A Novel Cathode Material with a Concentration-Gradient for High-Energy and Safe Lithium-Ion Batteries

A Separate Style of Stainless Steel Bipolar Plate for PEMFC and its Corrosion Behavior

A new pre-sodiation additive for sodium-ion batteries

A new synthetic method of titanium oxyfluoride and its application as an anode material for rechargeable lithium batteries

scholarly article by Seung-Taek Myung et al published August 2015 in Journal of Power Sources

A novel concentration-gradient Li[Ni0.83Co0.07Mn0.10]O2 cathode material for high-energy lithium-ion batteries

Advanced Na[Ni0.25Fe0.5Mn0.25]O2/C-Fe3O4 sodium-ion batteries using EMS electrolyte for energy storage

scientific article

AlF3-coated LiCoO2 and Li[Ni1/3Co1/3Mn1/3]O2 blend composite cathode for lithium ion batteries

article published in 2011

An advanced sodium-ion rechargeable battery based on a tin–carbon anode and a layered oxide framework cathode

An effective method to reduce residual lithium compounds on Ni-rich Li[Ni0.6Co0.2Mn0.2]O2 active material using a phosphoric acid derived Li3PO4 nanolayer

article published in 2014

An exceptionally large energy cathode with the K–SO4–Cu conversion reaction for potassium rechargeable batteries

Anatase Titania Nanorods as an Intercalation Anode Material for Rechargeable Sodium Batteries

Applicability of extra low interstitials ferritic stainless steels for bipolar plates of proton exchange membrane fuel cells

Application of Ni-free high nitrogen stainless steel for bipolar plates of proton exchange membrane fuel cells

Are type 316L stainless steel coin cells stable in nonaqueous carbonate solutions containing NaPF6 or KPF6 salt?

Bioinspired Surface Layer for the Cathode Material of High-Energy-Density Sodium-Ion Batteries

Black anatase titania enabling ultra high cycling rates for rechargeable lithium batteries

Capacity fading of LiMn2O4 electrode synthesized by the emulsion drying method

Carbon-Coated Magnetite Embedded on Carbon Nanotubes for Rechargeable Lithium and Sodium Batteries

Carbon-coated Li 4 Ti 5 O 12 nanowires showing high rate capability as an anode material for rechargeable sodium batteries

Carbon-coated anatase titania as a high rate anode for lithium batteries

article published in 2015

Carbothermal synthesis of molybdenum(IV) oxide as a high rate anode for rechargeable lithium batteries

Cathode Materials for Future Electric Vehicles and Energy Storage Systems

Co-Free Layered Cathode Materials for High Energy Density Lithium-Ion Batteries

Co-precipitation synthesis of micro-sized spherical LiMn0.5Fe0.5PO4 cathode material for lithium batteries

Co-precipitation synthesis of spherical Li1.05M0.05Mn1.9O4 (M=Ni, Mg, Al) spinel and its application for lithium secondary battery cathode

Cobalt-free nickel rich layered oxide cathodes for lithium-ion batteries

scientific article published on 31 October 2013

Comparative Study of Ni-Rich Layered Cathodes for Rechargeable Lithium Batteries: Li[Ni0.85Co0.11Al0.04]O2 and Li[Ni0.84Co0.06Mn0.09Al0.01]O2 with Two-Step Full Concentration Gradients

Compositionally Graded Cathode Material with Long-Term Cycling Stability for Electric Vehicles Application

article

Confinement of nanosized tin(IV) oxide particles on rGO sheets and its application to sodium-ion full cells as a high capacity anode material

Controllable charge capacity using a black additive for high-energy-density sodium-ion batteries

Conversion chemistry of cobalt oxalate for sodium storage

scientific article published on 14 November 2018

Correction: Resolving the degradation pathways of the O3-type layered oxide cathode surface through the nano-scale aluminum oxide coating for high-energy density sodium-ion batteries

scholarly article by Jang-Yeon Hwang et al published 2018 in Journal of Materials Chemistry A

Corrigendum to “Nanostructured cathode materials for rechargeable lithium batteries” [J. Power Sources 283 (2015) 219–236]

scientific article

Corrosion behavior of austenitic stainless steels as a function of pH for use as bipolar plates in polymer electrolyte membrane fuel cells

Cycling Stability of Layered Potassium Manganese Oxide in Nonaqueous Potassium Cells

scientific article published on 26 July 2019

Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo(1/3)Ni(1/3)Mn(1/3)O2.

scientific article published on 4 March 2011

Development of K4Fe3(PO4)2(P2O7) as a novel Fe-based cathode with high energy densities and excellent cyclability in rechargeable potassium batteries

Development of Na2FePO4F/Conducting-Polymer composite as an exceptionally high performance cathode material for Na-ion batteries

Development of P3-K0.69CrO2 as an ultra-high-performance cathode material for K-ion batteries

Development of a New Mixed-Polyanion Cathode with Superior Electrochemical Performances for Na-Ion Batteries

Development of a new alluaudite-based cathode material with high power and long cyclability for application in Na ion batteries in real-life

article

Development of high power lithium-ion batteries: Layer Li[Ni0.4Co0.2Mn0.4]O2 and spinel Li[Li0.1Al0.05Mn1.85]O4

article

Direct observation of the passive layer on high nitrogen stainless steel used as bipolar plates for proton exchange membrane fuel cells

Double Carbon Coating of LiFePO4 as High Rate Electrode for Rechargeable Lithium Batteries

scholarly article by Sung Woo Oh et al published 20 July 2010 in Advanced Materials

Double-structured LiMn(0.85)Fe(0.15)PO4 coordinated with LiFePO4 for rechargeable lithium batteries.

scientific article

Dual functioned BiOF-coated Li[Li0.1Al0.05Mn1.85]O4 for lithium batteries

article

Effect of AlF3Coating on Thermal Behavior of Chemically Delithiated Li0.35[Ni1/3Co1/3Mn1/3]O2

Effect of Lithium in Transition Metal Layers of Ni-Rich Cathode Materials on Electrochemical Properties

Effect of Manganese Content on the Electrochemical and Thermal Stabilities of Li[Ni[sub 0.58]Co[sub 0.28−x]Mn[sub 0.14+x]]O[sub 2] Cathode Materials for Lithium-Ion Batteries

Effect of Mn in Li3V2-xMnx(PO4)3 as High Capacity Cathodes for Lithium Batteries.

scientific article published on 31 October 2017

Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2

article published in 2014

Effect of anatase phase on electrochemical properties of the TiO2(B) negative electrode for lithium-ion battery application

Effect of carbon-sulphur bond in a sulphur/dehydrogenated polyacrylonitrile/reduced graphene oxide composite cathode for lithium-sulphur batteries

Effect of fluorine on Li[Ni1/3Co1/3Mn1/3]O2−zFz as lithium intercalation material

Effect of nickel and iron on structural and electrochemical properties of O3 type layer cathode materials for sodium-ion batteries

scholarly article by Jang-Yeon Hwang et al published August 2016 in Journal of Power Sources

Effect of protecting metal oxide (Co3O4) layer on electrochemical properties of spinel Li1.1Mn1.9O4 as a cathode material for lithium battery applications

Effect of titanium addition as nickel oxide formation inhibitor in nickel-rich cathode material for lithium-ion batteries

article

Effects of Al doping on the microstructure of LiCoO2 cathode materials

Effects of Co doping on Li[Ni0.5CoxMn1.5−x]O4 spinel materials for 5V lithium secondary batteries via Co-precipitation

article published in 2009

Effects of Molybdenum Doping on the Layered Li[Ni0.5+xMn0.5−2xMox]O2Cathode Materials for Lithium Secondary Batteries

Effects of manganese and cobalt on the electrochemical and thermal properties of layered Li[Ni0.52Co0.16+xMn0.32−x]O2 cathode materials

scholarly article by Hyoung-Geun Kim et al published August 2011 in Journal of Power Sources

Efficient recycling of valuable resources from discarded lithium-ion batteries

Electrochemical Properties of Polyaniline-Coated Li-Rich Nickel Manganese Oxide and Role of Polyaniline Coating Layer

scholarly article by Dae-hyun Cho et al published 26 November 2013 in Journal of the Electrochemical Society

Electrochemical behavior and passivation of current collectors in lithium-ion batteries

Electrochemical behavior of Al in a non-aqueous alkyl carbonate solution containing LiBOB salt

article

Electrochemical behavior of current collectors for lithium batteries in non-aqueous alkyl carbonate solution and surface analysis by ToF-SIMS

article

Electrochemical evaluation of mixed oxide electrode for Li-ion secondary batteries: Li1.1Mn1.9O4 and LiNi0.8Co0.15Al0.05O2

Electrochemical properties of the TiO2(B) powders ball mill treated for lithium-ion battery application

scientific article

Electrochemical stability of aluminum current collector in alkyl carbonate electrolytes containing lithium bis(pentafluoroethylsulfonyl)imide for lithium-ion batteries

scholarly article by Seung-Taek Myung & Hitoshi Yashiro published December 2014 in Journal of Power Sources

Emulsion drying synthesis of olivine LiFePO4/C composite and its electrochemical properties as lithium intercalation material

Enhanced electrochemical performance of carbon–LiMn1−xFexPO4 nanocomposite cathode for lithium-ion batteries

Evaluation of polymer electrolyte membrane fuel cells by electrochemical impedance spectroscopy under different operation conditions and corrosion

Exceptional Effect of Benzene in Uniform Carbon Coating of SiOxNanocomposite for High-Performance Li-Ion Batteries

Extending the Battery Life Using an Al-Doped Li[Ni0.76Co0.09Mn0.15]O2 Cathode with Concentration Gradients for Lithium Ion Batteries

Facile migration of potassium ions in a ternary P3-type K0.5[Mn0.8Fe0.1Ni0.1]O2 cathode in rechargeable potassium batteries

Formation of a Continuous Solid-Solution Particle and its Application to Rechargeable Lithium Batteries

Functionality of Oxide Coating for Li[Li0.05Ni0.4Co0.15Mn0.4]O2as Positive Electrode Materials for Lithium-Ion Secondary Batteries

Graphene Decorated by Indium Sulfide Nanoparticles as High-Performance Anode for Sodium-Ion Batteries

scientific article published on 19 June 2017

High Capacity O3-Type Na[Li0.05(Ni0.25Fe0.25Mn0.5)0.95]O2 Cathode for Sodium Ion Batteries

article

High Electrochemical Li Intercalation in Titanate Nanotubes

High Voltage Stability in KFSI Nonaqueous Carbonate Solution for Potassium-Ion Battery: Current Collectors and Coin-Cell Components

scientific article published on 03 September 2020

High nitrogen stainless steel as bipolar plates for proton exchange membrane fuel cells

High voltage retainable Ni-saving high nitrogen stainless steel bipolar plates for proton exchange membrane fuel cells: Phenomena and mechanism

High-Energy Layered Oxide Cathodes with Thin Shells for Improved Surface Stability

article

High-energy cathode material for long-life and safe lithium batteries.

scientific article published on 22 March 2009

High-energy-density lithium-ion battery using a carbon-nanotube–Si composite anode and a compositionally graded Li[Ni0.85Co0.05Mn0.10]O2 cathode

article

High-voltage performance of concentration-gradient Li[Ni0.67Co0.15Mn0.18]O2 cathode material for lithium-ion batteries

Highly enhancement of the SiO nanocomposite through Ti-doping and carbon-coating for high-performance Li-ion battery

Hollandite-type Al-doped VO1.52(OH)0.77 as a zinc ion insertion host material

Hydrothermal Synthesis of Layered Li[Ni0.5Mn0.5]O2as Lithium Intercalation Material

Hydrothermal Synthesis of Orthorhombic LiCo[sub x]Mn[sub 1−x]O[sub 2] and Their Structural Changes during Cycling

Hydrothermal synthesis and electrochemical behavior of orthorhombic LiMnO2

Hydrothermal synthesis of layered Li[Ni1/3Co1/3Mn1/3]O2 as positive electrode material for lithium secondary battery

Impact of Na2MoO4 nanolayers autogenously formed on tunnel-type Na0.44MnO2

scientific article

Improved Electrochemical Cycling Behavior of ZnO-Coated Li[sub 1.05]Al[sub 0.1]Mn[sub 1.85]O[sub 3.95]F[sub 0.05] Spinel at 55°C

article

Improved electrochemical properties of BiOF-coated 5V spinel Li[Ni0.5Mn1.5]O4 for rechargeable lithium batteries

Improvement of High Voltage Cycling Performances of Li[Ni[sub 1/3]Co[sub 1/3]Mn[sub 1/3]]O[sub 2] at 55°C by a (NH[sub 4])[sub 3]AlF[sub 6] Coating

article

Improvement of cycling performance of Li1.1Mn1.9O4 at 60°C by NiO addition for Li-ion secondary batteries

article

Improvement of electrochemical properties of Li1.1Al0.05Mn1.85O4 achieved by an AlF3 coating

Improvement of structural integrity and battery performance of LiNi0.5Mn0.5O2 by Al and Ti doping

Improvement of the Electrochemical Properties of Li[Ni[sub 0.5]Mn[sub 0.5]]O[sub 2] by AlF[sub 3] Coating

article

Iron trifluoride synthesized via evaporation method and its application to rechargeable lithium batteries

KTi2 (PO4 )3 Electrode with a Long Cycling Stability for Potassium-Ion Batteries

scientific article published on 24 April 2020

Lattice parameter as a measure of electrochemical properties of LiMn2O4

article published in 2001

Layered K0.28MnO2·0.15H2O as a Cathode Material for Potassium-Ion Intercalation

scientific article published on 07 November 2019

LiNi[sub 0.5]Mn[sub 1.5]O[sub 4] Showing Reversible Phase Transition on 3 V Region

article

Low Temperature Electrochemical Properties of Li[NixCoyMn1-x-y]O2Cathode Materials for Lithium-Ion Batteries

Marcasite iron sulfide as a high-capacity electrode material for sodium storage

article published in 2018

Microscale Core-Shell Structured Li[(Ni[sub 0.8]Co[sub 0.1]Mn[sub 0.1])[sub 0.8](Ni[sub 0.5]Mn[sub 0.5])[sub 0.2]]O[sub 2] as Positive Electrode Material for Lithium Batteries

Microscale spherical carbon-coated Li4Ti5O12 as ultra high power anode material for lithium batteries

Microstructural Effect of Carbon Blacks for the Application in Lithium Ion Batteries

Microwave Synthesis of Spherical Li[Ni0.4Co0.2Mn0.4]O2Powders as a Positive Electrode Material for Lithium Batteries

Monoclinic Fe2(SO4)3: A new Fe-based cathode material with superior electrochemical performances for Na-ion batteries

Na2Fe2F7: a fluoride-based cathode for high power and long life Na-ion batteries

NaCrO2 cathode for high-rate sodium-ion batteries

Nano-crystalline LiNi0.5Mn1.5O4 synthesized by emulsion drying method

scholarly article by Seung-Taek Myung et al published June 2002 in Electrochimica Acta

Nanoparticle TiN-coated type 310S stainless steel as bipolar plates for polymer electrolyte membrane fuel cell

article published in 2008

Nanoporous Structured LiFePO[sub 4] with Spherical Microscale Particles Having High Volumetric Capacity for Lithium Batteries

Nanorod and nanoparticle shells in concentration gradient core-shell lithium oxides for rechargeable lithium batteries.

scientific article published on 10 July 2014

Nanosized TiN–SBR hybrid coating of stainless steel as bipolar plates for polymer electrolyte membrane fuel cells

Nanostructured Anode Material for High-Power Battery System in Electric Vehicles

Nanostructured TiO2 and Its Application in Lithium-Ion Storage

Nanostructured cathode materials for rechargeable lithium batteries

Nanostructured high-energy cathode materials for advanced lithium batteries

scientific article published on 07 October 2012

Nature-Derived Cellulose-Based Composite Separator for Sodium-Ion Batteries

scientific article published on 10 March 2020

Nb-Doped titanium phosphate for sodium storage: electrochemical performance and structural insights

scientific article

New Insight into Ethylenediaminetetraacetic Acid Tetrasodium Salt as a Sacrificing Sodium Ion Source for Sodium-Deficient Cathode Materials for Full Cells

scientific article published on 31 January 2019

New conversion chemistry of CuSO4 as ultra-high-energy cathode material for rechargeable sodium battery

Nickel oxalate dihydrate nanorods attached to reduced graphene oxide sheets as a high-capacity anode for rechargeable lithium batteries

scholarly article by Hyo-Jin Oh et al published May 2016 in NPG Asia materials

Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives

scholarly article by Seung-Taek Myung et al published 23 December 2016 in ACS Energy Letters

Nickel-Rich and Lithium-Rich Layered Oxide Cathodes: Progress and Perspectives

scholarly article by Arumugam Manthiram et al published 7 October 2015 in Advanced Energy Materials

Nondestructive Evaluation of Concrete Environment against Corrosion of Reinforcing Bar Using the Magnetic Corrosion Probe

Novel Cathode Materials for Na-Ion Batteries Composed of Spoke-Like Nanorods of Na[Ni0.61Co0.12Mn0.27]O2Assembled in Spherical Secondary Particles

Novel core-shell-structured Li[(Ni0.8Co0.2)0.8(Ni0.5Mn0.5)0.2]O2 via coprecipitation as positive electrode material for lithium secondary batteries

scientific article published in April 2006

Olivine LiCoPO4–carbon composite showing high rechargeable capacity

article published in 2012

Open-Structured Vanadium Dioxide as an Intercalation Host for Zn Ions: Investigation by First-Principles Calculation and Experiments

Optimization of Layered Cathode Material with Full Concentration Gradient for Lithium-Ion Batteries

Optimization of microwave synthesis of Li[Ni0.4Co0.2Mn0.4]O2 as a positive electrode material for lithium batteries

Oxalate-Based High-Capacity Conversion Anode for Potassium Storage

P2-Na2/3MnO2 by Co Incorporation: As a Cathode Material of High Capacity and Long Cycle Life for Sodium-Ion Batteries

scientific article published on 31 July 2019

Passivation behavior of Type 304 stainless steel in a non-aqueous alkyl carbonate solution containing LiPF6 salt

Passivation of aluminum current collectors in non-aqueous carbonate solutions containing sodium or potassium hexafluorophosphate salts

scientific article

Performance improvement of liquid phase plasma processed carbon blacks electrode in lithium ion battery applications

Polyvinylpyrrolidone-assisted synthesis of microscale C-LiFePO4 with high tap density as positive electrode materials for lithium batteries

Potassium vanadate as a new cathode material for potassium-ion batteries

Preparation and characterization of LiMn2O4 powders by the emulsion drying method

article

Preparation of carbon blacks by liquid phase plasma (LPP) process

scientific article published in November 2013

Preparation of layered LiMnxCr1−xO2 solid solution by emulsion drying method as lithium intercalation compounds

Present and Future Perspective on Electrode Materials for Rechargeable Zinc-Ion Batteries

Progress in High-Capacity Core-Shell Cathode Materials for Rechargeable Lithium Batteries.

scientific article

Quaternary Transition Metal Oxide Layered Framework: O3-Type Na[Ni0.32Fe0.13Co0.15Mn0.40]O2 Cathode Material for High-Performance Sodium-Ion Batteries

Radially aligned hierarchical columnar structure as a cathode material for high energy density sodium-ion batteries.

scientific article published on 17 April 2015

Re-heating effect of Ni-rich cathode material on structure and electrochemical properties

Recent Progress in Rechargeable Potassium Batteries

Reducing cobalt from lithium-ion batteries for the electric vehicle era

Resolving the degradation pathways of the O3-type layered oxide cathode surface through the nano-scale aluminum oxide coating for high-energy density sodium-ion batteries

scholarly article by Jang-Yeon Hwang et al published 2017 in Journal of Materials Chemistry A

Reversible NaFePO4 electrode for sodium secondary batteries

Revisit of layered sodium manganese oxides: achievement of high energy by Ni incorporation

Rocksalt-type metal sulfide anodes for high-rate sodium storage

Role of Alumina Coating on Li−Ni−Co−Mn−O Particles as Positive Electrode Material for Lithium-Ion Batteries

scholarly article by Seung-Taek Myung et al published July 2005 in Chemistry of Materials

Role of the Mn substituent in Na3V2(PO4)3 for high-rate sodium storage

Sodium-Ion Batteries: Building Effective Layered Cathode Materials with Long-Term Cycling by Modifying the Surface via Sodium Phosphate

Sodium-ion batteries: present and future

scientific article published on 28 March 2017

Spherical core-shell Li[(Li0.05Mn0.95)0.8(Ni0.25Mn0.75)0.2]2O4 spinels as high performance cathodes for lithium batteries

article published in 2011

Spinel lithium manganese oxide synthesized under a pressurized oxygen atmosphere

Stability of type 310S stainless steel bipolar plates tested at various current densities in proton exchange membrane fuel cells

Structural Investigation of Layered Li[sub 1−δ]Mn[sub x]Cr[sub 1−x]O[sub 2] by XANES and In Situ XRD Measurements

Structural Stability of LiNiO2 Cycled above 4.2 V

article published in 2017

Structural, Electrochemical, and Thermal Aspects of Li[(Ni[sub 0.5]Mn[sub 0.5])[sub 1−x]Co[sub x]]O[sub 2] (0≤x≤0.2) for High-Voltage Application of Lithium-Ion Secondary Batteries

Surface Properties of Stainless Steel Cathodically Treated in Nitrate Solution and its Application to PEFC Bipolar Plates

Surface coating effect on thermal properties of delithiated lithium nickel manganese layer oxide

scholarly article by Chang-Heum Jo et al published May 2015 in Journal of Power Sources

Surface modification of cathode materials from nano- to microscale for rechargeable lithium-ion batteries

scholarly article by Seung-Taek Myung et al published 2010 in Journal of Materials Chemistry

Synthesis and Electrochemical Reaction of Tin Oxalate-Reduced Graphene Oxide Composite Anode for Rechargeable Lithium Batteries

scientific article published on 18 July 2017

Synthesis and Electrochemical Reaction of a Pitch Carbon-Coated Zinc Vanadium Oxide Anode with Excellent Electrochemical Performance for Rechargeable Lithium Batteries

Synthesis and characterization of Li[(Ni0.8Co0.1Mn0.1)0.8(Ni0.5Mn0.5)0.2]O2 with the microscale core-shell structure as the positive electrode material for lithium batteries

scientific article published in September 2005

Synthesis and electrochemical performances of core-shell structured Li[(Ni1/3Co1/3Mn1/3)0.8(Ni1/2Mn1/2)0.2]O2 cathode material for lithium ion batteries

article published in 2010

Synthesis of LiNi0.5Mn0.5-xTixO2by an Emulsion Drying Method and Effect of Ti on Structure and Electrochemical Properties

Synthesis of LiVOPO4 by Emulsion Drying Method for Use as an Anode Material for Rechargeable Lithium Batteries

scientific article published on 9 September 2016

Synthesis of Li[(Ni0.5Mn0.5)1-xLix]O2by Emulsion Drying Method and Impact of Excess Li on Structural and Electrochemical Properties

Synthesis of Li[Ni1/3Co1/3Mn1/3]O2−zFzvia Coprecipitation

article

Synthesis of Spherical Nano- to Microscale Core−Shell Particles Li[(Ni0.8Co0.1Mn0.1)1-x(Ni0.5Mn0.5)x]O2and Their Applications to Lithium Batteries

scholarly article by Yang-Kook Sun et al published October 2006 in Chemistry of Materials

Synthesis of spherical Li[Ni(1/3−z)Co(1/3−z)Mn(1/3−z)Mgz]O2 as positive electrode material for lithium-ion battery

Synthetic optimization of orthorhombic LiMnO2 by emulsion-drying method and cycling behavior as cathode material for Li-ion battery

article

The Conversion Chemistry for High-Energy Cathodes of Rechargeable Sodium Batteries

scientific article published on 11 October 2019

The Effect of Morphological Properties on the Electrochemical Behavior of High Tap Density C–LiFePO[sub 4] Prepared via Coprecipitation

The effects of calcination temperature on the electrochemical performance of LiMnPO4 prepared by ultrasonic spray pyrolysis

Thermal properties of fully delithiated olivines

Tunnel-type β-FeOOH cathode material for high rate sodium storage via a new conversion reaction

Ultrafast sodium storage in anatase TiO 2 nanoparticles embedded on carbon nanotubes

Ultrasonic spray pyrolysis of nano crystalline spinel LiMn2O4 showing good cycling performance in the 3V range

scholarly article by Sang-Ho Park et al published May 2006 in Electrochimica Acta

Understanding on the structural and electrochemical performance of orthorhombic sodium manganese oxides

scientific article

Unexpectedly high electrochemical performances of a monoclinic Na2.4V2(PO4)3/conductive polymer composite for Na-ion batteries

Unraveling the Role of Earth-Abundant Fe in the Suppression of Jahn-Teller Distortion of P'2-Type Na2/3MnO2: Experimental and Theoretical Studies

scientific article published on 16 November 2018

Vanadium dioxide – Reduced graphene oxide composite as cathode materials for rechargeable Li and Na batteries

article