Search filters

List of works by Luiz Felipe Valandro

A Multicenter Randomized Double-blind Controlled Clinical Trial of Fiber Post Cementation Strategies

scientific article published on 01 March 2018

A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP

scientific article published on 06 April 2015

A study on stress distribution to cement layer and root dentin for post and cores made of CAD/CAM materials with different elasticity modulus in the absence of ferrule

scientific article published on 01 January 2019

Accelerated loading frequency does not influence the fatigue behavior of polymer infiltrated ceramic network or lithium disilicate glass-ceramic restorations

scientific article published on 03 June 2020

Adherence of Streptococcus mutans to uncoated and saliva-coated glass-ceramics and composites.

scientific article published in November 2008

Adhesion between fiber post and root dentin: evaluation of post surface conditioning for bond strength improvement

scientific article published on 01 June 2011

Adhesion to Y-TZP ceramic: study of silica nanofilm coating on the surface of Y-TZP.

scientific article

Adhesion to a Lithium Disilicate Glass Ceramic Etched with Hydrofluoric Acid at Distinct Concentrations

scientific article published on 01 September 2018

Adhesive Cementation Promotes Higher Fatigue Resistance to Zirconia Crowns

scientific article published on 28 November 2016

Air-abrasion using new silica-alumina powders containing different silica concentrations: Effect on the microstructural characteristics and fatigue behavior of a Y-TZP ceramic

scientific article published on 22 May 2019

Air–particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

scientific article published on 17 May 2013

Are posts necessary for the restoration of root filled teeth with limited tissue loss? A structured review of laboratory and clinical studies

scientific article published on September 2015

Bacterial Colonization in the Marginal Region of Ceramic Restorations: Effects of Different Cement Removal Methods and Polishing.

scientific article

Biochemical parameters and anthropometry predict NAFLD in obese children.

scientific article

Bond strength and stability of 3 luting systems on a zirconia-dentin complex.

scientific article

Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments

scientific article published on 05 April 2018

Bond strength durability of a resin composite on a reinforced ceramic using various repair systems

scientific article published on 9 August 2009

Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning

scientific article published on 01 June 2006

Bond strength of acrylic teeth to denture base resin after various surface conditioning methods before and after thermocycling.

scientific article published in March 2007

Bond strength of two resin cements on dentin using different cementation strategies.

scientific article published in August 2010

Bond strength of two resin cements to titanium after different surface conditioning methods

scientific article published on 01 January 2012

Bonding of Y-TZP to dentin: effects of Y-TZP surface conditioning, resin cement type, and aging.

scientific article published on 22 October 2013

Bonding to densely sintered alumina- and glass infiltrated aluminum / zirconium-based ceramics

scientific article published on 01 March 2005

CAD-CAM milled versus pressed lithium-disilicate monolithic crowns adhesively cemented after distinct surface treatments: Fatigue performance and ceramic surface characteristics

scientific article published on 09 March 2019

CAD/CAM machining Vs pre-sintering in-lab fabrication techniques of Y-TZP ceramic specimens: Effects on their mechanical fatigue behavior

scientific article published on 18 March 2017

Canal preparation and filling techniques do not influence the fracture resistance of extensively damaged teeth.

scientific article published in January 2014

Causes of resistant hypertension detected by a standardized algorithm

scientific article published on 24 December 2012

Cementation of fiber post: influence of the cement insertion techniques on the bond strength of the fiber post-root dentin and the quality of the cement layer

scientific article published on 01 November 2010

Ceramic Inlays: Effect of Mechanical Cycling and Ceramic Type on Restoration-dentin Bond Strength

scientific article published on 01 July 2016

Ceramic Surface Treatment with a Single-component Primer: Resin Adhesion to Glass Ceramics.

scientific article

Ceramic firing protocols and thermocycling: effects on the load-bearing capacity under fatigue of a bonded zirconia lithium silicate glass-ceramic

scientific article published on 15 July 2020

Ceramic primer heat-treatment effect on resin cement/Y-TZP bond strength.

scientific article published on 22 May 2012

Clinical outcomes and success rates of quartz fiber post restorations: A retrospective study.

scientific article

Clinical performance and failure modes of pulpless teeth restored with posts: a systematic review.

scientific article published on 3 July 2017

Comparison of different low-temperature aging protocols: its effects on the mechanical behavior of Y-TZP ceramics

scientific article published on 18 February 2016

Comparison of endocrowns made of lithium disilicate glass-ceramic or polymer-infiltrated ceramic networks and direct composite resin restorations: fatigue performance and stress distribution

scientific article published on 19 August 2019

Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers' instructions of the cements only

scientific article published on 26 September 2007

Comparison of resin push-out strength to root dentin of bovine- and human-teeth.

scientific article published in July 2009

Comparison of two bond strength testing methodologies for bilayered all-ceramics.

scientific article published on 17 July 2006

Composite resin to yttria stabilized tetragonal zirconia polycrystal bonding: comparison of repair methods

scientific article published on 07 February 2012

Confocal laser microscopic analysis of biofilm on newer feldspar ceramic.

scientific article

Different Methods for Inlay Production: Effect on Internal and Marginal Adaptation, Adjustment Time, and Contact Point

scientific article published on 12 April 2017

Does Finishing and Polishing of Restorative Materials Affect Bacterial Adhesion and Biofilm Formation? A Systematic Review.

scientific article published in January 2018

Does Luting Strategy Affect the Fatigue Behavior of Bonded Y-TZP Ceramic?

scientific article published on 01 January 2018

Does adhesive resin application contribute to resin bond durability on etched and silanized feldspathic ceramic?

scientific article

Does the bonded cross-sectional surface area affect the microtensile bond strength of resin cement to glass-ceramic?

scientific article published on 01 October 2008

Does the thickness of the resin cement affect the bond strength of a fiber post to the root dentin?

scientific article

Durability of adhesion between feldspathic ceramic and resin cements: effect of adhesive resin, polymerization mode of resin cement, and aging

scientific article published on 4 January 2013

Durability of microtensile bond to nonetched and etched feldspar ceramic: self-adhesive resin cements vs conventional resin

scientific article published on 01 April 2011

Durability of the bond strength of self-adhesive resin cements to human dentin

scientific article published on 01 July 2009

Early biofilm colonization on polished- and glazed-zirconium ceramic surface. Preliminary results.

scientific article

Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes.

scientific article published on 27 January 2011

Effect of Different Surface Treatments of Resin Relined Fiber Posts Cemented With Self-adhesive Resin Cement on Push-out and Microtensile Bond Strength Tests

scientific article published on 27 March 2020

Effect of Ferrule Thickness on Fracture Resistance of Teeth Restored With a Glass Fiber Post or Cast Post

scientific article published on 08 July 2019

Effect of Hydrofluoric Acid Concentration on Resin Adhesion to a Feldspathic Ceramic.

scientific article published on 20 August 2015

Effect of Intracanal Irrigants on Bond Strength of Fiber Posts Cemented With a Self-adhesive Resin Cement.

scientific article

Effect of Post-Space Irrigation with NaOCl And CaOCl at Different Concentrations on the Bond Strength of Posts Cemented with a Self-Adhesive Resin Cement

scientific article published on 01 September 2018

Effect of Resin Luting Systems and Alumina Particle Air Abrasion on Bond Strength to Zirconia

scientific article published on 01 May 2018

Effect of acid neutralization and mechanical cycling on the microtensile bond strength of glass-ceramic inlays

scientific article published on 01 March 2009

Effect of adhesive system type and tooth region on the bond strength to dentin.

scientific article

Effect of brushing with conventional versus whitening dentifrices on surface roughness and biofilm formation of dental ceramics

scientific article published on 01 May 2012

Effect of ceramic etching protocols on resin bond strength to a feldspar ceramic

scientific article published on 23 December 2014

Effect of ceramic surface treatment on the microtensile bond strength between a resin cement and an alumina-based ceramic.

scientific article published in January 2004

Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia

scientific article published on 6 November 2017

Effect of cleansing methods on saliva-contaminated zirconia--an evaluation of resin bond durability

scientific article published on 19 August 2014

Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent

scientific article

Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions

scientific article published on 01 April 2008

Effect of coronal macroretentions and diameter of a glass-FRC on fracture resistance of bovine teeth restored with fiber posts

scientific article published on 01 March 2009

Effect of cyclic loading on fracture strength and microleakage of a quartz fiber dowel with different adhesive, cement and resin core material combinations

article

Effect of etching with distinct hydrofluoric acid concentrations on the flexural strength of a lithium disilicate-based glass ceramic.

scientific article published on 5 February 2016

Effect of fiber posts with different emerging diameters on the fracture strength of restored crownless teeth

scientific article published on 01 March 2011

Effect of grinding and aging on subcritical crack growth of a Y-TZP ceramic

scientific article published on 03 May 2018

Effect of grinding and heat treatment on the mechanical behavior of zirconia ceramic

scientific article published on 15 December 2015

Effect of grinding with diamond-disc and -bur on the mechanical behavior of a Y-TZP ceramic

scientific article published on 15 May 2014

Effect of low-temperature aging on the mechanical behavior of ground Y-TZP.

scientific article published on 25 December 2014

Effect of mechanical cycling on the push-out bond strength of fiber posts adhesively bonded to human root dentin.

scientific article published in November 2007

Effect of post length on the fatigue resistance of bovine teeth restored with bonded fiber posts: a pilot study.

scientific article published in September 2006

Effect of post-silanization heat treatments of silanized feldspathic ceramic on adhesion to resin cement

scientific article published on 01 October 2013

Effect of resin cement space on the fatigue behavior of bonded CAD/CAM leucite ceramic crowns

scientific article published on 01 June 2020

Effect of root canal preparation, type of endodontic post and mechanical cycling on root fracture strength

scientific article

Effect of root canal treatments on quartz fiber posts bonding to root dentin

scientific article published on 20 July 2006

Effect of seating forces on cement-ceramic adhesion in microtensile bond tests

scientific article published on 13 January 2012

Effect of silane coupling agents and alloy primers on adhesion to titanium

scientific article published on September 1, 2011

Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic.

scientific article published on October 2010

Effect of surface treatment of brackets and mechanical cycling on adhesion to enamel

Effect of surface treatments on the resin bond to zirconium-based ceramic.

scientific article

Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test

scientific article published on 01 November 2008

Effect of the layering technique on bond strength and cohesive resistance of a porcelain-zirconia system

scientific article published on 01 February 2014

Effect of thermocycling on the bond strength of a glass-infiltrated ceramic and a resin luting cement

scientific article published on 01 March 2003

Effect of two resin cements and two fiber post surface treatments on push-out bond strength between fiber post and root dentin.

scientific article published in January 2015

Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging.

scientific article

Effect of zirconia polycrystal and stainless steel on the wear of resin composites, dentin and enamel

scientific article published on 21 December 2018

Effect of zirconia surface treatment, resin cement and aging on the load-bearing capacity under fatigue of thin simplified full-contour Y-TZP restorations

scientific article published on 26 April 2019

Effects of Surface Treatments on the Bond Strength Between Resin Cement and a New Zirconia-reinforced Lithium Silicate Ceramic.

scientific article published on 11 December 2015

Effects of mechanical cycling on the bonding of zirconia and fiber posts to human root dentin.

scientific article published in June 2007

Effects of two grading techniques of zirconia material on the fatigue limit of full-contour 3-unit fixed dental prostheses

scientific article published on 21 January 2017

Elastic Properties of Lithium Disilicate Versus Feldspathic Inlays: Effect on the Bonding by 3D Finite Element Analysis

scientific article published on 03 October 2016

Endodontic Irrigation Protocols: Effects on Bonding of Adhesive Systems to Coronal Enamel and Dentin.

scientific article

Endodontic Sealers Affect the Bond Strength of Fiber Posts and the Degree of Conversion of Two Resin Cements

scientific article published on 01 January 2018

Environmental and biological monitoring of occupational formaldehyde exposure resulting from the use of products for hair straightening

scientific article published on 09 September 2015

Evaluation of four cementation strategies on the push-out bond strength between fiber post and root dentin

scientific article published on 01 November 2011

Evaluation of genotoxicity in workers exposed to low levels of formaldehyde in a furniture manufacturing facility.

scientific article published on 13 May 2015

Evaluation of marginal leakage after mechanical fatigue cycling of composite inlays luted with different cements

scientific article published in July 2018

Evaluation of resin bond strength to yttria-stabilized tetragonal zirconia and framework marginal fit: comparison of different surface conditionings.

scientific article

Evaluation of tensile retention of Y-TZP crowns after long-term aging: effect of the core substrate and crown surface conditioning

scientific article published on 08 May 2014

Evaluation of tensile retention of Y-TZP crowns cemented on resin composite cores: effect of the cement and Y-TZP surface conditioning.

scientific article published on 27 August 2014

Evaluation of the flexural strength of carbon fiber-, quartz fiber-, and glass fiber-based posts

scientific article published in March 2005

Fatigue Failure Load of Lithium Disilicate Restorations Cemented on a Chairside Titanium-Base

scientific article published on 25 May 2018

Fatigue Failure Load of Resin-bonded Simplified Lithium Disilicate Glass-Ceramic Restorations: Effect of Ceramic Conditioning Methods

scientific article published on 01 January 2019

Fatigue Failure Load of Restored Premolars: Effect of Etching the Intaglio Surface of Ceramic Inlays With Hydrofluoric Acid at Different Concentrations

article

Fatigue Failure Load of a Bonded Simplified Monolithic Feldspathic Ceramic: Influence of Hydrofluoric Acid Etching and Thermocycling

scientific article published on 03 December 2019

Fatigue Resistance of Y-TZP/Porcelain Crowns is Not Influenced by the Conditioning of the Intaglio Surface.

scientific article

Fatigue behavior and colorimetric differences of a porcelain-veneered zirconia: effect of quantity and position of specimens during firing

scientific article published on 06 October 2020

Fatigue behavior of Y-TZP ceramic after surface treatments

article

Fatigue failure load and finite element analysis of multilayer ceramic restorations

scientific article published on 15 November 2018

Fatigue failure load of an adhesively-cemented lithium disilicate glass-ceramic: Conventional ceramic etching vs etch & prime one-step primer

article

Fatigue failure load of feldspathic ceramic crowns after hydrofluoric acid etching at different concentrations.

scientific article published on 26 May 2017

Fatigue failure load of two resin-bonded zirconia-reinforced lithium silicate glass-ceramics: Effect of ceramic thickness

article

Fatigue failure load of zirconia-reinforced lithium silicate glass ceramic cemented to a dentin analogue: Effect of etching time and hydrofluoric acid concentration.

scientific article published on 23 September 2017

Fatigue limit of monolithic Y-TZP three-unit-fixed dental prostheses: Effect of grinding at the gingival zone of the connector

scientific article published on 07 March 2017

Fatigue limit of polycrystalline zirconium oxide ceramics: Effect of grinding and low-temperature aging

article

Fatigue performance of adhesively cemented glass-, hybrid- and resin-ceramic materials for CAD/CAM monolithic restorations

scientific article published on 25 January 2019

Fatigue performance of fully-stabilized zirconia polycrystals monolithic restorations: The effects of surface treatments at the bonding surface

scientific article published on 10 July 2020

Fatigue resistance of bovine teeth restored with resin-bonded fiber posts: effect of post surface conditioning.

scientific article published in January 2008

Fatigue resistance of teeth restored with fiber posts and different post cementation strengths

scientific article published on 01 May 2009

Fatigue resistance of the bond of a glass-infiltrated alumina ceramic to human dentin

article

Fatigue strength of several dental ceramics indicated for CAD-CAM monolithic restorations

article

Fatigue strength of yttria-stabilized zirconia polycrystals: Effects of grinding, polishing, glazing, and heat treatment.

scientific article published on 15 June 2017

Fatigue surviving, fracture resistance, shear stress and finite element analysis of glass fiber posts with different diameters.

scientific article

Fiber post cementation strategies: effect of mechanical cycling on push-out bond strength and cement polymerization stress

scientific article published on 01 August 2012

Fiber-matrix integrity, micromorphology and flexural strength of glass fiber posts: Evaluation of the impact of rotary instruments.

scientific article published on 17 April 2015

Flexural strength of glass-infiltrated zirconia/alumina-based ceramics and feldspathic veneering porcelains

scientific article published on 08 May 2009

Fractographical Analysis and Biomechanical Considerations of a Tooth Restored With Intracanal Fiber Post: Report of the Fracture and Importance of the Fiber Arrangements.

scientific article

Fracture resistance of bovine incisors restored with different glass fiber posts: Effect of the diameter of fiber post ⬇️

scientific article published on September 1, 2012

Fracture resistance of weakened roots restored with different intracanal retainers

scientific article published in May 2015

Fracture strength of endodontically treated teeth restored with different strategies after mechanical cycling

scientific article published on 01 March 2012

Fracture strength of endodontically-treated teeth restored with post and cores and composite cores only

scientific article published on 01 July 2009

Grinding With Diamond Burs and Hydrothermal Aging of a Y-TZP Material: Effect on the Material Surface Characteristics and Bacterial Adhesion.

scientific article published on 4 October 2017

Grinding the intaglio surface of yttria partially- and fully-stabilized zirconia polycrystals restorations: Effect on their fatigue behavior

scientific article published on 18 April 2020

Grinding, polishing and glazing of the occlusal surface do not affect the load-bearing capacity under fatigue and survival rates of bonded monolithic fully-stabilized zirconia simplified restorations

scientific article published on 11 November 2019

Hard machining, glaze firing and hydrofluoric acid etching: Do these procedures affect the flexural strength of a leucite glass-ceramic?

scientific article published on 2 May 2015

High load frequency at 20Hz: Its effects on the fatigue behavior of a leucite-reinforced glass-ceramic

scientific article published on 03 April 2020

How does hydrofluoric acid etching affect the cyclic load-to-failure of lithium disilicate restorations?

scientific article published on 30 July 2018

Hydrofluoric acid concentrations: Effect on the cyclic load-to-failure of machined lithium disilicate restorations

scientific article published on 19 July 2018

Impact of machining on the flexural fatigue strength of glass and polycrystalline CAD/CAM ceramics.

scientific article published on 14 August 2017

Impact of surface finishes on the flexural strength and fracture toughness of In-Ceram Zirconia

scientific article published on 01 March 2012

Improved adhesion of Y-TZP ceramics: a novel approach for surface modification

scientific article published in January 2014

In vitro wear of a zirconium-reinforced lithium silicate ceramic against different restorative materials

scientific article published on 19 August 2019

Influence of Endodontic Treatment and Retreatment on the Fatigue Failure Load, Numbers of Cycles for Failure, and Survival Rates of Human Canine Teeth

scientific article published on 20 October 2017

Influence of Surface Conditioning Protocols on Glass-Fiber Post Adhesion Performance After Aging and Flexural Strength

Influence of cement thickness and mechanical cycling on the push-out bond strength between posts and root dentin

scientific article published on 01 July 2011

Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic

scientific article published on 01 December 2006

Influence of finishing/polishing on the fatigue strength, surface topography, and roughness of an yttrium-stabilized tetragonal zirconia polycrystals subjected to grinding

scientific article published on 13 February 2019

Influence of insertion techniques for resin cement and mechanical cycling on the bond strength between fiber posts and root dentin.

scientific article published in April 2015

Influence of periodontal ligament simulation on bond strength and fracture resistance of roots restored with fiber posts

scientific article published in September 2014

Influence of remaining coronal thickness and height on biomechanical behavior of endodontically treated teeth: survival rates, load to fracture and finite element analysis.

scientific article

Influence of shading technique on mechanical fatigue performance and optical properties of a 4Y-TZP ceramic for monolithic restorations

scientific article published on 28 September 2019

Influence of zirconia surface treatments of a bilayer restorative assembly on the fatigue performance

scientific article published on 06 October 2020

Inlays made from a hybrid material: adaptation and bond strengths.

scientific article

Internal adjustments decrease the fatigue failure load of bonded simplified lithium disilicate restorations

article

Isomorphism of quasispecies and percolation models

scientific article published in February 2000

Lithium disilicate glass-ceramic vs translucent zirconia polycrystals bonded to distinct substrates: Fatigue failure load, number of cycles for failure, survival rates, and stress distribution

scientific article published on 12 December 2018

Load-bearing capacity under fatigue and survival rates of adhesively cemented yttrium-stabilized zirconia polycrystal monolithic simplified restorations

scientific article published on 12 November 2018

Loading frequencies up to 20Hz as an alternative to accelerate fatigue strength tests in a Y-TZP ceramic.

scientific article published on 20 January 2016

Longevity of metal-ceramic crowns cemented with self-adhesive resin cement: a prospective clinical study

scientific article published on 10 April 2017

Low-Fusing Porcelain Glaze Application on 3Y-TZP Surfaces can Enhance Zirconia-Porcelain Adhesion

scientific article published on September 2016

Low-fusing porcelain glaze application does not damage the fatigue strength of Y-TZP

scientific article published on 20 July 2019

Low-temperature degradation of Y-TZP ceramics: A systematic review and meta-analysis.

scientific article published on 31 October 2015

Low-temperature degradation of a Y-TZP ceramic after surface treatments

scientific article published on 16 September 2013

Marginal gap, cement thickness, and microleakage of 2 zirconia crown systems luted with glass ionomer and MDP-based cements

scientific article

Mechanical behavior of a Y-TZP ceramic for monolithic restorations: effect of grinding and low-temperature aging.

scientific article published on 22 February 2016

Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystal: Effects of different aging regimens.

scientific article

Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystalline ceramic after different zirconia surface treatments

scientific article published on 04 April 2017

Mechanical fatigue cycling on teeth restored with fiber posts: impact of coronal grooves and diameter of glass fiber post on fracture resistance.

scientific article published in October 2011

Mechanical performance of Y-TZP monolithic ceramic after grinding and aging: Survival estimates and fatigue strength

scientific article published on 31 July 2018

Mechanical reliability, fatigue strength and survival analysis of new polycrystalline translucent zirconia ceramics for monolithic restorations

scientific article published on 23 May 2018

Micro-morphological changes prior to adhesive bonding: high-alumina and glassy-matrix ceramics.

scientific article published in April 2008

Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment.

scientific article

Microstructure, topography, surface roughness, fractal dimension, internal and marginal adaptation of pressed and milled lithium-disilicate monolithic restorations

scientific article published on 15 June 2019

Microtensile bond strength between a quartz fiber post and a resin cement: effect of post surface conditioning.

scientific article published in April 2006

Microtensile bond strength between indirect composite resin inlays and dentin: effect of cementation strategy and mechanical aging

scientific article published in August 2014

Microtensile bond strength of a repair composite to leucite-reinforced feldspathic ceramic.

scientific article

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

scientific article published on 26 December 2006

Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning.

scientific article published on 21 July 2005

Microtensile bond strength of a resin cement to silica-coated and silanized In-Ceram Zirconia before and after aging

scientific article published on 01 January 2007

Microtensile bond strength of light- and self-cured adhesive systems to intraradicular dentin using a translucent fiber post.

scientific article published in July 2005

Microtensile bond strength of photoactivated and autopolymerized adhesive systems to root dentin using translucent and opaque fiber-reinforced composite posts

scientific article published in March 2007

Multi-step adhesive cementation versus one-step adhesive cementation: push-out bond strength between fiber post and root dentin before and after mechanical cycling

scientific article published on 01 September 2011

Newer vs. older CAD/CAM burs: Influence of bur experience on the fatigue behavior of adhesively cemented simplified lithium-disilicate glass-ceramic restorations

scientific article published on 09 April 2019

One-step ceramic primer as surface conditioner: Effect on the load-bearing capacity under fatigue of bonded lithium disilicate ceramic simplified restorations

scientific article published on 09 February 2020

Optical devices for the detection of cyanide in water based on ethyl(hydroxyethyl)cellulose functionalized with perichromic dyes.

scientific article published on 14 November 2016

Optimization of two-joint arm movements: a model technique or a result of natural selection?

scientific article

Photophysical Behavior of Isocyanine/Clay Hybrids in the Solid State †.

scientific article published on 8 January 2017

Pilot evaluation of four experimental conditioning treatments to improve the bond strength between resin cement and Y-TZP ceramic

scientific article published on 01 February 2011

Polishing methods of an alumina-reinforced feldspar ceramic.

scientific article published in January 2006

Polishing of Ground Y-TZP Ceramic is Mandatory for Improving the Mechanical Behavior

scientific article published on 01 September 2018

Preliminary results of the survival and fracture load of roots restored with intracanal posts: weakened vs nonweakened roots

scientific article published on 06 February 2014

Pressable feldspathic inlays in premolars: effect of cementation strategy and mechanical cycling on the adhesive bond between dentin and restoration

scientific article published in April 2014

Resin Bonding to a Hybrid Ceramic: Effects of Surface Treatments and Aging

scientific article published on 12 August 2015

Resin bonding to a feldspar ceramic after different ceramic surface conditioning methods: evaluation of contact angle, surface pH, and microtensile bond strength durability.

scientific article published in December 2011

Resin bonding to root canal dentin: effect of the application of an experimental hydrophobic resin coating after an all-in-one adhesive.

scientific article

Resin microtensile bond strength to feldspathic ceramic: hydrofluoric acid etching vs. tribochemical silica coating

scientific article published on 01 September 2007

Retentive Strength of Y-TZP Crowns: Comparison of Different Silica Coating Methods on the Intaglio Surfaces.

scientific article

Root canal filling: fracture strength of fiber-reinforced composite-restored roots and finite element analysis.

scientific article published in November 2013

SEM evaluation of in situ early bacterial colonization on a Y-TZP ceramic: a pilot study

article

Sequential usage of diamond bur for CAD/CAM milling: Effect on the roughness, topography and fatigue strength of lithium disilicate glass ceramic

scientific article published on 27 December 2018

Shear bond strength of resin cement bonded to alumina ceramic after treatment by aluminum oxide sandblasting or silica coating

scientific article published on 31 August 2011

Silica coating followed by heat-treatment of MDP-primer for resin bond stability to yttria-stabilized zirconia polycrystals

scientific article published on 8 March 2018

Silica infiltration in partially stabilized zirconia: Effect of hydrothermal aging on mechanical properties

scientific article published on 11 April 2020

Stable Resin Bonding to Y-TZP Ceramic with Air Abrasion by Alumina Particles Containing 7% Silica

scientific article published on 01 January 2020

Strength of a Zirconia-Reinforced Lithium Silicate Ceramic: Acid-Etching Time and Resin Cement Application Effects

scientific article published on 01 May 2019

Strength of a feldspar ceramic according to the thickness and polymerization mode of the resin cement coating

scientific article published on 20 May 2011

Surface Treatments of Zirconia to Enhance Bonding Durability

scientific article published on 07 July 2015

Surface conditioning of a composite used for inlay/onlay restorations: effect on muTBS to resin cement.

scientific article published in December 2007

Surface micro-morphology, phase transformation, and mechanical reliability of ground and aged monolithic zirconia ceramic.

scientific article published on 24 October 2016

Surface roughness and bacterial adherence to resin composites and ceramics.

scientific article published in January 2009

Surface treatments of a glass-fiber reinforced composite: Effect on the adhesion to a composite resin

scientific article published on 09 November 2019

Survival rate and load to failure of premolars restored with inlays: An evaluation of different inlay fabrication methods

Survival rate, load to fracture, and finite element analysis of incisors and canines restored with ceramic veneers having varied preparation design

scientific article published on 06 February 2014

Surviving of bovine teeth adhesively restored with 3 types of fiber post after fatigue resistance

scientific article published on 01 June 2011

The Disk-Specimen Thickness Does Not Influence the Push-Out Bond Strength Results Between Fiber Post and Root Dentin

The Influence of Ceramic Re-pressing on Surface Properties, Bond Strength, and Color Stability of Leucite Ceramic

scientific article published on 01 January 2018

The effect of adhesive systems on the pullout strength of a fiberglass-reinforced composite post system in bovine teeth

scientific article published in January 2005

The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic

scientific article published on 01 March 2005

The effect of grinding on the mechanical behavior of Y-TZP ceramics: A systematic review and meta-analyses.

scientific article

The effect of hydrofluoric acid concentration on the fatigue failure load of adhesively cemented feldspathic ceramic discs.

scientific article published on 31 January 2018

The effect of mechanical loading on the cusp defection of premolars restored with direct and indirect techniques.

scientific article

The effect of porcelain thickness and surface liner application on the fracture behavior of a ceramic system.

scientific article published on 25 June 2011

The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns.

scientific article

The potential of novel primers and universal adhesives to bond to zirconia.

scientific article published on 15 November 2013

Tribochemical Glass Ceramic Coating as a New Approach for Resin Adhesion to Zirconia

scientific article published on 23 September 2016

Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics.

scientific article published on 9 June 2008

[Effect of surface treatment of a glass-infiltrated alumina ceramic on the microtensile bond strength]

scientific article published on 01 December 2003

Paulina is supported by:

About Paulina

Help