Search filters

List of works by Todd Stewart

(i) Biomechanics of the human hip – consequences for total hip replacement

scholarly article by E. Sariali et al published December 2008 in Orthopaedics and Trauma

3D surface reconstruction and FIB microscopy of worn alumina hip prostheses

A review of symptomatic leg length inequality following total hip arthroplasty ⬇️

scientific article published on January 2013

An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads.

scientific article published in January 2002

Analysis of contact mechanics for composite cushion knee joint replacements ⬇️

scientific article published on January 1, 1998

Assessing reproducibility for radiographic measurement of leg length inequality after total hip replacement. ⬇️

scientific article published in September 2012

Bone anchors or interference screws? A biomechanical evaluation for autograft ankle stabilization

scientific article published in October 2004

Carbon-carbon composite bearing materials in hip arthroplasty: analysis of wear and biological response to wear debris.

scientific article published on January 2004

Cement mantle stress under retroversion torque at heel-strike.

scientific article published on 30 October 2009

Characterization of worn alumina hip replacement prostheses

article

Contact pressure prediction in total knee joint replacements. Part 2: Application to the design of total knee joint replacements.

scientific article published in January 1995

Contact surface motion paths associated with leg length inequality following unilateral total hip replacement.

scientific article published on 26 July 2012

Dynamic surface microstructural changes during tribological contact that determine the wear behaviour of hip prostheses: metals and ceramics.

scientific article

Effect of cup abduction angle and head lateral microseparation on contact stresses in ceramic-on-ceramic total hip arthroplasty.

scientific article published on 26 November 2011

Experimental and theoretical study of the contact mechanics of five total knee joint replacements.

scientific article published in January 1995

Friction of composite cushion bearings for total knee joint replacements under adverse lubrication conditions ⬇️

scientific article published on January 1, 1997

Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: Implications for preclinical testing. ⬇️

scientific article published on 14 June 2014

In vitro investigation of friction under edge-loading conditions for ceramic-on-ceramic total hip prosthesis

scientific article published in August 2010

Influence of acetabular cup rim design on the contact stress during edge loading in ceramic-on-ceramic hip prostheses.

scientific article published on 9 February 2010

Long-term clinical, radiological and histopathological follow-up of a well-fixed Mckee-Farrar metal-on-metal total hip arthroplasty

scientific article published in June 2005

Long-term results of a total knee prosthesis utilising an all polyethylene tibial component ⬇️

scientific article published on 09 June 2013

Long-term wear of HIPed alumina on alumina bearings for THR under microseparation conditions

scientific article published in October 2001

Long-term wear of ceramic matrix composite materials for hip prostheses under severe swing phase microseparation.

scientific article published in August 2003

Metal-on-metal bearing wear with different swing phase loads

scientific article published in August 2004

Production tooling for polymer moulding using the RapidSteel process

article

Severe wear and fracture of zirconia heads against alumina inserts in hip simulator studies with microseparation

scientific article published in September 2003

Spectral analysis of the sound produced during femoral broaching and implant insertion in uncemented total hip arthroplasty

scientific article published in February 2013

Spectral characterization of squeaking in ceramic-on-ceramic total hip arthroplasty: comparison of in vitro and in vivo values.

scientific article published on 10 August 2011

Spinal angle and foot pressure during cardiac electrophysiological procedures. ⬇️

scientific article published on 10 January 2014

Strong and light plaster casts?

scientific article published on 13 June 2009

The effect of application time of two types of bone cement on the cement-bone interface strength. ⬇️

scientific article published on 6 September 2014

The impact of surgeon handedness in total hip replacement ⬇️

scientific article published on September 2014

The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers ⬇️

scientific article

The wear and fracture behaviour of ultra high molecular weight polyethylene subjected to gamma-irradiation in an atmosphere of acetylene.

scientific article published in December 2004

Three-dimensional modeling of in vitro hip kinematics under micro-separation regime for ceramic on ceramic total hip prosthesis: an analysis of vibration and noise.

scientific article published on 4 November 2009

Undetected Fracture of an Alumina Ceramic on Ceramic Hip Prosthesis

Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking ⬇️

scientific article published on 28 February 2015

Wear and deformation of ceramic-on-polyethylene total hip replacements with joint laxity and swing phase microseparation.

scientific article published in January 2003

Wear and degradation on retrieved zirconia femoral heads ⬇️

scientific article

What Are the Biomechanical Effects of Half-pin and Fine-wire Configurations on Fracture Site Movement in Circular Frames? ⬇️

scientific article published on 7 December 2015

What Are the Biomechanical Properties of the Taylor Spatial Frame™? ⬇️

scientific article published on 28 November 2016

Paulina is supported by:

About Paulina

Help