Search filters

List of works by Dilhan M. Kalyon

A controllable way to measure the interfacial strength between carbon nanotube and polymer using a nanobridge structure

scholarly article in Carbon, vol. 116, May 2017

A hybrid twin screw extrusion/electrospinning method to process nanoparticle-incorporated electrospun nanofibres

scientific article

A nanobursa mesh: a graded electrospun nanofiber mesh with metal nanoparticles on carbon nanotubes

scientific article published on 01 August 2014

An Overview of the Rheological Behavior and Characterization of Energetic Formulations: Ramifications on Safety and Product Quality

article

An analytical model for steady coextrusion of viscoplastic fluids in thin slit dies with wall slip

article

An experimental investigation of capillary extrudate swell in relation to parison swell behavior in blow molding

scholarly article in Polymer Engineering and Science, vol. 26 no. 7, April 1986

An experimental study of distributive mixing in fully intermeshing, co-rotating twin screw extruders

article by Dilhan M. Kalyon & Harish N. Sangani published August 1989 in Polymer Engineering and Science

Analysis of nonisothermal screw extrusion processing of viscoplastic fluids with significant back flow

Anisotropy and dimensions of blow-molded polyethylene bottles

scholarly article in Polymer Engineering and Science, vol. 22 no. 5, April 1982

Apparent slip and viscoplasticity of concentrated suspensions

Axial annular flow of a viscoplastic microgel with wall slip

Axial laminar flow of viscoplastic fluids in a concentric annulus subject to wall slip

article by Dilhan M. Kalyon & Moinuddin Malik published 20 July 2012 in Rheologica Acta

Batch and continuous processing of polymer layered organoclay nanocomposites

article

Biocomposites of nanohydroxyapatite with collagen and poly(vinyl alcohol).

scientific article published on 21 February 2006

Biodiesel synthesis from canola oil via heterogeneous catalysis using functionalized CaO nanoparticles

Biofuel production via transesterification using sepiolite-supported alkaline catalysts

article

Biomass pretreatment strategies via control of rheological behavior of biomass suspensions and reactive twin screw extrusion processing

scientific article published on 19 July 2011

Compounding of thermosets in continuous kneaders

Computational study of chaotic mixing in co-rotating two-tipped kneading paddles: Two-dimensional approach

scholarly article in Polymer Engineering and Science, vol. 33 no. 3, February 1993

Conversion of biomass to fuel: Transesterification of vegetable oil to biodiesel using KF loaded nano-γ-Al2O3 as catalyst

scholarly article by Nezahat Boz et al published July 2009 in Applied Catalysis B: Environmental

Cross-link density, viscoelasticity and swelling of hydrogels as affected by dispersion of multi-walled carbon nanotubes

article

Deformation-induced crystallization and associated morphology development of carbon nanotube-PVDF nanocomposites

scientific article published on 01 May 2009

Development of Mathematical Tools to Determine Optimum Enclosure Designs for Controlling Electromagnetic Fields

Development of Particle Concentration Distributions and Burn Rate Gradients upon Shear-Induced Particle Migration during Processing of Energetic Suspensions

Development of an epoxy based intumescent system comprising of nanoclays blended with appropriate formulating agents

article

Development of cracks in injection moldings of poly (2,6-dimethyl-1, 4 phenylene ether)

article

Development of density distributions in injection molded amorphous engineering plastics. Part I

article

Development of density distributions in injection molded amorphous engineering plastics. Part II

article

Development of experimental techniques and simulation methods to analyze mixing in co-rotating twin screw extrusion

article

Development of extrudate distortions in poly(dimethyl siloxane) and its suspensions with rigid particles

article

Dilatancy of concentrated suspensions with Newtonian matrices

Disposal of chemical munitions using concomitant neutralization, gelation and encapsulation

Distributive mixing of carbon nanotubes in poly(caprolactone) via solution and melt processing: Viscoelasticity and crystallization behavior versus mixing indices

Dynamic assembly of anionic surfactant into highly-ordered vesicles

Dynamics of electrospinning of poly(caprolactone) via a multi-nozzle spinneret connected to a twin screw extruder and properties of electrospun fibers

article

Dynamics of the sub-ambient gelation and shearing of solutions of P3HT and P3HT blends towards active layer formation in bulk heterojunction organic solar cells

scientific article published on 23 December 2020

EXTRUSION AND LUBRICATION FLOWS OF VISCOPLASTIC FLUIDS WITH WALL SLIP

Effect of Shearing on the Crystallization Behavior of Poly (Butylene Terephthalate) and PBT Nanocomposites

Effect of Uniaxial Deformation, Annealing and Carbon Nanotubes on the Morphology and Mechanical Properties of Poly (Butylene Terephthalate) and PBT Nanocomposites

Effect of multistage sonication on dispersive mixing of polymer nanocomposites characterized via shear-induced crystallization behavior

article

Effects of Multiwalled Carbon Nanotubes on the Shear-Induced Crystallization Behavior of Poly(butylene terephthalate)

article

Effects of air entrainment on the rheology of concentrated suspensions during continuous processing

scholarly article in Polymer Engineering and Science, vol. 31 no. 19, October 1991

Effects of dispersion and deformation histories on rheology of semidilute and concentrated suspensions of multiwalled carbon nanotubes

article

Effects of particle shape and size distributions on the electrical and magnetic properties of nickel/polyethylene composites

scholarly article by Halit S. Göktürk et al published 15 December 1993 in Journal of Applied Polymer Science

Effects of segregation on the packing of spherical and nonspherical particles

article

Effects of surface roughness and the chemical structure of materials of construction on wall slip behavior of linear low density polyethylene in capillary flow

Effects of temperature and surface roughness on time‐dependent development of wall slip in steady torsional flow of concentrated suspensions

article

Electric and magnetic properties of a thermoplastic elastomer incorporated with ferromagnetic powders

Electrical properties of composites as affected by the degree of mixedness of the conductive filler in the polymer matrix

article published in 2002

Esterification and transesterification of waste cooking oil over Amberlyst 15 and modified Amberlyst 15 catalysts

scholarly article by Nezahat Boz et al published April 2015 in Applied Catalysis B: Environmental

Estimation of the parameters of Herschel-Bulkley fluid under wall slip using a combination of capillary and squeeze flow viscometers

Evaluation of the treatment of chromite ore processing residue by ferrous sulfate and asphalt

scientific article published on 27 September 2008

Extrusion of poly(ether imide) foams using pressurized CO2: Effects of imposition of supercritical conditions and nanosilica modifiers

scholarly article in Polymer Engineering and Science, vol. 54 no. 9, September 2013

Factors affecting the rheology and processability of highly filled suspensions

scientific article

Flow instabilities in capillary flow of concentrated suspensions

article published in 1994

Foreword

Foreword

Formation of Aluminum Nanoparticles upon Condensation from Vapor Phase for Energetic Applications

scholarly article by R. Schefflan et al published July 2006 in Journal of Energetic Materials

Functionally graded electrospun polycaprolactone and beta-tricalcium phosphate nanocomposites for tissue engineering applications

scientific article

Functionally graded β-TCP/PCL nanocomposite scaffolds:In vitroevaluation with human fetal osteoblast cells for bone tissue engineering

scientific article published on 01 March 2010

Granular magnetic composites employing cobalt based amorphous alloys in a polymeric host

scholarly article by Halit S. Göktürk et al published 15 May 1993 in Journal of Applied Physics

Heat transfer and microstructure in extrusion blowmolding

scholarly article in Polymer Engineering and Science, vol. 23 no. 9, June 1983

High pressure polymerization of ethylene and rheological behavior of polyethylene product

scholarly article in Polymer Engineering and Science, vol. 34 no. 10, May 1994

In vitro analysis and mechanical properties of twin screw extruded single-layered and coextruded multilayered poly(caprolactone) scaffolds seeded with human fetal osteoblasts for bone tissue engineering

scientific article published on 23 August 2011

Injection molding of engineering plastics

Interfacial Load Transfer in Polymer/Carbon Nanotube Nanocomposites with a Nanohybrid Shish Kebab Modification

scientific article published on 28 August 2014

Investigation of the Properties of PEEK-Nanotube Composites Prepared by Solution Methods

Laminin Functionalized Biomimetic Nanofibers For Nerve Tissue Engineering

scientific article published on August 2013

Letter to the Editor: Comments on “A new method of processing capillary viscometry data in the presence of wall slip” [J. Rheol. 47, 337–348 (2003)]

Letter to the editor: Comments on the use of rheometers with rough surfaces or surfaces with protrusions

Load-bearing biodegradable PCL-PGA-beta TCP scaffolds for bone tissue regeneration

scientific article published on 04 August 2020

Load-bearing biodegradable polycaprolactone-poly (lactic-co-glycolic acid)- beta tri-calcium phosphate scaffolds for bone tissue regeneration

scientific article published on 04 February 2019

Machine learning metrology of cell confinement in melt electrowritten three-dimensional biomaterial substrates

scientific article published on 25 March 2019

Mat formation and unstable flows of highly filled suspensions in capillaries and continuous processors

Mathematical Model for a Fed-Batch Crystallization Process for Energetic Crystals to Achieve Targeted Size Distributions

article published in 2006

Mathematical Modeling of Three-Dimensional Die Flows of Viscoplastic Fluids with Wall Slip

Measurement and calculation of parison dimensions and bottle thickness distribution during blow molding

scholarly article in Polymer Engineering and Science, vol. 21 no. 6, April 1981

Mechanisms of mixing in single and co-rotating twin screw extruders

article by Adeniyi Lawal & Dilhan M. Kalyon published September 1995 in Polymer Engineering and Science

Melt Rheology of Two Engineering Thermoplastics: Poly(ether Imide) and Poly(2,6‐Dimethyl‐1,4‐phenylene Ether)

article

Membranes of Polyvinylidene Fluoride and PVDF Nanocomposites with Carbon Nanotubes via Immersion Precipitation

article

Microstrain and Defect Analysis of CL-20 Crystals by Novel X-Ray Methods

Microstructure and ultimate properties of injection molded amorphous engineering plastics: Poly(ether imide) and poly(2,6-dimethyl-1,4-phenylene ether)

scholarly article in Polymer Engineering and Science, vol. 29 no. 18, September 1989

Multifunctional protein-encapsulated polycaprolactone scaffolds: fabrication and in vitro assessment for tissue engineering

scientific article published on 28 May 2009

NOIMISOTHERMAL MODEL OF SINGLE SCREW EXTRUSION OF GENERALIZED NEWTONIAN FLUIDS

article

Nanoclay dispersion into a thermosetting binder using sonication and intensive mixing methods

Nanocomposites of poly(ether ether ketone) with carbon nanofibers: Effects of dispersion and thermo-oxidative degradation on development of linear viscoelasticity and crystallinity

article

Nanocomposites of polyamide-11 and carbon nanostructures: Development of microstructure and ultimate properties following solution processing

article

Nanoporous nanocomposite membranes via hybrid twin-screw extrusion-multijet electrospinning

scientific article published in December 2016

Osteochondral tissue formation through adipose-derived stromal cell differentiation on biomimetic polycaprolactone nanofibrous scaffolds with graded insulin and Beta-glycerophosphate concentrations

scientific article

PORE FORMATION IN THE PYROLYSIS OF POLYMERS TO CERAMICS

Polymer Nanocomposite Processing, Characterization and Applications 2011

Polymer Nanocomposite Processing, Characterization, and Applications

Polymer crystallization and precipitation-induced wrapping of carbon nanofibers with PBT

Processability of organometallic polymer precursors for nonoxide ceramic applications

Processing of Gun Propellants in Continuous Shear Roll Mills

Radially and axially graded multizonal bone graft substitutes targeting critical-sized bone defects from polycaprolactone/hydroxyapatite/tricalcium phosphate

scientific article

Recrystallization of CL-20 and HNFX from Solution for Rigorous Control of the Polymorph Type: Part I, Mathematical Modeling using Molecular Dynamics Method

article

Recrystallization of CL-20 and HNFX from Solution for Rigorous Control of the Polymorph Type: Part II, Experimental Studies

Reverse Kebab Structure Formed inside Carbon Nanofibers via Nanochannel Flow

scientific article published on 27 August 2015

Rheological Characterization of Nitrocellulose Gels

Rheological behavior and self-healing of hydrogen-bonded complexes of a triblock Pluronic® copolymer with a weak polyacid

Rheological behavior of a concentrated suspension: A solid rocket fuel simulant

article by Dilhan M. Kalyon et al published January 1993 in Journal of Rheology

Rheological behavior of concentrated suspensions as affected by the dynamics of the mixing process

article

Rheology and processing of BaSO4-filled medical-grade thermoplastic polyurethane

scholarly article in Polymer Engineering and Science, vol. 44 no. 10, October 2004

Rheology and processing of linear low density polyethylene resins as affected by alpha-olefin comonomers

scholarly article in Polymer Engineering and Science, vol. 28 no. 23, December 1988

Safety in Design and Manufacturing of Extruders Used for the Continuous Processing of Energetic Formulations

Segmental bone replacement via patient-specific, three-dimensional printed bioresorbable graft substitutes and their use as templates for the culture of mesenchymal stem cells under mechanical stimulation at various frequencies

scientific article published on 11 July 2018

Shear viscosity and wall slip behavior of a viscoplastic hydrogel

Shell-core bi-layered scaffolds for engineering of vascularized osteon-like structures

scientific article published on 27 July 2013

Simulation Of The Mixing Of Highly Filled Suspensions In The Co-Rotating Twin Screw Extrusion Process

scholarly article published 9 May 1988

Simulation of Co-Rotating Twin Screw Extrusion Process Subject to Pressure-Dependent Wall Slip at Barrel and Screw Surfaces: 3D FEM Analysis for Combinations of Forward- and Reverse-Conveying Screw Elements

article by M. Malik et al published 28 March 2014 in International Polymer Processing

Simulation of intensity of segregation distributions using three-dimensional fem analysis: Application to corotating twin screw extrusion processing

article by Adeniyi Lawal & Dilhan M. Kalyon published 28 November 1995 in Journal of Applied Polymer Science

Simulation of microstructure development in injection molding of engineering plastics

article

Single screw extrusion of viscoplastic fluids subject to different slip coefficients at screw and barrel surfaces

article

Slip Effects in Capillary and Parallel Disk Torsional Flows of Highly Filled Suspensions

Squeeze Flow Rheometry for Rheological Characterization of Energetic Formulations

article

Step strain flow: Wall slip effects and other error sources

article

Study of Polymorph Prediction For L-Ascorbic Acid

article

Study of Polymorph Prediction for L-Ascorbic Acid [Int. J. Mol. Sci. 2005, 6, 291-302]

scientific article published in 2006

Surface patterning of poly(L-lactide) upon melt processing: in vitro culturing of fibroblasts and osteoblasts on surfaces ranging from highly crystalline with spherulitic protrusions to amorphous with nanoscale indentations

scientific article published on January 2009

The dynamics of parison development in blow molding

article

The rheological behavior of a fast-setting calcium phosphate bone cement and its dependence on deformation conditions

scientific article published on 10 May 2017

Thermal behavior and curing kinetics of poly(carbosilane)

Time-dependent tube flow of compressible suspensions subject to pressure dependent wall slip: Ramifications on development of flow instabilities

article

Twin-Screw Extrusion of Nano-Alumina–Based Simulants of Energetic Formulations Involving Gel-Based Binders

scholarly article by S. Ozkan et al published 8 June 2007 in Journal of Energetic Materials

Ultimate properties of blown films of linear low density polyethylene resins as affected by alpha-olefin comonomers

scholarly article in Polymer Engineering and Science, vol. 28 no. 23, December 1988

Uniaxial Extensional Flow Behavior of a Glass Fiber-Filled Engineering Plastic

Unitary Bioresorbable Cage/Core Bone Graft Substitutes for Spinal Arthrodesis Coextruded from Polycaprolactone Biocomposites

scientific article published on 17 December 2011

Unsteady circular tube flow of compressible polymeric liquids subject to pressure-dependent wall slip

article by H. S. Tang & Dilhan M. Kalyon published March 2008 in Journal of Rheology

Unusual fracture surface morphology of fatigued carbon nanofiber/poly(ether ether ketone) composites

article

Use of Adjustable-Gap On-Line and Off-Line Slit Rheometers for the Characterization of the Wall Slip and Shear Viscosity Behavior of Energetic Formulations

article

Use of molecular dynamics to investigate polymer melt–metal wall interactions

article

Viscoelastic Properties of Dental Pulp Tissue and Ramifications on Biomaterial Development for Pulp Regeneration

scientific article published on 28 August 2015

Viscoelastic and biomechanical properties of osteochondral tissue constructs generated from graded polycaprolactone and beta-tricalcium phosphate composites

scientific article published on September 2010

Viscoelastic behavior of poly(ether imide) incorporated with multiwalled carbon nanotubes

article published in 2012

Viscous heating in nonisothermal die flows of viscoplastic fluids with wall slip

Volume and surface resistivity of low-density polyethylene filled with stainless steel fibres

Wall slip and extrudate distortion of three polymer melts

Paulina is supported by:

About Paulina

Help