List of works - Luigi La Barbera

ASTM F1717 standard for the preclinical evaluation of posterior spinal fixators: can we improve it?

scientific article

Biomechanical advantages of supplemental accessory and satellite rods with and without interbody cages implantation for the stabilization of pedicle subtraction osteotomy

scientific article published on 08 May 2018

Biomechanical in vitro comparison between anterior column realignment and pedicle subtraction osteotomy for severe sagittal imbalance correction

scientific article published on 14 August 2019

Biomechanical in vitro evaluation of two full-arch rehabilitations supported by four or five implants.

scientific article published in March 2015

Comparative analysis of international standards for the fatigue testing of posterior spinal fixation systems.

scientific article

Comparative analysis of international standards for the fatigue testing of posterior spinal fixation systems: the importance of preload in ISO 12189.

scientific article published on 30 July 2015

Computational and experimental fatigue analysis of contoured spinal rods

scientific article published on 07 February 2019

Digital Image Correlation (DIC) Assessment of the Non-Linear Response of the Anterior Longitudinal Ligament of the Spine during Flexion and Extension

scientific article published on 14 January 2020

Does soccer cleat design influence the rotational interaction with the playing surface?

scientific article published on 01 September 2013

Global stiffness and residual stresses in spinal fixator systems: A validated finite element study on the interconnection mechanism

scientific article published in 2022

ISO 12189 standard for the preclinical evaluation of posterior spinal stabilization devices--I: Assembly procedure and validation.

scientific article published on 17 December 2015

ISO 12189 standard for the preclinical evaluation of posterior spinal stabilization devices--II: A parametric comparative study.

scientific article published on 15 December 2015

Instrumentation failure following pedicle subtraction osteotomy: the role of rod material, diameter, and multi-rod constructs.

scientific article published on 17 November 2016

Modeling three-dimensional-printed trabecular metal structures with a homogenization approach: Application to hemipelvis reconstruction

scientific article published on 23 May 2019

Planning the Surgical Correction of Spinal Deformities: Toward the Identification of the Biomechanical Principles by Means of Numerical Simulation.

scientific article published on 3 November 2015

Preclinical evaluation of posterior spine stabilization devices: can the current standards represent basic everyday life activities?

scientific article published on 28 May 2016

Preclinical evaluation of posterior spine stabilization devices: can we compare in vitro and in vivo loads on the instrumentation?

scientific article published on 16 September 2016

Primary stability of pedicle screws depends on the screw positioning and alignment

scientific article published on 14 May 2013

Reply to the letter to the editor entitled: response to "comparative analysis of international standards for the fatigue testing of posterior spinal fixation systems"

scientific article published on 20 November 2014

Residual stresses in titanium spinal rods: effects of two contouring methods and material plastic properties

scientific article published on 31 May 2018

Rotational and peak torque stiffness of rugby shoes.

scientific article published on 11 July 2014

Stent Screw-Assisted Internal Fixation (SAIF) of Severe Lytic Spinal Metastases: A Comparative Finite Element Analysis of the SAIF Technique

scientific article published on 25 April 2019

Stent screw-assisted internal fixation (SAIF): clinical report of a novel approach to stabilizing and internally fixating vertebrae destroyed by malignancy

scientific article published on 20 December 2019

Stent-Screw Assisted Internal Fixation of Osteoporotic Vertebrae: A Comparative Finite Element Analysis on SAIF Technique

scientific article published on 25 October 2019

The strain distribution in the lumbar anterior longitudinal ligament is affected by the loading condition and bony features: An in vitro full-field analysis