List of works - Deborah Chung

A comparative study of the wettability of steel, carbon, and polyethylene fibers by water

scholarly article

A review of exfoliated graphite

article

A review of multifunctional polymer-matrix structural composites

article

Bentonite-derived materials preferably with nanocarbon incorporation exhibiting exceptionally high dielectric loss at relatively low electrical conductivity

Capacitance-based defect detection and defect location determination for cement-based material

Capacitance-based nondestructive detection of aggregate proportion variation in a cement-based slab

Capacitance-based self-sensing of flaws and stress in carbon-carbon composite, with reports of the electric permittivity, piezoelectricity and piezoresistivity

scholarly article in Carbon, vol. 146, May 2019

Capacitance-based stress self-sensing in cement paste without requiring any admixture

Carbon Materials

Carbon black and fumed alumina exhibiting high interface-derived mechanical energy dissipation

scholarly article in Carbon, vol. 103, July 2016

Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing

scholarly article in Carbon, vol. 50 no. 9, August 2012

Carbon nanofiber mats for electromagnetic interference shielding

scholarly article in Carbon, vol. 111, January 2017

Carbon-black thixotropic thermal pastes for improving thermal contacts ⬇️

scholarly article

Carbon-coated sepiolite clay fibers with acid pre-treatment as low-cost organic adsorbents

scholarly article in Carbon, vol. 123, October 2017

Cathodic protection of steel reinforced concrete facilitated by using carbon fiber reinforced mortar or concrete ⬇️

scholarly article

Colossal electric permittivity discovered in polyacrylonitrile (PAN) based carbon fiber, with comparison of PAN-based and pitch-based carbon fibers

scholarly article in Carbon, vol. 145, April 2019

Continuous carbon fiber polymer–matrix composites in unprecedented antiferroelectric coupling providing exceptionally high through-thickness electric permittivity

Decreasing the electric permittivity of cement by graphite particle incorporation

scholarly article in Carbon, vol. 122, October 2017

Decreasing the shear stress-induced in-plane molecular alignment by unprecedented stereolithographic delay in three-dimensional printing

Degree of dispersion of latex particles in cement paste, as assessed by electrical resistivity measurement ⬇️

scholarly article

Development, design and applications of structural capacitors

article

Effect of carbon fiber grade on the electrical behavior of carbon fiber reinforced cement

scholarly article

Effect of curing age on the self-monitoring behavior of carbon fiber reinforced mortar ⬇️

scholarly article

Effect of fiber lay-up configuration on the electromagnetic interference shielding effectiveness of continuous carbon fiber polymer-matrix composite

scholarly article in Carbon, vol. 141, January 2019

Effect of methylcellulose admixture on the mechanical properties of cement ⬇️

scholarly article

Effect of nickel coating on the stress-dependent electric permittivity, piezoelectricity and piezoresistivity of carbon fiber, with relevance to stress self-sensing

scholarly article by Xiang Xi & Deborah Chung published April 2019 in Carbon

Effect of stress on the capacitance and electric permittivity of three-dimensionally printed polymer, with relevance to capacitance-based stress monitoring

article published in 2017

Effect of the fringing electric field on the apparent electric permittivity of cement-based materials

article

Effects of printing conditions on the molecular alignment of three-dimensionally printed polymer

article published in 2018

Electret behavior of unpoled carbon fiber with and without nickel coating ⬇️

scholarly article

Electret, piezoelectret and piezoresistivity discovered in steels, with application to structural self-sensing and structural self-powering

scholarly article

Electret, piezoelectret, dielectricity and piezoresistivity discovered in exfoliated-graphite-based flexible graphite, with applications in mechanical sensing and electric powering

scholarly article in Carbon, vol. 150, September 2019

Electric permittivity of carbon fiber

scholarly article in Carbon, vol. 143, March 2019

Electric permittivity of reduced graphite oxide

scholarly article in Carbon, vol. 111, January 2017

Electrical resistivity of submicron-diameter carbon-filament compacts

scholarly article

Electromechanical, self-sensing and viscoelastic behavior of carbon fiber tows

article

Enhancing the inherent piezoelectric behavior of a three-dimensionally printed acrylate polymer by electrical poling

scholarly article by Patatri Chakraborty et al published 25 October 2018 in Smart Materials and Structures

Exfoliation of graphite

Fiber Breakage In Polymer-Matrix Composites During Static And Fatigue Loading, Observed By Electrical Resistance Measurement

scholarly article

First observation of the effect of the layer printing sequence on the molecular structure of three-dimensionally printed polymer, as shown by in-plane capacitance measurement

First report of capacitance-based self-sensing and in-plane electric permittivity of carbon fiber polymer-matrix composite

scholarly article in Carbon, vol. 140, December 2018

First report of fumed alumina incorporation in carbon–carbon composite and the consequent improvement of the oxidation resistance and mechanical properties

scholarly article in Carbon, vol. 101, May 2016

Graphite oxide paper as a polarizable electrical conductor in the through-thickness direction

article

High electric permittivity of polymer-modified cement due to the capacitance of the interface between polymer and cement

High-strength high-surface-area porous carbon made from submicron-diameter carbon filaments

scholarly article

Improving the dispersion of steel fibers in cement mortar by the addition of silane ⬇️

scholarly article

Improving the electrical and mechanical behavior of electrically conductive paint by partial replacement of silver by carbon black ⬇️

scholarly article

Improving the tensile properties of carbon fiber reinforced cement by ozone treatment of the fiber

scholarly article

Interface-derived solid-state viscoelasticity exhibited by nanostructured and microstructured materials containing carbons or ceramics

scholarly article in Carbon, vol. 144, April 2019

Laboratory simulation of capacitance-based layer-by-layer monitoring of three-dimensional printing

Linear correlation of bond strength and contact electrical resistivity between steel rebar and concrete

scholarly article

Mechanical energy dissipation modeling of exfoliated graphite based on interfacial friction theory

scholarly article in Carbon, vol. 108, November 2016

Mildred S. Dresselhaus (1930 – 2017) – A Tribute from the Carbon Journal

article by Robert H. Hurt et al published August 2017 in Carbon

Mildred S. Dresselhaus (1930–2017)

scientific article published in Nature

Ozone treatment of carbon fiber for reinforcing cement

scholarly article

Piezoelectret-based and piezoresistivity-based stress self-sensing in steel beams under flexure ⬇️

scholarly article

Piezoelectric and piezoresistive behavior of unmodified carbon fiber

scholarly article in Carbon, vol. 145, April 2019

Piezoelectric behavior of three-dimensionally printed acrylate polymer without filler or poling

Piezoelectricity, piezoresistivity and dielectricity discovered in solder

Piezoelectricity-based self-sensing of compressive and flexural stress in cement-based materials without admixture requirement and without poling

scholarly article by Kairong Shi & Deborah Chung published 5 September 2018 in Smart Materials and Structures

Piezoresistive behavior of carbon fiber in epoxy

scholarly article

Piezoresistivity and piezoelectricity discovered in aluminum, with relevance to structural self-sensing

Processing-structure-property relationships of continuous carbon fiber polymer-matrix composites

Radio-wave electrical conductivity and absorption-dominant interaction with radio wave of exfoliated-graphite-based flexible graphite, with relevance to electromagnetic shielding and antennas ⬇️

scholarly article

Review: Materials for vibration damping

article

Sensing the stress in steel by capacitance measurement

Significant effect of sorbed water on the electrical and dielectric behavior of graphite oxide

scholarly article in Carbon, vol. 119, August 2017

Solvent cleansing of the surface of carbon filaments and its benefit to the electrochemical behavior ⬇️

scholarly article

Sound absorption enhancement using solid–solid interfaces in a non-porous cement-based structural material

Strong viscous behavior discovered in nanotube mats, as observed in boron nitride nanotube mats

The Road to Scientific Success

article published in 2006

The importance of the electrical contact between specimen and testing fixture in evaluating the electromagnetic interference shielding effectiveness of carbon materials

scholarly article in Carbon, vol. 117, June 2017

Thermoelectric polymer-matrix structural and nonstructural composite materials

article published in 2018

Through-thickness thermal conduction in glass fiber polymer–matrix composites and its enhancement by composite modification

Turbulent flow over a long flat plate with uniform roughness

Understanding the increase of the electric permittivity of cement caused by latex addition

article

Unprecedented Capacitance-Based Nondestructive Evaluation of Steels

scholarly article

Unprecedented sensing of interlayer defects in three-dimensionally printed polymer by capacitance measurement

scholarly article by Patatri Chakraborty et al published 15 October 2018 in Smart Materials and Structures

Use of submicron diameter carbon filaments for reinforcement between continuous carbon fiber layers in a polymer-matrix composite

scholarly article

Vibration Reduction Ability of Polymers, Particularly Polymethylmethacrylate and Polytetrafluoroethylene

scholarly article

Z-Axis anisotropic electrical conductor films in adhesive and standalone forms for electrical interconnection ⬇️

scholarly article

List of works by Deborah Chung

A comparative study of the wettability of steel, carbon, and polyethylene fibers by water

A review of exfoliated graphite

A review of multifunctional polymer-matrix structural composites

Bentonite-derived materials preferably with nanocarbon incorporation exhibiting exceptionally high dielectric loss at relatively low electrical conductivity

Capacitance-based defect detection and defect location determination for cement-based material

Capacitance-based nondestructive detection of aggregate proportion variation in a cement-based slab

Capacitance-based self-sensing of flaws and stress in carbon-carbon composite, with reports of the electric permittivity, piezoelectricity and piezoresistivity

Capacitance-based stress self-sensing in cement paste without requiring any admixture

Carbon Materials

Carbon black and fumed alumina exhibiting high interface-derived mechanical energy dissipation

Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing

Carbon nanofiber mats for electromagnetic interference shielding

Carbon-black thixotropic thermal pastes for improving thermal contacts ⬇️

Carbon-coated sepiolite clay fibers with acid pre-treatment as low-cost organic adsorbents

Cathodic protection of steel reinforced concrete facilitated by using carbon fiber reinforced mortar or concrete ⬇️

Colossal electric permittivity discovered in polyacrylonitrile (PAN) based carbon fiber, with comparison of PAN-based and pitch-based carbon fibers

Continuous carbon fiber polymer–matrix composites in unprecedented antiferroelectric coupling providing exceptionally high through-thickness electric permittivity

Decreasing the electric permittivity of cement by graphite particle incorporation

Decreasing the shear stress-induced in-plane molecular alignment by unprecedented stereolithographic delay in three-dimensional printing

Degree of dispersion of latex particles in cement paste, as assessed by electrical resistivity measurement ⬇️

Development, design and applications of structural capacitors

Effect of carbon fiber grade on the electrical behavior of carbon fiber reinforced cement

Effect of curing age on the self-monitoring behavior of carbon fiber reinforced mortar ⬇️

Effect of fiber lay-up configuration on the electromagnetic interference shielding effectiveness of continuous carbon fiber polymer-matrix composite

Effect of methylcellulose admixture on the mechanical properties of cement ⬇️

Effect of nickel coating on the stress-dependent electric permittivity, piezoelectricity and piezoresistivity of carbon fiber, with relevance to stress self-sensing

Effect of stress on the capacitance and electric permittivity of three-dimensionally printed polymer, with relevance to capacitance-based stress monitoring

Effect of the fringing electric field on the apparent electric permittivity of cement-based materials

Effects of printing conditions on the molecular alignment of three-dimensionally printed polymer

Electret behavior of unpoled carbon fiber with and without nickel coating ⬇️

Electret, piezoelectret and piezoresistivity discovered in steels, with application to structural self-sensing and structural self-powering

Electret, piezoelectret, dielectricity and piezoresistivity discovered in exfoliated-graphite-based flexible graphite, with applications in mechanical sensing and electric powering

Electric permittivity of carbon fiber

Electric permittivity of reduced graphite oxide

Electrical resistivity of submicron-diameter carbon-filament compacts

Electromechanical, self-sensing and viscoelastic behavior of carbon fiber tows

Enhancing the inherent piezoelectric behavior of a three-dimensionally printed acrylate polymer by electrical poling

Exfoliation of graphite

Fiber Breakage In Polymer-Matrix Composites During Static And Fatigue Loading, Observed By Electrical Resistance Measurement

First observation of the effect of the layer printing sequence on the molecular structure of three-dimensionally printed polymer, as shown by in-plane capacitance measurement

First report of capacitance-based self-sensing and in-plane electric permittivity of carbon fiber polymer-matrix composite

First report of fumed alumina incorporation in carbon–carbon composite and the consequent improvement of the oxidation resistance and mechanical properties

Graphite oxide paper as a polarizable electrical conductor in the through-thickness direction

High electric permittivity of polymer-modified cement due to the capacitance of the interface between polymer and cement

High-strength high-surface-area porous carbon made from submicron-diameter carbon filaments

Improving the dispersion of steel fibers in cement mortar by the addition of silane ⬇️

Improving the electrical and mechanical behavior of electrically conductive paint by partial replacement of silver by carbon black ⬇️

Improving the tensile properties of carbon fiber reinforced cement by ozone treatment of the fiber

Interface-derived solid-state viscoelasticity exhibited by nanostructured and microstructured materials containing carbons or ceramics

Laboratory simulation of capacitance-based layer-by-layer monitoring of three-dimensional printing

Linear correlation of bond strength and contact electrical resistivity between steel rebar and concrete

Mechanical energy dissipation modeling of exfoliated graphite based on interfacial friction theory

Mildred S. Dresselhaus (1930 – 2017) – A Tribute from the Carbon Journal

Mildred S. Dresselhaus (1930–2017)

Ozone treatment of carbon fiber for reinforcing cement

Piezoelectret-based and piezoresistivity-based stress self-sensing in steel beams under flexure ⬇️

Piezoelectric and piezoresistive behavior of unmodified carbon fiber

Piezoelectric behavior of three-dimensionally printed acrylate polymer without filler or poling

Piezoelectricity, piezoresistivity and dielectricity discovered in solder

Piezoelectricity-based self-sensing of compressive and flexural stress in cement-based materials without admixture requirement and without poling

Piezoresistive behavior of carbon fiber in epoxy

Piezoresistivity and piezoelectricity discovered in aluminum, with relevance to structural self-sensing

Processing-structure-property relationships of continuous carbon fiber polymer-matrix composites

Radio-wave electrical conductivity and absorption-dominant interaction with radio wave of exfoliated-graphite-based flexible graphite, with relevance to electromagnetic shielding and antennas ⬇️

Review: Materials for vibration damping

Sensing the stress in steel by capacitance measurement

Significant effect of sorbed water on the electrical and dielectric behavior of graphite oxide

Solvent cleansing of the surface of carbon filaments and its benefit to the electrochemical behavior ⬇️

Sound absorption enhancement using solid–solid interfaces in a non-porous cement-based structural material

Strong viscous behavior discovered in nanotube mats, as observed in boron nitride nanotube mats

The Road to Scientific Success

The importance of the electrical contact between specimen and testing fixture in evaluating the electromagnetic interference shielding effectiveness of carbon materials

Thermoelectric polymer-matrix structural and nonstructural composite materials

Through-thickness thermal conduction in glass fiber polymer–matrix composites and its enhancement by composite modification

Turbulent flow over a long flat plate with uniform roughness

Understanding the increase of the electric permittivity of cement caused by latex addition

Unprecedented Capacitance-Based Nondestructive Evaluation of Steels

Unprecedented sensing of interlayer defects in three-dimensionally printed polymer by capacitance measurement

Use of submicron diameter carbon filaments for reinforcement between continuous carbon fiber layers in a polymer-matrix composite