List of works - Yu Yan

(iv) Tribofilm on hip implants

A Comparison in laser precision drilling of stainless steel 304 with nanosecond and picosecond laser pulses

Adsorption of bovine serum albumin and nanocrystallines on biomedical alloys

Albumin adsorption on CoCrMo alloy surfaces

scientific article

An investigation on the biotribocorrosion behaviour of CoCrMo alloy grafted with polyelectrolyte brush

scientific article published on January 2014

An investigation on the hole quality during picosecond laser helical drilling of stainless steel 304

Bio-tribocorrosion: surface interactions in total joint replacement (TJR)

Biotribocorrosion of CoCrMo orthopaedic implant materials—Assessing the formation and effect of the biofilm

Biotribocorrosion: Some electrochemical observations from an instrumented hip joint simulator

Biotribocorrosion—an appraisal of the time dependence of wear and corrosion interactions: I. The role of corrosion

Biotribocorrosion—an appraisal of the time dependence of wear and corrosion interactions: II. Surface analysis

article

Bone tissue engineering by using a combination of polymer/Bioglass composites with human adipose-derived stem cells ⬇️

scientific article published on 10 January 2014

Corrosion of sintered SiC ceramics in mixed acid solution: temperature and time dependences

Development of a quantitative method for the characterization of hole quality during laser trepan drilling of high-temperature alloy

article

Effect of Corrosion and Biofilm on Friction Behavior in Biotribocorrosion System for Metal-on-Metal Hip Prosthesis

Effect of Relative Humidity on Mechanical Degradation of Medium Mn Steels

scientific article published on 13 March 2020

Effect of annealing temperature on the corrosion behavior of duplex stainless steel studied by in situ techniques

Effect of electrical current on tribological behavior of copper-impregnated metallized carbon against a Cu–Cr–Zr alloy

Effect of electrochemical corrosion on the subsurface microstructure evolution of a CoCrMo alloy in albumin containing environment

Effect of metallic nanoparticles on the biotribocorrosion behaviour of Metal-on-Metal hip prostheses

article published in 2009

Effect of povidone–iodine deposition on tribocorrosion and antibacterial properties of titanium alloy

scholarly article by Yu Yan et al published February 2016 in Applied Surface Science

Effect of proteins on the surface microstructure evolution of a CoCrMo alloy in bio-tribocorrosion processes

scientific article

Effect of pv factor on sliding friction and wear of copper-impregnated metallized carbon

Effect of surface film on sliding friction and wear of copper-impregnated metallized carbon against a Cu–Cr–Zr alloy

Effect of tribology processes on adsorption of albumin

article published in 2015

Eigenstress model for electrochemistry of solid surfaces

scientific article published on 03 June 2016

Electrochemical instrumentation of a hip simulator: a new tool for assessing the role of corrosion in metal-on-metal hip joints

scientific article published in November 2010

Equivalent energy-level structures in stacked metamaterials

Experimental Research on Erosion and Corrosion of WC-Base Matrix Materials for Drill Bits under Impingement of Drilling Muds

Graphene layer effect on protecting the refined surface of transition metal substrate Re(0 0 0 1): A first-principles study

article published in 2018

Growth of passive tribofilms in medical implants

Hydrogen embrittlement assessment of ultra-high strength steel 30CrMnSiNi2

Hydrogen-induced cracking and service safety evaluation for precipitation strengthened austenitic stainless steel as hydrogen storage tank

Hydrogen-induced cracking mechanism of precipitation strengthened austenitic stainless steel weldment

In-situ electrochemical study of interaction of tribology and corrosion in artificial hip prosthesis simulators

Initial formation of corrosion products on pure zinc in saline solution

scientific article published on 11 October 2018

Introduction

Investigation of hydrogen evolution and enrichment by scanning Kelvin probe force microscopy

Ion release during fretting at taper joint interface of hip joint prosthesis

Layer thickness and sequence effects on resonant magnetoelectric coupling in Ni/Pb(Zr,Ti)O3 cylindrical composites

M-16 A New Tool to Assess Corrosion and Metal Ion Release in Artificial Hip Joints

article by Yu Yan et al published June 2010 in Journal of Biomechanics

Microstructure effect on hydrogen-induced cracking in TM210 maraging steel

Nanocrystalline layer on the bearing surfaces of artificial hip implants induced by biotribocorrosion processes

Origin of the moiré superlattice scale lateral force modulation of graphene on a transition metal substrate

scientific article published on 01 June 2018

Passive film-induced stress and mechanical properties of α-Ti in methanol solution

Protein adsorption on implant metals with various deformed surfaces

scientific article published on 8 May 2017

Real-time corrosion measurements to assess biotribocorrosion mechanisms with a hip simulator

article by Yu Yan et al published July 2013 in Tribology International

Release of metal ions from nano CoCrMo wear debris generated from tribo-corrosion processes in artificial hip implants

scientific article published on 30 January 2017

Simultaneous enhancement of strength and plasticity by nano B2 clusters and nano-γ phase in a low carbon low alloy steel

scholarly article by G. Han et al published July 2018 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

Stainless steel pitting and early-stage stress corrosion cracking under ultra-low elastic load

Stress corrosion cracking at low loads: Surface slip and crystallographic analysis

article

Stress corrosion cracking under low stress: Continuous or discontinuous cracks?

Study of the tribocorrosion behaviors of albumin on a cobalt-based alloy using scanning Kelvin probe force microscopy and atomic force microscopy

scholarly article by Yu Yan et al published March 2016 in Electrochemistry Communications

Study of wear-corrosion resistance of Co-based biomaterial

Switchable valley injection into graphene

scholarly article in Physical Review B, vol. 92 no. 11, September 2015

Synovial joint lubrication — does nature teach more effective engineering lubrication strategies? ⬇️

The Antibacterial Efficacy and Biocompatibility of PVP-Iodine Coated Ti-6AL-4V from a Clinical View

The Influence of Microstructure on the Mechanical Properties and Fracture Behavior of Medium Mn Steels at Different Strain Rates

scientific article published on 17 December 2019

The influence of swing phase load on the electrochemical response, friction, and ion release of metal-on-metal hip prostheses in a friction simulator

article

The mechanism of precipitation strengthening in Fe–Ni austenitic alloy electron beam weldment

The role of hard phase carbides in tribocorrosion processes for a Co-based biomedical alloy

The role of hydrogen in stress corrosion cracking of 310 austenitic stainless steel in a boiling MgCl2 solution

Tribo-corrosion analysis of wear and metal ion release interactions from metal-on-metal and ceramic-on-metal contacts for the application in artificial hip prostheses

article

Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments

scholarly article by Yu Yan et al published September 2007 in Wear

Tribocorrosion Behavior of Nanocrystalline Metals — a Review

article

Tribocorrosion in implants—assessing high carbon and low carbon Co–Cr–Mo alloys by in situ electrochemical measurements

Tribofilm formation in biotribocorrosion – does it regulate ion release in metal-on-metal artificial hip joints?

Tribology and tribo-corrosion testing and analysis of metallic biomaterials

Understanding the differences between the wear of metal-on-metal and ceramic-on-metal total hip replacements

scientific article published in April 2008

Understanding the role of corrosion in the degradation of metal-on-metal implants

scientific article

List of works by Yu Yan

(iv) Tribofilm on hip implants

A Comparison in laser precision drilling of stainless steel 304 with nanosecond and picosecond laser pulses

Adsorption of bovine serum albumin and nanocrystallines on biomedical alloys

Albumin adsorption on CoCrMo alloy surfaces

An investigation on the biotribocorrosion behaviour of CoCrMo alloy grafted with polyelectrolyte brush

An investigation on the hole quality during picosecond laser helical drilling of stainless steel 304

Bio-tribocorrosion: surface interactions in total joint replacement (TJR)

Biotribocorrosion of CoCrMo orthopaedic implant materials—Assessing the formation and effect of the biofilm

Biotribocorrosion: Some electrochemical observations from an instrumented hip joint simulator

Biotribocorrosion—an appraisal of the time dependence of wear and corrosion interactions: I. The role of corrosion

Biotribocorrosion—an appraisal of the time dependence of wear and corrosion interactions: II. Surface analysis

Bone tissue engineering by using a combination of polymer/Bioglass composites with human adipose-derived stem cells ⬇️

Corrosion of sintered SiC ceramics in mixed acid solution: temperature and time dependences

Development of a quantitative method for the characterization of hole quality during laser trepan drilling of high-temperature alloy

Effect of Corrosion and Biofilm on Friction Behavior in Biotribocorrosion System for Metal-on-Metal Hip Prosthesis

Effect of Relative Humidity on Mechanical Degradation of Medium Mn Steels

Effect of annealing temperature on the corrosion behavior of duplex stainless steel studied by in situ techniques

Effect of electrical current on tribological behavior of copper-impregnated metallized carbon against a Cu–Cr–Zr alloy

Effect of electrochemical corrosion on the subsurface microstructure evolution of a CoCrMo alloy in albumin containing environment

Effect of metallic nanoparticles on the biotribocorrosion behaviour of Metal-on-Metal hip prostheses

Effect of povidone–iodine deposition on tribocorrosion and antibacterial properties of titanium alloy

Effect of proteins on the surface microstructure evolution of a CoCrMo alloy in bio-tribocorrosion processes

Effect of pv factor on sliding friction and wear of copper-impregnated metallized carbon

Effect of surface film on sliding friction and wear of copper-impregnated metallized carbon against a Cu–Cr–Zr alloy

Effect of tribology processes on adsorption of albumin

Eigenstress model for electrochemistry of solid surfaces

Electrochemical instrumentation of a hip simulator: a new tool for assessing the role of corrosion in metal-on-metal hip joints

Equivalent energy-level structures in stacked metamaterials

Experimental Research on Erosion and Corrosion of WC-Base Matrix Materials for Drill Bits under Impingement of Drilling Muds

Graphene layer effect on protecting the refined surface of transition metal substrate Re(0 0 0 1): A first-principles study

Growth of passive tribofilms in medical implants

Hydrogen embrittlement assessment of ultra-high strength steel 30CrMnSiNi2

Hydrogen-induced cracking and service safety evaluation for precipitation strengthened austenitic stainless steel as hydrogen storage tank

Hydrogen-induced cracking mechanism of precipitation strengthened austenitic stainless steel weldment

In-situ electrochemical study of interaction of tribology and corrosion in artificial hip prosthesis simulators

Initial formation of corrosion products on pure zinc in saline solution

Introduction

Investigation of hydrogen evolution and enrichment by scanning Kelvin probe force microscopy

Ion release during fretting at taper joint interface of hip joint prosthesis

Layer thickness and sequence effects on resonant magnetoelectric coupling in Ni/Pb(Zr,Ti)O3 cylindrical composites

M-16 A New Tool to Assess Corrosion and Metal Ion Release in Artificial Hip Joints

Microstructure effect on hydrogen-induced cracking in TM210 maraging steel

Nanocrystalline layer on the bearing surfaces of artificial hip implants induced by biotribocorrosion processes

Origin of the moiré superlattice scale lateral force modulation of graphene on a transition metal substrate

Passive film-induced stress and mechanical properties of α-Ti in methanol solution

Protein adsorption on implant metals with various deformed surfaces

Real-time corrosion measurements to assess biotribocorrosion mechanisms with a hip simulator

Release of metal ions from nano CoCrMo wear debris generated from tribo-corrosion processes in artificial hip implants

Simultaneous enhancement of strength and plasticity by nano B2 clusters and nano-γ phase in a low carbon low alloy steel

Stainless steel pitting and early-stage stress corrosion cracking under ultra-low elastic load

Stress corrosion cracking at low loads: Surface slip and crystallographic analysis

Stress corrosion cracking under low stress: Continuous or discontinuous cracks?

Study of the tribocorrosion behaviors of albumin on a cobalt-based alloy using scanning Kelvin probe force microscopy and atomic force microscopy

Study of wear-corrosion resistance of Co-based biomaterial

Switchable valley injection into graphene

Synovial joint lubrication — does nature teach more effective engineering lubrication strategies? ⬇️

The Antibacterial Efficacy and Biocompatibility of PVP-Iodine Coated Ti-6AL-4V from a Clinical View

The Influence of Microstructure on the Mechanical Properties and Fracture Behavior of Medium Mn Steels at Different Strain Rates

The influence of swing phase load on the electrochemical response, friction, and ion release of metal-on-metal hip prostheses in a friction simulator

The mechanism of precipitation strengthening in Fe–Ni austenitic alloy electron beam weldment

The role of hard phase carbides in tribocorrosion processes for a Co-based biomedical alloy

The role of hydrogen in stress corrosion cracking of 310 austenitic stainless steel in a boiling MgCl2 solution

Tribo-corrosion analysis of wear and metal ion release interactions from metal-on-metal and ceramic-on-metal contacts for the application in artificial hip prostheses

Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments

Tribocorrosion Behavior of Nanocrystalline Metals — a Review

Tribocorrosion in implants—assessing high carbon and low carbon Co–Cr–Mo alloys by in situ electrochemical measurements

Tribofilm formation in biotribocorrosion – does it regulate ion release in metal-on-metal artificial hip joints?

Tribology and tribo-corrosion testing and analysis of metallic biomaterials

Understanding the differences between the wear of metal-on-metal and ceramic-on-metal total hip replacements

Understanding the role of corrosion in the degradation of metal-on-metal implants

Graphene layer effect on protecting the refined surface of transition metal substrate Re(0 0 0 1): A first-principles study