Search filters

List of works by Philippe Zysset

A calibration methodology of QCT BMD for human vertebral body with registered micro-CT images ⬇️

scientific article published on May 1, 2011

A comparison of enhanced continuum FE with micro FE models of human vertebral bodies.

scientific article published on 19 January 2009

A finite element analysis of two novel screw designs for scaphoid waist fractures

scientific article published on 2 December 2015

A finite element model of the L5-S1 functional spinal unit: development and comparison with biomechanical tests in vitro

scientific article published in August 2003

A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales.

scientific article published on 15 February 2013

A global relationship between trabecular bone morphology and homogenized elastic properties.

scientific article published on October 1998

A nonlinear QCT-based finite element model validation study for the human femur tested in two configurations in vitro ⬇️

scientific article published on September 14, 2012

A nonlinear finite element model validation study based on a novel experimental technique for inducing anterior wedge-shape fractures in human vertebral bodies in vitro

scientific article published on 11 May 2010

A nonlocal constitutive model for trabecular bone softening in compression.

scientific article published on 18 March 2010

A novel registration-based methodology for prediction of trabecular bone fabric from clinical QCT: A comprehensive analysis

scientific article published on 27 November 2017

A patient-specific finite element methodology to predict damage accumulation in vertebral bodies under axial compression, sagittal flexion and combined loads.

scientific article

A quantitative collagen fibers orientation assessment using birefringence measurements: calibration and application to human osteons

scientific article

A rate-independent continuum model for bone tissue with interaction of compressive and tensile micro-damage

scientific article published on 8 July 2017

A review of morphology-elasticity relationships in human trabecular bone: theories and experiments.

scientific article published on October 2003

A rigorous method for evaluation of the 6D compliance of external fixators

scientific article published on 12 August 2006

Adjustable loop ACL suspension devices demonstrate less reliability in terms of reproducibility and irreversible displacement

scientific article published on 9 November 2017

Age, gender, and bone lamellae elastic moduli.

scientific article published in May 2000

An anisotropic elastic-viscoplastic damage model for bone tissue.

scientific article published on 18 April 2012

An application of nanoindentation technique to measure bone tissue Lamellae properties

scientific article published on 01 December 2005

An experimentally validated finite element method for augmented vertebral bodies

scientific article published on 17 October 2012

An explicit micro-FE approach to investigate the post-yield behaviour of trabecular bone under large deformations

scientific article published on 13 March 2019

An improved technique for inducing compression fractures of vertebral bodies in vitro

article published in 2009

An over-nonlocal implicit gradient-enhanced damage-plastic model for trabecular bone under large compressive strains.

scientific article

Assessing methods for characterising local and global structural and biomechanical properties of the trabecular bone network

scientific article published in January 2011

Assessment of a novel biomechanical fracture model for distal radius fractures

scientific article published on 18 December 2012

Assessment of transverse isotropy in clinical-level CT images of trabecular bone using the gradient structure tensor.

scientific article

Assessment of volume fraction and fabric in the distal radius using HR-pQCT.

scientific article published on 14 July 2009

Biomechanical Role of Bone Anisotropy Estimated on Clinical CT Scans by Image Registration

scientific article published on 20 January 2016

Biomechanical effects of teriparatide in women with osteoporosis treated previously with alendronate and risedronate: results from quantitative computed tomography-based finite element analysis of the vertebral body

scientific article published in October 2009

Bone and Cellular Immune System of Multiparous Sows are Insensitive to Ovariectomy and Nutritive Calcium Shortage

scientific article published on 09 May 2011

Bone volume fraction and fabric anisotropy are better determinants of trabecular bone stiffness than other morphological variables

scientific article published on 01 June 2015

Calcium phosphate cement augmentation after volar locking plating of distal radius fracture significantly increases stability.

scientific article published on 4 August 2013

Cathepsin S controls adipocytic and osteoblastic differentiation, bone turnover, and bone microarchitecture

scientific article published on 26 April 2014

Cement distribution, volume, and compliance in vertebroplasty: some answers from an anatomy-based nonlinear finite element study

scientific article published in July 2008

Characterizing microcrack orientation distribution functions in osteonal bone samples.

scientific article published on 15 July 2016

Clinical Use of Quantitative Computed Tomography (QCT) of the Hip in the Management of Osteoporosis in Adults: the 2015 ISCD Official Positions-Part I.

scientific article published in July 2015

Clinical Use of Quantitative Computed Tomography-Based Advanced Techniques in the Management of Osteoporosis in Adults: the 2015 ISCD Official Positions-Part III.

scientific article

Clinical Use of Quantitative Computed Tomography-Based Finite Element Analysis of the Hip and Spine in the Management of Osteoporosis in Adults: the 2015 ISCD Official Positions-Part II.

scientific article published in July 2015

Clinical versus pre-clinical FE models for vertebral body strength predictions.

scientific article published on 20 December 2012

Comparison of mixed and kinematic uniform boundary conditions in homogenized elasticity of femoral trabecular bone using microfinite element analyses

scientific article published on January 2015

Comparison of proximal femur and vertebral body strength improvements in the FREEDOM trial using an alternative finite element methodology.

scientific article

Compliance of the L5-S1 spinal unit: a comparative study between an unconstrained and a partially constrained system.

scientific article

Compressive fatigue behavior of human vertebral trabecular bone

scientific article published on 26 July 2005

Compressive strength of elderly vertebrae is reduced by disc degeneration and additional flexion.

scientific article published on 11 November 2014

Computational and experimental methodology for site-matched investigations of the influence of mineral mass fraction and collagen orientation on the axial indentation modulus of lamellar bone

scientific article

Continuum damage interactions between tension and compression in osteonal bone

scientific article published on 19 May 2015

DXA predictions of human femoral mechanical properties depend on the load configuration.

scientific article published on 16 May 2013

Damage accumulation in vertebral trabecular bone depends on loading mode and direction

scientific article published on 4 February 2011

Effect of boundary conditions on yield properties of human femoral trabecular bone.

scientific article published on 30 October 2015

Elastic anisotropy of bone lamellae as a function of fibril orientation pattern

scientific article published on 27 April 2010

Elastic anisotropy of human cortical bone secondary osteons measured by nanoindentation.

scientific article published on February 2009

Elastic anisotropy of uniaxial mineralized collagen fibers measured using two-directional indentation. Effects of hydration state and indentation depth.

scientific article

Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur

scientific article published on 01 October 1999

Embedding of human vertebral bodies leads to higher ultimate load and altered damage localisation under axial compression.

scientific article published on 14 December 2012

Estimation of the effective yield properties of human trabecular bone using nonlinear micro-finite element analyses.

scientific article

Estimation of tool pose based on force-density correlation during robotic drilling.

scientific article published on 20 December 2012

European Society of Biomechanics S.M. Perren Award 2016: A statistical damage model for bone tissue based on distinct compressive and tensile cracks.

scientific article

Experimental determination of the emissivity of bone

scientific article published on 04 July 2016

Experimental poromechanics of trabecular bone strength: role of Terzaghi's effective stress and of tissue level stress fluctuations

scientific article published on 29 September 2010

Experimental validation of a nonlinear μFE model based on cohesive-frictional plasticity for trabecular bone

scientific article

Experimental validation of finite element analysis of human vertebral collapse under large compressive strains

scientific article published on April 2014

Extra-articular step osteotomy of the olecranon: A biomechanical assessment.

scientific article published on 16 September 2015

Fabric-based Tsai-Wu yield criteria for vertebral trabecular bone in stress and strain space

scientific article published on 20 July 2012

Fabric-mechanical property relationships of trabecular bone allografts are altered by supercritical CO₂ treatment and gamma sterilization.

scientific article published on 29 March 2011

Fast estimation of Colles' fracture load of the distal section of the radius by homogenized finite element analysis based on HR-pQCT.

scientific article published on 6 January 2017

Finite Element-Based Mechanical Assessment of Bone Quality on the Basis of In Vivo Images

scientific article

Finite element analyses of human vertebral bodies embedded in polymethylmethalcrylate or loaded via the hyperelastic intervertebral disc models provide equivalent predictions of experimental strength

scientific article published on 16 April 2014

Finite element analysis for prediction of bone strength

scientific article published on 07 August 2013

Finite element analysis predicts experimental failure patterns in vertebral bodies loaded via intervertebral discs up to large deformation

scientific article published on 23 April 2015

Finite element based estimation of contact areas and pressures of the human scaphoid in various functional positions of the hand

scientific article published on 6 February 2013

Finite element based nonlinear normalization of human lumbar intervertebral disc stiffness to account for its morphology

scientific article published in June 2014

Frictional interface micromotions and anisotropic stress distribution in a femoral total hip component

scientific article published on 01 June 1993

From high-resolution CT data to finite element models: development of an integrated modular framework

scientific article

HR-pQCT based FE analysis of the most distal radius section provides an improved prediction of Colles' fracture load in vitro ⬇️

scientific article published on August 6, 2010

HR-pQCT-based homogenised finite element models provide quantitative predictions of experimental vertebral body stiffness and strength with the same accuracy as μFE models ⬇️

scientific article published on May 24, 2011

Head-Neck Osteoplasty has Minor Effect on the Strength of an Ovine Cam-FAI Model: In Vitro and Finite Element Analyses.

scientific article published on 17 August 2016

Heterogeneity of bone lamellar-level elastic moduli

scientific article published on 01 June 2000

High resolution quantitative computed tomography-based assessment of trabecular microstructure and strength estimates by finite-element analysis of the spine, but not DXA, reflects vertebral fracture status in men with glucocorticoid-induced osteopo

scientific article published on 10 November 2012

How is the indentation modulus of bone tissue related to its macroscopic elastic response? A validation study

scientific article published on 01 October 2003

Human intervertebral disc stiffness correlates better with the Otsu threshold computed from axial T2 map of its posterior annulus fibrosus than with clinical classifications

scientific article

Hydroxyapatite cement scaffolds with controlled macroporosity: fabrication protocol and mechanical properties

scientific article published on 01 February 2003

Identification of elastic properties of human patellae using micro-finite element analysis.

scientific article published on 30 July 2016

Importance of individual rods and plates in the assessment of bone quality and their contribution to bone stiffness.

scientific article published on 5 April 2006

Improvements in Vertebral Body Strength Under Teriparatide Treatment Assessed In Vivo by Finite Element Analysis: Results From the EUROFORS Study

article

In situ micropillar compression reveals superior strength and ductility but an absence of damage in lamellar bone

scientific article

Increased bone resorption and impaired bone microarchitecture in short-term and extended high-fat diet–induced obesity

scientific article published on 20 February 2010

Indentation of bone tissue: a short review.

scientific article published on June 2009

Influence of Abutment Design on Stiffness, Strength, and Failure of Implant-Supported Monolithic Resin Nano Ceramic (RNC) Crowns

scientific article published on 14 March 2014

Influence of Mineralization and Microporosity on Tissue Elasticity: Experimental and Numerical Investigation on Mineralized Turkey Leg Tendons ⬇️

scientific article published on March 7, 2012

Influence of boundary conditions on computed apparent elastic properties of cancellous bone.

scientific article

Intrinsic bone tissue properties in adult rat vertebrae: modulation by dietary protein

scientific article published on 24 November 2004

Lathyrism-induced alterations in collagen cross-links influence the mechanical properties of bone material without affecting the mineral

scientific article published on 2 September 2011

Loss of bone strength in HLA-B27 transgenic rats is characterized by a high bone turnover and is mainly osteoclast-driven.

scientific article published on 3 March 2015

Mapping anisotropy improves QCT-based finite element estimation of hip strength in pooled stance and side-fall load configurations

scientific article published on 04 July 2018

Measurement of structural anisotropy in femoral trabecular bone using clinical-resolution CT images.

scientific article published on 9 August 2013

Mechanical characterization of brushite and hydroxyapatite cements

scientific article published on 01 November 2001

Mechanical properties of cortical bone and their relationships with age, gender, composition and microindentation properties in the elderly

scientific article published on 4 December 2015

Mechanical restoration and failure analyses of a hydrogel and scaffold composite strategy for annulus fibrosus repair

scientific article published on 11 November 2015

Microindentation can discriminate between damaged and intact human bone tissue ⬇️

scientific article published on January 14, 2012

Modeling and experimental validation of trabecular bone damage, softening and densification under large compressive strains ⬇️

scientific article published on June 20, 2012

Morphology-mechanical property relations in trabecular bone of the osteoarthritic proximal tibia

scientific article published on 01 April 1994

Morphology–elasticity relationships using decreasing fabric information of human trabecular bone from three major anatomical locations ⬇️

scientific article published on October 2, 2012

Multidirectional volar fixed-angle plating using cancellous locking screws for distal radius fractures--evaluation of three screw configurations in an extra-articular fracture model.

scientific article published in January 2011

Nanoindentation discriminates the elastic properties of individual human bone lamellae under dry and physiological conditions

scientific article published on 01 January 2002

Nanoscale deformation mechanisms and yield properties of hydrated bone extracellular matrix

scientific article published on 25 July 2017

New approaches for cement-based prophylactic augmentation of the osteoporotic proximal femur provide enhanced reinforcement as predicted by non-linear finite element simulations.

scientific article published on 2 March 2017

Nonlinear quasi-static finite element simulations predict in vitro strength of human proximal femora assessed in a dynamic sideways fall setup.

scientific article published on 3 December 2015

Not only stiffness, but also yield strength of the trabecular structure determined by non-linear µFE is best predicted by bone volume fraction and fabric tensor

scientific article published on 14 October 2016

OPG-Fc treatment in growing pigs leads to rapid reductions in bone resorption markers, serum calcium, and bone formation markers

scientific article

Osseointegration of ultrafine-grained titanium with a hydrophilic nano-patterned surface: an in vivo examination in miniature pigs

scientific article published on 01 August 2018

Osteoblast- and T cell-mediated RANKL expression does not contribute to age-related osteoclastogenesis in a murine model

Principal stiffness orientation and degree of anisotropy of human osteons based on nanoindentation in three distinct planes.

scientific article

QCT-based finite element models predict human vertebral strength in vitro significantly better than simulated DEXA

article

Quantitative analysis of imprint shape and its relation to mechanical properties measured by microindentation in bone

scientific article published on 9 December 2014

Real-Time Prediction of Temperature Elevation During Robotic Bone Drilling Using the Torque Signal.

scientific article published on 05 May 2017

Rebound-associated vertebral fractures after discontinuation of denosumab-from clinic and biomechanics.

scientific article published on 22 December 2015

Reducing temperature elevation of robotic bone drilling

scientific article published on 24 October 2016

Relationship between ultrasonic parameters and apparent trabecular bone elastic modulus: a numerical approach.

scientific article published on 30 July 2009

Removal of the cortical endplates has little effect on ultimate load and damage distribution in QCT-based voxel models of human lumbar vertebrae under axial compression.

scientific article

Response to the commentary on mechanical properties of cortical bone and their relationships with age, gender, composition and microindentation properties in the elderly.

scientific article published on 3 October 2016

Sampling Sphere Orientation Distribution: an efficient method to quantify trabecular bone fabric on grayscale images

scientific article published on 6 March 2009

Scaling relations between trabecular bone volume fraction and microstructure at different skeletal sites

scientific article published on 20 September 2013

Statistical analysis of the inter-individual variations of the bone shape, volume fraction and fabric and their correlations in the proximal femur.

scientific article published on 18 July 2017

Stiffness, strength, and failure modes of implant-supported monolithic lithium disilicate crowns: influence of titanium and zirconia abutments.

scientific article published on November 2015

Structure-mechanics relationships in mineralized tendons.

scientific article published on April 2015

Temperature Prediction Model for Bone Drilling Based on Density Distribution and In Vivo Experiments for Minimally Invasive Robotic Cochlear Implantation.

scientific article published on 10 September 2015

Tensile and compressive behaviour of the bovine periodontal ligament

scientific article published on 01 January 2004

The Initial Slope of the Variogram, Foundation of the Trabecular Bone Score, Is Not or Is Poorly Associated With Vertebral Strength

scientific article published on August 2015

The effect of standard and low-modulus cement augmentation on the stiffness, strength, and endplate pressure distribution in vertebroplasty.

scientific article published on 15 December 2011

The effective elastic properties of human trabecular bone may be approximated using micro-finite element analyses of embedded volume elements

scientific article published on 26 October 2016

The effects of bone and pore volume fraction on the mechanical properties of PMMA/bone biopsies extracted from augmented vertebrae

scientific article published on 27 August 2011

The influence of yield surface shape and damage in the depth-dependent response of bone tissue to nanoindentation using spherical and Berkovich indenters

scientific article published on 26 September 2013

The mechanical behavior of PMMA/bone specimens extracted from augmented vertebrae: a numerical study of interface properties, PMMA shrinkage and trabecular bone damage

scientific article published on 02 March 2012

The role of cortical shell and trabecular fabric in finite element analysis of the human vertebral body.

scientific article published on November 2009

The role of fabric in the large strain compressive behavior of human trabecular bone

scientific article published on 01 December 2010

The role of fabric in the quasi-static compressive mechanical properties of human trabecular bone from various anatomical locations

scientific article published on 19 January 2007

The skeleton of multiparous sows is protected from effects of ovariectomy and calcium deprivation

Tissue properties of the human vertebral body sub-structures evaluated by means of microindentation.

scientific article published on 9 May 2013

Ultimate force and stiffness of 2-piece zirconium dioxide implants with screw-retained monolithic lithium-disilicate reconstructions.

scientific article

Valid micro finite element models of vertebral trabecular bone can be obtained using tissue properties measured with nanoindentation under wet conditions

scientific article published on 05 March 2010

Validation of a voxel-based FE method for prediction of the uniaxial apparent modulus of human trabecular bone using macroscopic mechanical tests and nanoindentation

scientific article published on 18 June 2007

Validation of an HR-pQCT-based homogenized finite element approach using mechanical testing of ultra-distal radius sections.

scientific article published on 5 August 2010

Validation of an anatomy specific finite element model of Colles’ fracture

article

Vertebral strength prediction with an increased QCT resolution: Densitometry versus FEA

Volar fixed-angle plating of extra-articular distal radius fractures--a biomechanical analysis comparing threaded screws and smooth pegs

scientific article published on 01 November 2010

Where does hip fracture initiate?

scientific article

Where is the distal fracture line location of dorsally displaced distal radius fractures?

scientific article published on 26 October 2010

μCT-based trabecular anisotropy can be reproducibly computed from HR-pQCT scans using the triangulated bone surface.

scientific article published on 18 January 2017

Paulina is supported by:

About Paulina

Help