Search filters

List of works by Cecilia Persson

A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement

scientific article

A ready-to-use acidic, brushite-forming calcium phosphate cement

A ready-to-use acidic, brushite-forming calcium phosphate cement

An evaluation of methods to determine the porosity of calcium phosphate cements

scientific article published on 25 April 2014

Assessing cement injection behaviour in cancellous bone: an in vitro study using flow models ⬇️

scientific article published on 9 June 2014

Biological and biomechanical effects of vancomycin and meropenem in acrylic bone cement

scientific article published on 14 April 2008

Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty: A human ex vivo study ⬇️

scientific article published on 30 June 2015

Brushite foams--the effect of Tween® 80 and Pluronic® F-127 on foam porosity and mechanical properties ⬇️

scientific article published on 23 January 2015

Calcium phosphate cements with strontium halides as radiopacifiers

scientific article published on 30 August 2013

Ceramic cement as a potential stand-alone treatment for bone fractures: An in vitro study of ceramic-bone composites

scientific article published on 2 April 2016

Changes in the drug release pattern of fresh and set simvastatin-loaded brushite cement

scientific article published on 14 August 2015

Comparative characterization of oligomeric precursors intended for injectable implants

Comparison of a quasi-dynamic and a static extraction method for the cytotoxic evaluation of acrylic bone cements.

scientific article published on 21 January 2016

Compressive fatigue properties of an acidic calcium phosphate cement-effect of phase composition.

scientific article

Compressive fatigue properties of commercially available standard and low-modulus acrylic bone cements intended for vertebroplasty

scientific article published on 08 March 2018

Compressive mechanical properties and cytocompatibility of bone-compliant, linoleic acid-modified bone cement in a bovine model

scientific article published on 15 January 2014

Compressive, diametral tensile and biaxial flexural strength of cutting-edge calcium phosphate cements

scientific article published on 2 April 2016

Direct and interactive effects of three variables on properties of PMMA bone cement for vertebral body augmentation

scientific article published on 28 April 2011

Dissolution behaviour of silicon nitride coatings for joint replacements ⬇️

scientific article published on 22 January 2016

Elastic properties and strain-to-crack-initiation of calcium phosphate bone cements: Revelations of a high-resolution measurement technique.

scientific article

Enhanced drug delivery of antibiotic-loaded acrylic bone cements using calcium phosphate spheres

scientific article published on 12 June 2015

Evaluation of a porosity measurement method for wet calcium phosphate cements

article published in 2015

Evaluation of bone formation in calcium phosphate scaffolds with μCT-method validation using SEM.

scientific article published on 17 July 2017

Evaluation of silicon nitride as a wear resistant and resorbable alternative for total hip joint replacement

scientific article

Fabrication and evaluation of SixNy coatings for total joint replacements

scientific article published on 12 June 2012

Fatigue performance of a high-strength, degradable calcium phosphate bone cement

scientific article published on 6 December 2017

Fretting of CoCrMo and Ti6Al4V alloys in modular prostheses ⬇️

Heparinization of Beta Tricalcium Phosphate: Osteo-immunomodulatory Effects

scientific article published on 21 December 2017

Impact of Biomimicry in the Design of Osteoinductive Bone Substitutes: Nanoscale Matters

scientific article published on 21 February 2019

In Situ Synchrotron X-ray Diffraction Analysis of the Setting Process of Brushite Cement: Reaction and Crystal Growth.

scientific article

In Vitro and In Vivo Response to Low-Modulus PMMA-Based Bone Cement.

scientific article published on 20 August 2015

In vivo response to a low-modulus PMMA bone cement in an ovine model

scientific article published on 17 March 2018

Inflammatory response to nano- and microstructured hydroxyapatite

scientific article

Influence of Substrate Heating and Nitrogen Flow on the Composition, Morphological and Mechanical Properties of SiNx Coatings Aimed for Joint Replacements

scientific article published on 13 February 2017

Influence of cement compressive strength and porosity on augmentation performance in a model of orthopedic screw pull-out

scientific article published on 13 October 2017

Influence of polymer addition on the mechanical properties of a premixed calcium phosphate cement

scientific article

Long-Term In Vitro Degradation of a High-Strength Brushite Cement in Water, PBS, and Serum Solution.

scientific article published on 26 October 2015

Long-term sensory disturbances after orbitozygomatic fractures.

scientific article published on 20 September 2016

Low-modulus PMMA bone cement modified with castor oil.

scientific article published on January 2011

Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements

scientific article published on 16 May 2013

Mechanical effects of the use of vancomycin and meropenem in acrylic bone cement

scientific article published in August 2006

Micrometer-Sized Magnesium Whitlockite Crystals in Micropetrosis of Bisphosphonate-Exposed Human Alveolar Bone

scientific article published on 11 September 2017

Multifunctional Polymer-Free Mineral Plastic Adhesives Formed by Multiple Noncovalent Bonds

scientific article published on 30 January 2020

Nano grain sized zirconia–silica glass ceramics for dental applications

Novel injectable biomaterials for bone augmentation based on isosorbide dimethacrylic monomers

scientific article published on 26 March 2014

Numerical description and experimental validation of a rheology model for non-Newtonian fluid flow in cancellous bone

scientific article published on 28 June 2013

Osteogenesis by foamed and 3D-printed nanostructured calcium phosphate scaffolds: Effect of pore architecture

scientific article published on 06 September 2018

Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds: Effect of Nanostructure and Pore Architecture.

scientific article published on 8 November 2017

Persistent diplopia after fractures involving the orbit related to nerve injury

scientific article published on 6 November 2014

Photocatalytic activity of low temperature oxidized Ti–6Al–4V

scientific article published on 06 March 2012

Poisson's ratio and strain rate dependency of the constitutive behavior of spinal dura mater

scientific article published on 20 January 2010

Polyhedral oligomeric silsesquioxane (POSS)–poly(ethylene glycol) (PEG) hybrids as injectable biomaterials

scientific article published on 11 April 2012

Porosity prediction of calcium phosphate cements based on chemical composition

scientific article published on 14 July 2015

Premixed calcium silicate cement for endodontic applications: injectability, setting time and radiopacity

scientific article published on July 2011

Radiopacity of tantalum-loaded acrylic bone cement

scientific article

Robocasting of biomimetic hydroxyapatite scaffolds using self-setting inks

scientific article published on 11 July 2014

STRAIN RATE DEPENDENCY OF THE CONSTITUTIVE BEHAVIOUR OF DURA MATER

article

Scavenging effect of Trolox released from brushite cements

scientific article

Si-Fe-C-N Coatings for Biomedical Applications: A Combinatorial Approach

scientific article published on 30 April 2020

Stiffness and strength of cranioplastic implant systems in comparison to cranial bone

scientific article published on 13 December 2017

Strain-induced stiffening of nanocellulose-reinforced poly(vinyl alcohol) hydrogels mimicking collagenous soft tissues

scientific article published on 15 May 2017

Strategies towards injectable, load-bearing materials for the intervertebral disc: a review and outlook

scientific article published on 29 September 2012

Surface and Subsurface Analyses of Metal-on-Polyethylene Total Hip Replacement Retrievals

scientific article published on 23 September 2015

Synthesis and characterization of injectable composites of poly[D,L-lactide-co-(ε-caprolactone)] reinforced with β-TCP and CaCO3 for intervertebral disk augmentation

scientific article published on October 2010

The Addition of Poly(Vinyl Alcohol) Fibers to Apatitic Calcium Phosphate Cement Can Improve Its Toughness

scientific article published on 10 May 2019

The Effect of Coating Density on Functional Properties of SiNx Coated Implants

scientific article published on 15 October 2019

The Effect of N, C, Cr, and Nb Content on Silicon Nitride Coatings for Joint Applications

scientific article published on 17 April 2020

The effect of bone fragment size and cerebrospinal fluid on spinal cord deformation during trauma: an ex vivo study

scientific article published in April 2009

The effect of composition on mechanical properties of brushite cements

scientific article published on 05 September 2013

The effect of oligo(trimethylene carbonate) addition on the stiffness of acrylic bone cement

scientific article published on 4 January 2016

The effect of unsaturated fatty acid and triglyceride oil addition on the mechanical and antibacterial properties of acrylic bone cements.

scientific article published on 14 April 2015

The importance of fluid-structure interaction in spinal trauma models

scientific article

Towards Functional Silicon Nitride Coatings for Joint Replacements

Trabecular deformations during screw pull-out: a micro-CT study of lapine bone.

scientific article published on 6 March 2017

Variation in calvarial bone healing capacity: a clinical study on the effects of BMP-2-hydrogel or bone autograft treatments at different cranial locations

scientific article published on 01 March 2013

Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications.

scientific article published on 23 July 2014

Young's modulus of trabecular bone at the tissue level: A review

scientific article published on 04 August 2018

Zebrafish embryo as a replacement model for initial biocompatibility studies of biomaterials and drug delivery systems

scientific article published on 01 October 2019

Paulina is supported by:

About Paulina

Help