Search filters

List of works by Abdul Rahman Mohamed

A review on the formation of titania nanotube photocatalysts by hydrothermal treatment.

scientific article published on 29 March 2011

Analysis of SO2 sorption capacity of rice husk ash (RHA)/CaO/NaOH sorbents using response surface methodology (RSM): untreated and pretreated RHA.

scientific article

Ash of palm empty fruit bunch as a natural catalyst for promoting the CO₂ gasification reactivity of biomass char

scientific article published on 30 October 2012

Biohydrogen production in a continuous stirred tank bioreactor from synthesis gas by anaerobic photosynthetic bacterium: Rhodopirillum rubrum.

scientific article published on 19 June 2007

CO2 gasification reactivity of biomass char: catalytic influence of alkali, alkaline earth and transition metal salts

scientific article published on 22 June 2013

Co-gasification of tire and biomass for enhancement of tire-char reactivity in CO2 gasification process.

scientific article published on 4 April 2013

Current status of ceramic-based membranes for oxygen separation from air

scientific article published on August 10, 2010

Direct growth of carbon nanotubes on Ni/TiO2 as next generation catalysts for photoreduction of CO2 to methane by water under visible light irradiation

scholarly article by Wee-Jun Ong et al published 2013 in RSC Advances

Effective synthesis of carbon nanotubes via catalytic decomposition of methane: Influence of calcination temperature on metal–support interaction of Co–Mo/MgO catalyst

Evaluation of various additives on the preparation of rice husk ash (RHA)/CaO-based sorbent for flue gas desulfurization (FGD) at low temperature.

scientific article published on 29 March 2008

Key factor in rice husk Ash/CaO sorbent for high flue gas desulfurization activity.

scientific article published in October 2006

Parameter effect on photocatalytic degradation of phenol using TiO2-P25/activated carbon (AC)

scholarly article by Sze-Mun Lam et al published 1 June 2010 in Korean Journal of Chemical Engineering

Parametric Study of Methane Catalytic CVD into Single-walled Carbon Nanotubes Using Spin-coated Iron Nanoparticles

Performance of photocatalytic reactors using immobilized TiO2 film for the degradation of phenol and methylene blue dye present in water stream.

scientific article published in November 2004

Photocatalytic degradation of resorcinol, an endocrine disrupter, by TiO2 and ZnO suspensions

scientific article

Potential of hydrogen from oil palm biomass as a source of renewable energy worldwide

Production of biofuel from waste cooking palm oil using nanocrystalline zeolite as catalyst: process optimization studies

article

Rice Husk Ash/Calcium Oxide/Ceria Sorbent for Simultaneous Removal of Sulfur Dioxide and Nitric Oxide from Flue Gas at Low Temperature

Rice husk ash sorbent doped with copper for simultaneous removal of SO2 and NO: Optimization study

scientific article published on July 30, 2010

Selection of best impregnated palm shell activated carbon (PSAC) for simultaneous removal of SO2 and NOx

scientific article published on 11 November 2009

Selection of metal oxides in the preparation of rice husk ash (RHA)/CaO sorbent for simultaneous SO2 and NO removal

scientific article published on 09 December 2008

Sorption of SO(2) and NO from simulated flue gas over rice husk ash (RHA)/CaO/CeO(2) sorbent: evaluation of deactivation kinetic parameters.

scientific article published on 20 October 2010

Sub/supercritical liquefaction of oil palm fruit press fiber for the production of bio-oil: effect of solvents.

scientific article published on 26 May 2010

Subcritical water liquefaction of oil palm fruit press fiber in the presence of sodium hydroxide: an optimisation study using response surface methodology

scientific article published on 24 July 2010

Synthesis and Applications of Graphene‐Based TiO2 Photocatalysts

scientific article published on September 14, 2012

The effect of carbon precursors (methane, benzene and camphor) on the quality of carbon nanotubes synthesised by the chemical vapour decomposition

The role of molybdenum in Co-Mo/MgO for large-scale production of high quality carbon nanotubes

article