Search filters

List of works by Frédéric Barlat

A Novel Multi-objective Genetic Algorithms-Based Calculation of Hill’s Coefficients

scholarly article by Krishnaswamy Hariharan et al published 2 April 2014 in Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science

A Shear Fracture Criterion to Predict Limit Strains in Sheet Metal Forming

A Theoretical Study of the Effect of the Double Strain Path Change on the Forming Limits of Metal Sheet

A comparative study between micro- and macro-mechanical constitutive models developed for complex loading scenarios

A dislocation-based hardening model incorporated into an anisotropic hardening approach

article

A pragmatic approach to accommodate in-plane anisotropy in forming limit diagrams

A six-component yield function for anisotropic materials

article

A study of the Yld2004 yield function and one extension in polynomial form: A new implementation algorithm, modeling range, and earing predictions for aluminum alloy sheets

scholarly article by Stefan C. Soare & Frédéric Barlat published November 2011 in European Journal of Mechanics A - Solids

About the influence of hydrostatic pressure on the yielding and flow of metallic polycrystals

Advanced Steel Design by Multi-Scale Modeling

Advanced constitutive modeling and application to industrial forming processes

Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending

Advances in Constitutive Modeling of Plasticity for Forming Applications

article by Frédéric Barlat et al published December 2016 in Key Engineering Materials

Advances in anisotropy and formability

An alternative to kinematic hardening in classical plasticity

article by Frédéric Barlat et al published September 2011 in International Journal of Plasticity

An application of homogeneous anisotropic hardening to springback prediction in pre-strained U-draw/bending

article published in 2012

An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals

An extended Modified Maximum Force Criterion for the prediction of localized necking under non-proportional loading

Analysis of sheet metal formability through isotropic and kinematic hardening models

article

Anisotropic Yield Functions

Anisotropy and Formability

Application of Homogeneous Potentials for the Modeling of the Bauschinger Effects in Ultra Low Carbon Steel

Application of central composite design for optimization of two-stage forming process using ultra-thin ferritic stainless steel

Application of crystal plasticity to an austenitic stainless steel

article by Youngung Jeong et al published 24 February 2012 in Modelling and Simulation in Materials Science and Engineering

Application of strain rate potentials with multiple linear transformations to the description of polycrystal plasticity

article by Meziane Rabahallah et al published May 2009 in International Journal of Solids and Structures

Application of the Virtual Fields Method to determine dynamic properties at intermediate strain rates

Application of the theory of representation to describe yielding of anisotropic aluminum alloys

scholarly article by Oana Cazacu & Frédéric Barlat published July 2003 in International Journal of Engineering Science

Application of the virtual fields method to the identification of the homogeneous anisotropic hardening parameters for advanced high strength steels

Characterization of dynamic hardening behavior using acceleration information

Characterization of fracture in medium Mn steel

Characterization of the Dynamic Strain Hardening Behavior from Full-field Measurements

Characterization of the post-necking strain hardening behavior using the virtual fields method

Combined effects of anisotropy and tension–compression asymmetry on the torsional response of AZ31 Mg

Constitutive Descriptions For Metal Forming Simulations

Constitutive Modeling for Sheet Metal Forming

Constitutive and friction modeling for accurate springback analysis of advanced high strength steel sheets

Constitutive modeling for path-dependent behavior and its influence on twist springback

Constitutive modeling of ferritic stainless steel

Constitutive modelling of high strength titanium alloy Ti-6Al-4 V for sheet forming applications at room temperature

scholarly article by Ossama Mamdouh Badr et al published February 2016 in International Journal of Solids and Structures

Continuous strain path change simulations for sheet metal

Continuum physics of phase and defect microstructures: bridging the gap between physical metallurgy and plasticity of aluminum alloys

scholarly article by Michael V. Glazoff et al published March 2004 in International Journal of Plasticity

Convex polynomial yield functions

Correlation between swift effects and tension–compression asymmetry in various polycrystalline materials

Crystal Plasticity Predictions of Forward-Reverse Simple Shear Flow Stress

scholarly article published December 2011

Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels

article by Ji Hoon Kim et al published March 2012 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

Crystal plasticity finite element analysis of ferritic stainless steel for sheet formability prediction

article by Ji Hoon Kim et al published June 2017 in International Journal of Plasticity

Deformation-induced anisotropy of uniaxially prestrained steel sheets

Design of high strength differential TWB to enhance drawability: FE study and optimization

Determination of Anisotropic Plastic Constitutive Parameters Using the Virtual Fields Method

Determination of Anisotropic Yield Coefficients by a Data-Driven Multiobjective Evolutionary and Genetic Algorithm

Determination of the Dynamic Strain Hardening Parameters from Acceleration Fields

Determination of the Forming Limit Diagram of an Ultra-Thin Ferritic Stainless Steel Sheet

Development of a one point quadrature shell element for nonlinear applications with contact and anisotropy

article

Effect of Rolling Parameters on Surface Strain Variation in Hot Strip Rolling

Effect of asymmetrical rolling and annealing the mechanical response of an 1050-o sheet

article

Effect of nonlinear multi-axial elasticity and anisotropic plasticity on quasi-static dent properties of automotive steel sheets

article by Jeong-Yeon Lee et al published June 2016 in International Journal of Solids and Structures

Effect of slide motion on springback in 2-D draw bending for AHSS

article published in 2015

Effect of the determination method of the material parameters on the accuracy of forming limit analyses for 5000 series aluminum alloy

scholarly article published 2016

Evaluation of Anisotropic Yield Functions Characterized by Uniaxial and Biaxial Experiments for Formability of DP590 Sheet Steel

Evaluation of Constitutive Models for Springback Prediction in U-draw∕bending of DP and TRIP Steel Sheets

Evaluation of Fracture Micromechanisms in a Fine-Grained Dual Phase Steel during Uniaxial Tensile Deformation

Evaluation of biaxial flow stress based on elasto-viscoplastic self-consistent analysis of X-ray diffraction measurements

Experiment and modeling to investigate the effect of stress state, strain and temperature on martensitic phase transformation in TRIP-assisted steel

Experimental Verification of the Tension-Compression Asymmetry of the Flow Stresses of a High Strength Steel Sheet

Experimental and Numerical Analyses of Hot Stamped Parts with Tailored Properties

Experimental and theoretical formability analysis using strain and stress based forming limit diagram for advanced high strength steels

Experimental assessment of nonlinear elastic behaviour of dual-phase steels and application to springback prediction

Extension of homogeneous anisotropic hardening model to cross-loading with latent effects

article

Extension of quasi-plastic–elastic approach to incorporate complex plastic flow behavior – application to springback of advanced high-strength steels

Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction

article

Formability of AHSS under an Attach-Detach Forming Mode

Formability of austenitic and ferritic stainless steels at warm forming temperature

article

Formability prediction of advanced high strength steels using constitutive models characterized by uniaxial and biaxial experiments

Forming Limit Curves and Forming Limit Stress Curves for Advanced High Strength Steels

Forming limit and fracture mechanism of ferritic stainless steel sheets

Hole expansion of twinning-induced plasticity steel

article by Le Xu et al published June 2012 in Scripta Materialia

Identification of nonlinear kinematic hardening constitutive model parameters using the virtual fields method for advanced high strength steels

scientific article published in December 2016

Identification of the YLD2000-2D Model with the Virtual Fields Method

article

In Memoriam

Influence of Contact Friction on the Experimental Determination of the Balanced Biaxial Strain-Ratio Using the Disc Compression Test

Influence of Tempering Temperature on Low Cycle Fatigue of High Strength Steel

article

Investigation of plastic strain rate under strain path changes in dual-phase steel using microstructure-based modeling

Isotropic to distortional hardening transition in metal plasticity

article by Niko Manopulo et al published March 2015 in International Journal of Solids and Structures

Material modeling of 6016-O and 6016-T4 aluminum alloy sheets and application to hole expansion forming simulation

scholarly article by Toshihiko Kuwabara et al published June 2017 in International Journal of Plasticity

Measurement and Analysis of the Elastic-Plastic Deformation Behavior of an Ultra-thin Austenitic Stainless Steel Sheet Subjected to In-plane Reverse Loading

Mechanical behavior of an asymmetrically rolled and annealed 1050-O sheet

Mechanical property of magnesium alloy sheet with hardening deterioration at warm temperatures and its application for failure analysis: Part I - property characterization

article

Mechanical, microstructural behaviour and modelling of dual phase steels under complex deformation paths

Meso-Scopic Analysis of Strain Path Change Effect on the Hardening Behavior of Dual-Phase Steel

Microstructural and Crystallographic Aspects of Yield Surface Evolution

Modeling of forming limit for multilayer sheets based on strain-rate potentials

Modeling of localization and fracture phenomena in strain and stress space for sheet metal forming

Modeling of the Mechanical Response During Reversal Shear Loading: Application to Steels

Modeling of the mechanical behavior and texture evolution in Zn alloys during reverse shear loading

Modelling and sensitivity analysis of twist springback in deep drawing of dual-phase steel

Multi-Objective Genetic Algorithm to Optimize Variable Drawbead Geometry for Tailor Welded Blanks Made of Dissimilar Steels

New convex yield functions for orthotropic metal plasticity

article by Holger Aretz & Frédéric Barlat published May 2013 in International Journal of Non-Linear Mechanics

New interpretation of cyclic Swift effects

New interpretation of monotonic Swift effects: Role of tension–compression asymmetry

Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate

Nonlinear elastic behaviors of low and high strength steels in unloading and reloading

Numerical Simulation of the Mechanical Response During Strain Path Change: Application to Zn Alloys

Numerical investigation of the post-necking behavior of aluminum sheets in the presence of geometrical and material inhomogeneities

scholarly article by Maysam B. Gorji et al published December 2016 in International Journal of Solids and Structures

Numerical procedures for predicting localization in sheet metals using crystal plasticity

article by Ji Hoon Kim et al published May 2013 in Computational Materials Science

Observations on the Nonlinear Unloading Behavior of Advanced High Strength Steels

On linear transformations of stress tensors for the description of plastic anisotropy

On precipitate induced hardening in crystal plasticity: algorithms and simulations

article by Chung-Souk Han et al published August 2004 in International Journal of Plasticity

On precipitate induced hardening in crystal plasticity: theory

article by Chung-Souk Han et al published March 2004 in International Journal of Plasticity

Orthotropic yield criterion for hexagonal closed packed metals

Parameter Determination of Anisotropic Yield Criterion

Parameter identification of the homogeneous anisotropic hardening model using the virtual fields method

article

Parameter reduction for the Yld2004-18p yield criterion

Piecewise linear approximation of nonlinear unloading-reloading behaviors using a multi-surface approach

Plane stress yield function for aluminum alloy sheets—part II: FE formulation and its implementation

article

Plastic Instability in Complex Strain Paths Predicted by Advanced Constitutive Equations

Plastic anisotropy in precipitation-strengthened aluminium alloys deformed in uniaxial and plane strain deformation

Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions

Prediction of Ridging by 3-Dimensional Texture in Ferritic Stainless Steels

Preface

Preface - Materialwissenschaft und Werkstofftechnik 10/2005

Probing Formability Improvement of Ultra-thin Ferritic Stainless Steel Bipolar Plate of PEMFC in Non-conventional Forming Process

Sheet Forming Simulations of Automotive Parts using Different Yield Functions

Springback Reduction in Tailor Welded Blank with High Strength Differential by Using Multi-Objective Evolutionary and Genetic Algorithms

Strain hardening response and modeling of EDDQ and DP780 steel sheet under non-linear strain path

article

Strain-rate sensitivity limit diagrams and plastic instabilities in a 6xxx series aluminum alloy Part I: Analysis of temporal stress–strain serrations

scholarly article by Sergey N. Rashkeev et al published June 2002 in Computational Materials Science

Stress Relaxation for Formability Improvement

Stress integration schemes for novel homogeneous anisotropic hardening model

article

Texture evolution of FCC sheet metals during deep drawing process

The effect of plastic anisotropy on compressive instability in sheet metal forming

The forming limit diagram of ferritic stainless steel sheets: Experiments and modeling

Themo-mechanical and microstructural modeling of friction stir welding of 6111-T4 aluminum alloys

scholarly article by Ji Hoon Kim et al published February 2009 in Metals and Materials International

Thermo-mechanical-metallurgical modeling for hot-press forming in consideration of the prior austenite deformation effect

article published in 2014

Transformation kinetics and density models of quenching and partitioning (Q&P) steels

Transient Negative Strain Hardening during Severe Plastic Deformation of Al-30wt%Zn Alloys

Twist springback characteristics of dual-phase steel sheet after non-axisymmetric deep drawing

Two-stage forming approach for manufacturing ferritic stainless steel bipolar plates in PEM fuel cell: Experiments and numerical simulations

Unconditionally Convex Yield Functions for Sheet Metal Forming Based on Linear Stress Deviator Transformation

Validation of homogeneous anisotropic hardening approach based on crystal plasticity

scholarly article published 2016

Work-hardening model for polycrystalline metals under strain reversal at large strains

article

Paulina is supported by:

About Paulina

Help