Towards atomic level simulations of recrystallisation – setting up suitable geometry

X-ray microscopy in four dimensions