Search filters

List of works by Van P. Thompson

A new classification system for all-ceramic and ceramic-like restorative materials

scientific article published on 01 May 2015

Abutment Design for Implant‐Supported Indirect Composite Molar Crowns: Reliability and Fractography ⬇️

scientific article published on June 1, 2012

Additive CAD/CAM process for dental prostheses.

scientific article

Argon-based atmospheric pressure plasma enhances early bone response to rough titanium surfaces

scientific article

Bioinspired design of dental multilayers.

scientific article published in January 2007

Biomechanical evaluation of an anatomically correct all-ceramic tooth-crown system configuration: core layer multivariate analysis incorporating clinically relevant variables.

scientific article published on May 2010

Bond angle effects on microtensile bonds: laboratory and FEA comparison

scientific article published on 9 September 2005

Bond strength to high-crystalline content zirconia after different surface treatments

scientific article published on 01 May 2010

Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability

scientific article published on 01 March 1995

Contact fatigue response of porcelain-veneered alumina model systems

scientific article published on 24 November 2011

Conventional and modified veneered zirconia vs. metalloceramic: fatigue and finite element analysis

scientific article published on 01 June 2012

Corrosion resistance evaluation of a Ca- and P-based bioceramic thin coating in Ti-6Al-4V.

scientific article

Damage and reliability of Y-TZP after cementation surface treatment.

scientific article published on 30 March 2010

Design features of a three-dimensional molar crown and related maximum principal stress. A finite element model study.

scientific article published on 25 October 2009

Durability of resin bonds to a cobalt-chromium alloy

scientific article published on 01 February 1995

Dynamic finite element analysis and moving particle simulation of human enamel on a microscale

scientific article published on 19 October 2014

Effect of core design and veneering technique on damage and reliability of Y-TZP-supported crowns

scientific article published on 8 December 2012

Effect of framework design on crown failure

scientific article published on 01 April 2009

Effect of metal primers on microtensile bond strength between zirconia and resin cements.

scientific article

Effect of sandblasting on the long-term performance of dental ceramics.

scientific article published in November 2004

Effect of water storage time and composite cement thickness on fatigue of a glass-ceramic trilayer system

scientific article published on 01 January 2008

Effects of sandblasting and silica-coating procedures on pure titanium

scientific article published on 01 October 1994

Engineering long term clinical success of advanced ceramic prostheses

scientific article published in January 2007

Etched castings: an improved retentive mechanism for resin-bonded retainers

scientific article published on 01 January 1982

Factorial analysis of variables influencing stress in all-ceramic crowns

scientific article published on 5 July 2005

Failure modes of Y-TZP crowns at different cusp inclines

scientific article published on 09 April 2010

Fatigue and damage accumulation of veneer porcelain pressed on Y-TZP.

scientific article

Fatigue life and failure modes of crowns systems with a modified framework design

scientific article published on 05 May 2010

Fatigue resistance of CAD/CAM resin composite molar crowns

scientific article published on 8 January 2016

Fatigue testing of two porcelain-zirconia all-ceramic crown systems

scientific article published on 22 April 2009

Fracture Modes in Curved Brittle Layers Subject to Concentrated Cyclic Loading in Liquid Environments

scientific article published on March 2009

Fracture modes in human teeth

scientific article (publication date: March 2009)

Fracture of porcelain-veneered structures in fatigue.

scientific article published in February 2007

Hertzian contact response of dentin with loading rate and orientation

scientific article published on 02 May 2008

High modulus nanopowder reinforced dimethacrylate matrix composites for dental cement applications.

scientific article published in September 2007

Impact fracture resistance of two titanium-abutment systems versus a single-piece ceramic implant

scientific article published in June 2011

Improving Fatigue Damage Resistance of Alumina through Surface Grading ⬇️

scientific article published on May 9, 2011

In vitro contact wear of dental composites.

scientific article

Influence of abutment-to-fixture design on reliability and failure mode of all-ceramic crown systems

scientific article published on 06 February 2014

Influence of atmospheric pressure plasma treatment on mechanical proprieties of enamel and sealant bond strength

scientific article

Influence of prolonged thermal cycling and water storage on the tensile bond strength of composite to NiCr alloy

scientific article published on 01 January 1994

Laboratory and FEA evaluation of dentin-to-composite bonding as a function adhesive layer thickness.

scientific article published on 2 April 2008

Level of oral health impacts among patients participating in PEARL: a dental practice‐based research network ⬇️

scientific article published on March 5, 2012

Linear dimensional accuracy of epoxy resin and stone dies

scientific article published on 01 June 1981

Long-term Adhesion Study of Self-etching Systems to Plasma-treated Dentin

scientific article published on 30 June 2015

Marginal fit of leucite-glass pressable ceramic restorations and ceramic-pressed-to-metal restorations.

scientific article

Materials design in the performance of all-ceramic crowns.

scientific article published in June 2004

Microtensile bond strength of resin-based composites to Ti-6Al-4V

scientific article published on 06 January 2009

Modeling of water absorption induced cracks in resin-based composite supported ceramic layer structures.

scientific article published in January 2008

Modified Y-TZP Core Design Improves All-ceramic Crown Reliability ⬇️

scientific article published on November 5, 2010

Nonsurgical treatment of incipient and hidden caries.

scientific article

Off-axis sliding contact reliability and failure modes of veneered alumina and zirconia

scientific article published on 11 February 2009

Outcomes of implants and restorations placed in general dental practices: a retrospective study by the Practitioners Engaged in Applied Research and Learning (PEARL) Network.

scientific article published on July 2014

Performance of dental ceramics: challenges for improvements.

scientific article published on 11 January 2011

Periodontal Diagnosis Affected by Variation in Terminology ⬇️

scientific article published on June 15, 2012

Practice based research networks impacting periodontal care: PEARL Initiative.

scientific article

Practice-Based Research Network Infrastructure Design for Institutional Review Board Risk Assessment and Generalizability of Clinical Results

scientific article published on January 2013

Prevalence of persistent pain 3 to 5 years post primary root canal therapy and its impact on oral health-related quality of life: PEARL Network findings.

scientific article

Reliability and failure modes of implant-supported Y-TZP and MCR three-unit bridges

scientific article published on 31 March 2009

Reliability and failure modes of implant-supported zirconium-oxide fixed dental prostheses related to veneering techniques ⬇️

scientific article published on April 28, 2011

Reliability and failure modes of two Y-TZP abutment designs

scientific article published on 01 January 2015

Reliability of metalloceramic and zirconia-based ceramic crowns.

scientific article published on 26 July 2010

Reliability of reduced-thickness and thinly veneered lithium disilicate crowns.

scientific article published on 28 December 2011

Residual stresses in porcelain-veneered zirconia prostheses ⬇️

scientific article published on May 11, 2012

Residual thermal stress simulation in three-dimensional molar crown systems: a finite element analysis

scientific article published on 01 June 2012

Resin-bonded retainers. Part I: Resin bond to electrolytically etched nonprecious alloys

scientific article published on 01 December 1983

Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition

scientific article published on 01 May 1994

Sandblasting and silica-coating of dental alloys: volume loss, morphology and changes in the surface composition

scientific article published on 01 May 1993

Slow cooling protocol improves fatigue life of zirconia crowns.

scientific article

Surface characterisation and bonding of Y-TZP following non-thermal plasma treatment

scientific article published on 05 October 2012

Surface characterization of Ti and Y-TZP following non-thermal plasma exposure

scientific article published on 28 June 2011

Thermal/mechanical simulation and laboratory fatigue testing of an alternative yttria tetragonal zirconia polycrystal core-veneer all-ceramic layered crown design

scientific article published on 01 April 2010

Paulina is supported by:

About Paulina

Help