List of works - Seunghwan Lee

"Bio-glues" to enhance slipperiness of mucins: improved lubricity and wear resistance of porcine gastric mucin (PGM) layers assisted by mucoadhesion with chitosan.

scientific article published in January 2015

A Preliminary Study to Enhance the Tribological Performance of CoCrMo Alloy by Fibre Laser Remelting for Articular Joint Implant Applications

A Simple, Reproducible Approach to the Preparation of Surface-Chemical Gradients

article by Sara Morgenthaler et al published December 2003 in Langmuir

A Tribological Model for Chocolate in the Mouth: General Implications for Slurry-Lubricated Hard/Soft Sliding Counterfaces

A biomimetic alternative to poly(ethylene glycol) as an antifouling coating: resistance to nonspecific protein adsorption of poly(L-lysine)-graft-dextran

scientific article published on 11 July 2008

A catheter friction tester using balance sensor: Combined evaluation of the effects of mechanical properties of tubing materials and surface coatings

scientific article published on 24 April 2018

A novel low-friction surface for biomedical applications: modification of poly(dimethylsiloxane) (PDMS) with polyethylene glycol(PEG)-DOPA-lysine

scientific article published on September 2009

A simplified chromatographic approach to purify commercially available bovine submaxillary mucins (BSM).

scientific article

Adsorption and Lubricating Properties of Poly(l-lysine)-graft-poly(ethylene glycol) on Human-Hair Surfaces

scientific article published on 01 September 2009

Adsorption and aqueous lubricating properties of charged and neutral amphiphilic diblock copolymers at a compliant, hydrophobic interface

scientific article

Adsorption and nanowear properties of bovine submaxillary mucin films on solid surfaces: influence of solution pH and substrate hydrophobicity

scientific article

Adsorption properties of poly(l-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG) at a hydrophobic interface: influence of tribological stress, pH, salt concentration, and polymer molecular weight

scientific article published on 24 July 2008

An Aqueous-Based Surface Modification of Poly(dimethylsiloxane) with Poly(ethylene glycol) to Prevent Biofouling

scientific article published on 01 December 2005

Aqueous Lubrication of SiC and Si3N4 Ceramics Aided by a Brush-like Copolymer Additive, Poly(l-lysine)-graft-poly(ethylene glycol)

Aqueous lubricating properties of charged (ABC) and neutral (ABA) triblock copolymer chains

Aqueous lubrication of polymers: Influence of surface modification

Bacterially induced degradation of aqueous solutions of poly(l-lysine)-graft-poly(ethylene glycol) and poly(l-lysine)-graft-dextran: consequences for their lubrication properties

Chemical modification of the interfacial frictional properties of vanadium carbide through ethanol adsorption

Chocolate at a Sliding Interface

Complexation and synergistic boundary lubrication of porcine gastric mucin and branched poly(ethyleneimine) in neutral aqueous solution

scientific article published on 15 December 2016

Compressed collagen constructs with optimized mechanical properties and cell interactions for tissue engineering applications

scientific article published on 18 November 2017

Conformation of bovine submaxillary mucin layers on hydrophobic surface as studied by biomolecular probes.

scientific article published on 5 October 2014

End-grafted Sugar Chains as Aqueous Lubricant Additives: Synthesis and Macrotribological Tests of Poly(l-lysine)-graft-Dextran (PLL-g-dex) Copolymers

article by Chiara Perrino et al published 30 December 2008 in Tribology Letters

Enhancement of wear and corrosion resistance of beta titanium alloy by laser gas alloying with nitrogen

scholarly article by Chi-Wai Chan et al published March 2016 in Applied Surface Science

Enhancing the antibacterial performance of orthopaedic implant materials by fibre laser surface engineering

Feasibility of Bovine Submaxillary Mucin (BSM) Films as Biomimetic Coating for Polymeric Biomaterials

Fibre laser nitriding of titanium and its alloy in open atmosphere for orthopaedic implant applications: Investigations on surface quality, microstructure and tribological properties

scholarly article by Chi-Wai Chan et al published January 2017 in Surface & Coatings Technology

Frictional properties of titanium carbide, titanium nitride, and vanadium carbide: Measurement of a compositional dependence with atomic force microscopy

article

Gastric mucus and mucuslike hydrogels: Thin film lubricating properties at soft interfaces

scientific article published on 5 December 2017

Hydrophobins as aqueous lubricant additive for a soft sliding contact

In Vitro Urethra Model to Characterize the Frictional Properties of Urinary Catheters

article

Influence of Molecular Architecture on the Adsorption of Poly(ethylene oxide)−Poly(propylene oxide)−Poly(ethylene oxide) on PDMS Surfaces and Implications for Aqueous Lubrication

Influence of Salt on the Aqueous Lubrication Properties of End-Grafted, Ethylene Glycol-Based Self-Assembled Monolayers

scientific article published on 01 May 2009

Influence of Temperature on the Frictional Properties of Water-Lubricated Surfaces

Influence of impurities and contact scale on the lubricating properties of bovine submaxillary mucin (BSM) films on a hydrophobic surface.

scientific article

Innovative Methods and Applications in Mucoadhesion Research. ⬇️

scientific article

Interaction of porcine gastric mucin (PGM) with rigid nanoparticles (NPs) in neutral aqueous solution and its impact on the lubricating properties of PGM

Interaction of porcine gastric mucin with various polycations and its influence on the boundary lubrication properties

Interfacial Properties of Specifically Fluorinated Self-Assembled Monolayer Films

Interfacial shear rheology of β-lactoglobulin-Bovine submaxillary mucin layers adsorbed at air/water interface

scientific article published on 20 April 2017

Investigation of the Thermostability of Bovine Submaxillary Mucin (BSM) and its Impact on Lubrication

Investigation of the interaction between mucins and β-lactoglobulin under tribological stress

Lubrication Properties of a Brushlike Copolymer as a Function of the Amount of Solvent Absorbed within the Brush

Lubrication of soft and hard interfaces with thermo-responsive F127 hydrogel

Macroscopic Tribological Testing of Alkanethiol Self-assembled Monolayers (SAMs): Pin-on-disk Tribometry with Elastomeric Sliding Contacts

Modeling and simulation in tribology across scales: An overview

Molecular Structure and Equilibrium Forces of Bovine Submaxillary Mucin Adsorbed at a Solid–Liquid Interface

article published in 2015

Nanochemical surface analyzer in CMOS technology.

scientific article

Nanomechanics of electrospun phospholipid fiber

Nucleation and growth of chemical beam epitaxy gallium nitride thin films

Poly(L-lysine)-grafted-poly(ethylene glycol)-based surface-chemical gradients. Preparation, characterization, and first applications

scientific article published in December 2006

Poly(l-lysine)-graft-poly(ethylene glycol): a versatile aqueous lubricant additive for tribosystems involving thermoplastics

Porcine Gastric Mucin (PGM) at the Water/Poly(Dimethylsiloxane) (PDMS) Interface: Influence of pH and Ionic Strength on Its Conformation, Adsorption, and Aqueous Lubrication Properties

Preferential Solvation and Its Effect on the Lubrication Properties of a Surface-Bound, Brushlike Copolymer

article by Markus T. Müller et al published May 2005 in Macromolecules

Proteolytic Degradation of Bovine Submaxillary Mucin (BSM) and Its Impact on Adsorption and Lubrication at a Hydrophobic Surface.

scientific article published on 20 July 2015

Reduction in friction and wear of alumina surfaces as assisted with surface-adsorbing polymers in aqueous solutions

Role of Charges of the Surface-grafted Polymer Chains for Aqueous Lubrication at a Nonpolar Interface

Room-Temperature, Aqueous-Phase Fabrication of Poly(methacrylic acid) Brushes by UV-LED-Induced, Controlled Radical Polymerization with High Selectivity for Surface-Bound Species

Self-healing behavior of a polyelectrolyte-based lubricant additive for aqueous lubrication of oxide materials

Self-restoring polymer brushes under tribological stress and the biomedical applications

Slippery when sticky: Lubricating properties of thin films of Taxus baccata aril mucilage

scientific article published on 22 March 2016

Spatial Tuning of the Metal Work Function by Means of Alkanethiol and Fluorinated Alkanethiol Gradients

Spectroscopic studies of the interactions between β-lactoglobulin and bovine submaxillary mucin

Spiroalkanedithiol-Based SAMs Reveal Unique Insight into the Wettabilities and Frictional Properties of Organic Thin Films

scientific article published in 2000

Structural and Mechanical Properties of Thin Films of Bovine Submaxillary Mucin versus Porcine Gastric Mucin on a Hydrophobic Surface in Aqueous Solutions

scientific article published on 5 September 2016

Structural characterization and frictional properties of C60-terminated self-assembled monolayers on Au(111)

Structure, Wettability, and Frictional Properties of Phenyl-Terminated Self-Assembled Monolayers on Gold

Submicrometer Structure of Surface-Chemical Gradients Prepared by a Two-Step Immersion Method

scientific article published on 01 March 2006

Sweet, Hairy, Soft, and Slippery

scientific article

Synthesis, Characterization, and Aqueous Lubricating Properties of Amphiphilic Graft Copolymers Comprising 2-Methoxyethyl Acrylate

The Adsorption of Unsymmetrical Spiroalkanedithiols onto Gold Affords Multi-Component Interfaces that Are Homogeneously Mixed at the Molecular Level

scientific article published in 2000

The Influence of Anchoring-Group Structure on the Lubricating Properties of Brush-Forming Graft Copolymers in an Aqueous Medium

The Influence of Molecular Architecture on the Macroscopic Lubrication Properties of the Brush-Like Co-polyelectrolyte Poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) Adsorbed on Oxide Surfaces

article published in 2003

The Influence of Packing Densities and Surface Order on the Frictional Properties of Alkanethiol Self-Assembled Monolayers (SAMs) on Gold: A Comparison of SAMs Derived from Normal and Spiroalkanedithiols

Thermostability of bovine submaxillary mucin (BSM) in bulk solution and at a sliding interface.

scientific article

Tribological properties of poly(L-lysine)-graft-poly(ethylene glycol) films: influence of polymer architecture and adsorbed conformation

scientific article published in June 2009

List of works by Seunghwan Lee

"Bio-glues" to enhance slipperiness of mucins: improved lubricity and wear resistance of porcine gastric mucin (PGM) layers assisted by mucoadhesion with chitosan.

A Preliminary Study to Enhance the Tribological Performance of CoCrMo Alloy by Fibre Laser Remelting for Articular Joint Implant Applications

A Simple, Reproducible Approach to the Preparation of Surface-Chemical Gradients

A Tribological Model for Chocolate in the Mouth: General Implications for Slurry-Lubricated Hard/Soft Sliding Counterfaces

A biomimetic alternative to poly(ethylene glycol) as an antifouling coating: resistance to nonspecific protein adsorption of poly(L-lysine)-graft-dextran

A catheter friction tester using balance sensor: Combined evaluation of the effects of mechanical properties of tubing materials and surface coatings

A novel low-friction surface for biomedical applications: modification of poly(dimethylsiloxane) (PDMS) with polyethylene glycol(PEG)-DOPA-lysine

A simplified chromatographic approach to purify commercially available bovine submaxillary mucins (BSM).

Adsorption and Lubricating Properties of Poly(l-lysine)-graft-poly(ethylene glycol) on Human-Hair Surfaces

Adsorption and aqueous lubricating properties of charged and neutral amphiphilic diblock copolymers at a compliant, hydrophobic interface

Adsorption and nanowear properties of bovine submaxillary mucin films on solid surfaces: influence of solution pH and substrate hydrophobicity

Adsorption properties of poly(l-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG) at a hydrophobic interface: influence of tribological stress, pH, salt concentration, and polymer molecular weight

An Aqueous-Based Surface Modification of Poly(dimethylsiloxane) with Poly(ethylene glycol) to Prevent Biofouling

Aqueous Lubrication of SiC and Si3N4 Ceramics Aided by a Brush-like Copolymer Additive, Poly(l-lysine)-graft-poly(ethylene glycol)

Aqueous lubricating properties of charged (ABC) and neutral (ABA) triblock copolymer chains

Aqueous lubrication of polymers: Influence of surface modification

Bacterially induced degradation of aqueous solutions of poly(l-lysine)-graft-poly(ethylene glycol) and poly(l-lysine)-graft-dextran: consequences for their lubrication properties

Chemical modification of the interfacial frictional properties of vanadium carbide through ethanol adsorption

Chocolate at a Sliding Interface

Complexation and synergistic boundary lubrication of porcine gastric mucin and branched poly(ethyleneimine) in neutral aqueous solution

Compressed collagen constructs with optimized mechanical properties and cell interactions for tissue engineering applications

Conformation of bovine submaxillary mucin layers on hydrophobic surface as studied by biomolecular probes.

End-grafted Sugar Chains as Aqueous Lubricant Additives: Synthesis and Macrotribological Tests of Poly(l-lysine)-graft-Dextran (PLL-g-dex) Copolymers

Enhancement of wear and corrosion resistance of beta titanium alloy by laser gas alloying with nitrogen

Enhancing the antibacterial performance of orthopaedic implant materials by fibre laser surface engineering

Feasibility of Bovine Submaxillary Mucin (BSM) Films as Biomimetic Coating for Polymeric Biomaterials

Fibre laser nitriding of titanium and its alloy in open atmosphere for orthopaedic implant applications: Investigations on surface quality, microstructure and tribological properties

Frictional properties of titanium carbide, titanium nitride, and vanadium carbide: Measurement of a compositional dependence with atomic force microscopy

Gastric mucus and mucuslike hydrogels: Thin film lubricating properties at soft interfaces

Hydrophobins as aqueous lubricant additive for a soft sliding contact

In Vitro Urethra Model to Characterize the Frictional Properties of Urinary Catheters

Influence of Molecular Architecture on the Adsorption of Poly(ethylene oxide)−Poly(propylene oxide)−Poly(ethylene oxide) on PDMS Surfaces and Implications for Aqueous Lubrication

Influence of Salt on the Aqueous Lubrication Properties of End-Grafted, Ethylene Glycol-Based Self-Assembled Monolayers

Influence of Temperature on the Frictional Properties of Water-Lubricated Surfaces

Influence of impurities and contact scale on the lubricating properties of bovine submaxillary mucin (BSM) films on a hydrophobic surface.

Innovative Methods and Applications in Mucoadhesion Research. ⬇️

Interaction of porcine gastric mucin (PGM) with rigid nanoparticles (NPs) in neutral aqueous solution and its impact on the lubricating properties of PGM

Interaction of porcine gastric mucin with various polycations and its influence on the boundary lubrication properties

Interfacial Properties of Specifically Fluorinated Self-Assembled Monolayer Films

Interfacial shear rheology of β-lactoglobulin-Bovine submaxillary mucin layers adsorbed at air/water interface

Investigation of the Thermostability of Bovine Submaxillary Mucin (BSM) and its Impact on Lubrication

Investigation of the interaction between mucins and β-lactoglobulin under tribological stress

Lubrication Properties of a Brushlike Copolymer as a Function of the Amount of Solvent Absorbed within the Brush

Lubrication of soft and hard interfaces with thermo-responsive F127 hydrogel

Macroscopic Tribological Testing of Alkanethiol Self-assembled Monolayers (SAMs): Pin-on-disk Tribometry with Elastomeric Sliding Contacts

Modeling and simulation in tribology across scales: An overview

Molecular Structure and Equilibrium Forces of Bovine Submaxillary Mucin Adsorbed at a Solid–Liquid Interface

Nanochemical surface analyzer in CMOS technology.

Nanomechanics of electrospun phospholipid fiber

Nucleation and growth of chemical beam epitaxy gallium nitride thin films

Poly(L-lysine)-grafted-poly(ethylene glycol)-based surface-chemical gradients. Preparation, characterization, and first applications

Poly(l-lysine)-graft-poly(ethylene glycol): a versatile aqueous lubricant additive for tribosystems involving thermoplastics

Porcine Gastric Mucin (PGM) at the Water/Poly(Dimethylsiloxane) (PDMS) Interface: Influence of pH and Ionic Strength on Its Conformation, Adsorption, and Aqueous Lubrication Properties

Preferential Solvation and Its Effect on the Lubrication Properties of a Surface-Bound, Brushlike Copolymer

Proteolytic Degradation of Bovine Submaxillary Mucin (BSM) and Its Impact on Adsorption and Lubrication at a Hydrophobic Surface.

Reduction in friction and wear of alumina surfaces as assisted with surface-adsorbing polymers in aqueous solutions

Role of Charges of the Surface-grafted Polymer Chains for Aqueous Lubrication at a Nonpolar Interface

Room-Temperature, Aqueous-Phase Fabrication of Poly(methacrylic acid) Brushes by UV-LED-Induced, Controlled Radical Polymerization with High Selectivity for Surface-Bound Species

Self-healing behavior of a polyelectrolyte-based lubricant additive for aqueous lubrication of oxide materials

Self-restoring polymer brushes under tribological stress and the biomedical applications

Slippery when sticky: Lubricating properties of thin films of Taxus baccata aril mucilage

Spatial Tuning of the Metal Work Function by Means of Alkanethiol and Fluorinated Alkanethiol Gradients

Spectroscopic studies of the interactions between β-lactoglobulin and bovine submaxillary mucin

Spiroalkanedithiol-Based SAMs Reveal Unique Insight into the Wettabilities and Frictional Properties of Organic Thin Films

Structural and Mechanical Properties of Thin Films of Bovine Submaxillary Mucin versus Porcine Gastric Mucin on a Hydrophobic Surface in Aqueous Solutions

Structural characterization and frictional properties of C60-terminated self-assembled monolayers on Au(111)

Structure, Wettability, and Frictional Properties of Phenyl-Terminated Self-Assembled Monolayers on Gold

Submicrometer Structure of Surface-Chemical Gradients Prepared by a Two-Step Immersion Method

Sweet, Hairy, Soft, and Slippery

Synthesis, Characterization, and Aqueous Lubricating Properties of Amphiphilic Graft Copolymers Comprising 2-Methoxyethyl Acrylate

The Adsorption of Unsymmetrical Spiroalkanedithiols onto Gold Affords Multi-Component Interfaces that Are Homogeneously Mixed at the Molecular Level

The Influence of Anchoring-Group Structure on the Lubricating Properties of Brush-Forming Graft Copolymers in an Aqueous Medium

The Influence of Molecular Architecture on the Macroscopic Lubrication Properties of the Brush-Like Co-polyelectrolyte Poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) Adsorbed on Oxide Surfaces

The Influence of Packing Densities and Surface Order on the Frictional Properties of Alkanethiol Self-Assembled Monolayers (SAMs) on Gold: A Comparison of SAMs Derived from Normal and Spiroalkanedithiols

Thermostability of bovine submaxillary mucin (BSM) in bulk solution and at a sliding interface.

Tribological properties of poly(L-lysine)-graft-poly(ethylene glycol) films: influence of polymer architecture and adsorbed conformation

Ultralow Friction with Hydrophilic Polymer Brushes in Water as Segregated from Silicone Matrix